Question about Ford Escape

Open Question

2009 ford escape code po451 - Escape Ford Cars & Trucks

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

abauto
  • 353 Answers

SOURCE: LOW BEAM LIGHTS ON 2009 FORD ESCAPE VERY POOR.

If the headlights are adjusted properly and it is still too dim to see properly, you can add a set of driving lights. A high quality set from PIAA or other high end lighting manufacturers will cost $200-$300, but it is well worth the investment. You can also swap the headlamp bulbs for a more powerful set, ask the parts store.

If your lights are shining at the ground right in front of the vehicle, I would suspect that they are out of adjustment and you should take the vehicle to a shop that can accurately align them.

Posted on Sep 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2009 ford escape will not start,everything comes on and lights up but it will not start.


If it cranks good, but, won't start, have a helper crank it while you visually check for spark at the spark plugs. If you have spark everywhere, use a gage and check proper fuel pressure. Also, check for fuel injector pulse, while cranking. Can you check for applicable trouble codes? To check trouble codes, yourself, at the least, you need an obd2 code reader.

If it won't even crank, have to check starter motor and starter wiring circuits. Make sure battery has a full charge.

I give guys and gals the same info, I don't know how else to do it?

May 13, 2015 | 2009 Ford Escape XLT

1 Answer

MY 09 ford ESCAPE ONLY STARTS WITH NEW SPARE KEY?


go to 2009 ford escape owners manual and download it for free the sequence for key programming is in there some how yours may be erased itself or the chip is malfunctioning

Feb 21, 2015 | 2009 Ford Escape

2 Answers

How do i know what # fuse control the washer motor on my 2009 ford ecape?


GO TO 2009 FORD ESCAPE OWNERS MANUAL AND DOWNLOAD IT FOR FREE FROM FORD THAN YOU WILL FIND IT AND ALWAYS HAVE THE OWNERS MANUAAL ON YOUR PHONE OR COMPUTER

Feb 14, 2015 | 2009 Ford Escape

1 Answer

Reverse light not working on 2009 ford escape


First check the bulbs. To many times I have replaced bulbs. If bulbs are good then you have to go to the neutral safety switch. It on the drivers side of the transmission. You have power in, because other things work. Check power out. Usually a purple or purple/white wire. No power out. Replace the switch. Personally, I would just live with it.

Aug 20, 2014 | 2009 Ford Escape XLT

1 Answer

Firing order diagrams


you never gave engine size , follow this link , if it's the wrong engine let me know and i'll search for the other
2 5 6 Ford firing order Ricks Free Auto Repair Advice Automotive Repair...

Jun 28, 2014 | 2009 Ford Escape

1 Answer

Code p1633


This code means the pcm has detected a low voltage situation on the memory circuit this is a common problem in fords start by disconnecting the battery then with electrical contact cleaner pull the fuses one at a time from the fuse box under the hood clean the contacts coat with dielectric grease and replace them usually it is caused by corrosion of the contacts in this box however I have run across this where the actual wire for the memory itself has corroded to the point where it needs to be replaced from the fuse all the way to the pcm itself

Apr 12, 2014 | 2009 Ford Escape

1 Answer

2001 ford escape with engine codes p0451 and p1451 just replaced evap selenoid last year


P1451-- EVAP Control System Canister Vent Solenoid Circuit Malfunction

PO451--EVAP System FTP Sensor
fuel tank pressure greater than 14 inches of water

Mar 17, 2011 | Ford Escape Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...