Question about 2005 Nissan Maxima

Open Question

2005 maxima hi and low beam not working. all of a suddan clickes at the relay

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

motor1258
  • 6674 Answers

SOURCE: 2000 nissan maxima low beams (both) failed, high

Check fuse panel as well as power distribution under hood , it may be on a separate fuse.

Posted on May 12, 2009

  • 1596 Answers

SOURCE: '91 Nissan low beam

What you have sounds like a Headlight SWITCH Problem, You can check the Fuse for them (DOUBTFULL) but its a Large one @ Power distribution Box Under Hood.

Posted on Jul 12, 2009

fixitriteman
  • 431 Answers

SOURCE: 350 z low beam not working

under hood there is a fuse box the cover of it should show what is what test fuse with lights on or take out and look closely at it if that don't fix it look 4 a grownd coming off the light plug with a cheep test light you can test both if you need to know more how just ask

Posted on Mar 12, 2010

Zim1308
  • 543 Answers

SOURCE: I have a 2005 nissan altima 2.5 four cylinder

No, it is not likely that hte relay is bad. since you are getting power to that passenger side lamp you are getting power from the fuse block and the battery, the problem lays in the bulb itself or the power/ ground wire to the lamp socket. You need to do a continuity check on the power line and then check the ground for that lamp. You should be able to narrow it down to one of those two things from that and repair the wire or lose ground. Although my money is on a bad wire from power to the lamp socket.

Posted on Apr 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Ford Falcon 2005 low beam headlights aren't working, however the high beams and park lights work fine. Please help.


The relays are next to your battery. The first one is the horn relay (the yellow one closest to the headlight), then the lo and high beams after that, I forgot which order, and then the starter relay.

Get a freind to check which one clicks when you turn on the high beams (put your finger on it), and swap it over with the one next to it.

Check to see if the headlights work, but the high beams not. If this is the case, the relay is fried. If the high beams are still not working, then check the contacts in the combination switch (on the steering column), or the wiring... this is a bit more difficult to trace, none the less, not that difficult.

Dec 28, 2016 | 2005 Ford Falcon

1 Answer

2005 buick lesabre low beams not working at night daytime running lights work hi beams work dimmer switch works relays and fuses are good. what do I check now and how?


It's the dimmer switch. Which is called the multifunction switch or turn signal switch. Just because it clicks, doesn't mean the it is working properly. If you click and the high beams come on, then click it again and have no low beams, replace the switch. Daytime running lights are controlled by the Body control module.

Oct 16, 2014 | 2005 Buick LeSabre

1 Answer

Low beams don t work but high beams work


Hi and low beams run on different fuses too. Check the low beam fuse. There might be a grounding strap not making good connection too.

Aug 27, 2014 | 1987 Toyota Camry

1 Answer

2005 navigator high beams work but low beams don't


First thing check to see that low beams are not blown....if not could be switch or relay problem...good luck and hope info helps....please rate my post...

Aug 16, 2012 | 2000 Chrysler 300M

1 Answer

Both headlights stopped working on my 2005 santa fe highbeams work fine where do i begin troubleshooting problems?


First check the 15 amp H/LP (LOW) fuse in the engine compartment relay box. If good, try switching the high beam relay (same box as the fuse) with the low beam relay. If that gets your low beams to work, you need a relay. Please let me know if this doesn't work or if you have any questions.

b7b8dbf.gif

Oct 29, 2010 | 2005 Hyundai Sonata

1 Answer

2005 Dodge caravan. The Headlights are not staying on. When we turn the switch, sometimes they come on, sometimes they do not. It's getting worse.


Hello, on the van you have a high beam fuse and relay. On the low beam you also have a fuse and relay. Check the fuse/relay panel for a blown fuse controlling the low beam lights. If you do not find a blown fuse have some one to turn the key on and turn on the high beam lights. During this time locate the low beam headlight relay and place your finger on top of relay, have the other person to switch from high beam to low beam lights. You should feel a click in the relay when they make the switch from high to low beam. If not replace the relay and the problem should go away. Hope this will help you.

Thanks

Aug 14, 2010 | 2005 Dodge Caravan

1 Answer

I have a 2005 dodge caravan. the headlights have


On the van you have a high beam fuse and relay. On the low beam you also have a fuse and relay. Check the fuse/relay panel for a blown fuse controlling the low beam lights. If you do not find a blown fuse have some one to turn the key on and turn on the high beam lights> During this time locate the low beam headlight relay and place your finger on top of relay, have the other person to switch from high beam to low beam lights. You should feel a click in the relay when they make the switch from high to low beam. If not replace the relay and the problem should go away. Hope this will help you.

May 28, 2010 | 2005 Dodge Caravan

2 Answers

The low-beam headlights in my 2005 LaCrosse won't work,but high beams do,What would cause this?


there is a relay in the fuse panel located under the hood its called the HDM RELAY # 34 .

Oct 09, 2009 | 2005 Buick LaCrosse

1 Answer

2005 trailblazer headlights go off ocasionally


the click you are talking about is the high beam relay.
you nedd to get a tester or voltmeter and check the sockets for 12v.
there has been instances where both low beam bulbs went at once.
do the daytime running lights work?
if not,supect the daytime module...it is also wired into the parking brake.
if you put the park brake on first,then start the vehicle,the dtr do not come on

May 13, 2009 | 2005 Chevrolet Trailblazer Ext

Not finding what you are looking for?
2005 Nissan Maxima Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...