Question about 2006 Chevrolet Impala

Open Question

How to remove rear bumper cover on 2007 Chevrolet Impala

Posted by Anonymous on


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 271 Answers

SOURCE: Removing rear bumper cover on 2007 Chevrolet Impala?

Most dents can be popped or tapped back out, provided it has not crumpled or creased the metal.

Posted on Dec 07, 2012


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Removing rear bumper cover for 2007 uplander

Lift the tail gate. There are clips or screws along the top edge. Remove this. The clips all you do is pull the center pin with a panel tool or pliers then the rest will come out. Then you will need to remove the clips holding the rear side of each of the back wheel wells in. Under that will be more clips, screws or bolts that hold the side edges of the bumper cover on.

Aug 19, 2016 | 2007 Chevrolet Uplander

1 Answer

How to remove rear bumper cover on a 2003 chevy impala?

The top and bottom are held in place by plastic plugs. Where the bumper meets the metal, There are two bolts on each side.

Jun 29, 2016 | 2003 Chevrolet Impala

1 Answer

How to replace right front fender on a2007 replace fender 2007 chevy impala

There are four bolts and the hood hinge to remove on top. Remove the tire, remove the inner fender cover( seven or eight screws). There are two bolts to remove the fender from the front bumper cover. And one bolt to remove from inside the door( open the door, remove the cloth, the bolt is close to the top). Replace in reverse.

Oct 09, 2014 | 2007 Chevrolet Impala

1 Answer

Removing rear bumper cover on 2007 Chevrolet Impala?

Most dents can be popped or tapped back out, provided it has not crumpled or creased the metal.

Dec 07, 2012 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

'08 impala SS 25k miles, over speed bumps or dips in road, right rear suspension creaks, rubs, squeaks etc...

I just did one of these in the shop and the problem was the rear sway bar bushings were dry.I removed them and lubed them and the noise went away.One thing you should check is call the dealership and find out you could still be under warranty.The bumper to bumper warranty is 3 years and 36 k miles.I work at a G.M.dealership.If it is not covered then try lubing the bushings.I used Syl Glide.Let me know what you find out or if it took care of the problem.Good luck.

Mar 09, 2011 | 2008 Chevrolet Impala

2 Answers

Need step by step instructions on how to remove a rear bumper cover on a 2007 nissan altima

Rear Bumper: Service and Repair
Removal and Installation
1. Remove the LH and RH rear combination lamps.
2. Remove both the rear wheels and tires.
3. Remove the LH and RH splash shields.
4. Remove the rear bumper fascia clips and screws, then remove the rear bumper fascia.
5. Remove the rear energy absorbing foam.
6. Remove the rear bumper reinforcement.
7. Remove the rear bumper supports.
Installation is in the reverse order of removal.


Nov 12, 2009 | 2007 Nissan Altima 3.5 Sedan

1 Answer

I want to fit a towbar to my ford focus hatch 2008 model. What is involved in removing rear bumper Regards Brian Lamb

Pop the Hatchback open and remove the connectors
from the top of the bumper cover.

Optional Step: Using a Floor Jack, raise both sides
of the car in the back, supporting both sides with
jack stands, and remove the rear wheels.

Using Torx Bits, remove the inner rear wheel well

Get behind the rear wheel well and loosen the bolts
holding the bumper brackets on. They're pretty
difficult to find and remove. Be Patient. Do the
same to the other side.

Remove the rear bumper cover by pulling the cover
outward from the part nearest the wheel on both
sides. Once removed, take off the 2 black mounting
brackets from the bumper cover.

Oct 27, 2009 | 2007 Ford Focus (3 Door) Hatchback

2 Answers

Chevy impala 2005, dog chewed off rear licence plate. Pulled out wires, do I have to take full bumper off to check damage. Blinker and lights seem to be working

See if you can pull the wires out just a little and see if there is any bare wire showing. If you can pull any wire out then more than likely the dog couldnt eather.

Jul 14, 2009 | 2005 Chevrolet Impala

1 Answer

Front bumper cover support

sounds like you need a new front end clip

May 03, 2009 | Chevrolet Impala Cars & Trucks

1 Answer

Replacing the skid plate on 07 Tahoe Z71

Remove bumper or use a swivel adapter to remove

Apr 29, 2009 | 2007 Chevrolet Tahoe

Not finding what you are looking for?
2006 Chevrolet Impala Logo

Related Topics:

295 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides