Question about 1995 Eagle Vision
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It is well buried. You will find the tail end of it just above and rearward of the driver's side motor mount. It is fastene to the trans bell housing. There is probably a trans line support bracket/plate you will need to remove usually mounted to the middle stud. Be sure to disconnect the battery before you start because the cable is connected directly to battery. There also should be a shim plate between the nose mounting and transmission bell housing. That shim can be a pain but it does prevent premature wear to the flywheel ring gear. (it only fits one way) Those starter solonoids are a common failure item. (only gives a click, or sometimes not even that, when trying to crank.) Let me know if this is helpful
Posted on Apr 03, 2009
Your fans (low and high) have number of parts.
1. Temputure sensor
2. Hi and Lo fan relays (PCM)
3. Relay located in the fan assembly itself
If you car over heats either in idle or when you turn the air conditioner you are having an eletrical issue. The fix is easy but can take some time, rewireing and a relay.
Hope this helps
Posted on May 18, 2009
yes propane or carb spray will work, just spray around the entire intake area and all vacuum hoses, if u hit a vacuum leak the engine idle will change.
Posted on Nov 25, 2009
just unplug the battery and wait 30 minutes to be safe. once air bag is disconnected at the air bag it is pretty safe.make sure you store it face up. meaning store with electrical connector part down
Posted on Mar 28, 2010
Testimonial: "Thanks alot!"
SOURCE: MY 1995 EAGLE VISION STALLS OUT
Find the EGR valve. Look up on the internet what it looks like and where it is located for your car. There will be a vacuum hose attached to it. start the car when the engine is cold. when it gets to running temperature and starts to stall, pull the vacuum line off. If the EGR is bad, the car will keep running and idle will return to normal.
Posted on May 26, 2010
Tips for a great answer:
Jul 24, 2011 | 1995 Eagle Vision
Jan 16, 2011 | 1995 Eagle Vision
Dec 23, 2010 | 1995 Eagle Vision
Jan 11, 2010 | 1995 Eagle Vision
Sep 04, 2009 | 1995 Eagle Vision
22 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: