Question about 1994 Mazda MPV

2 Answers

My mazda mpv has trouble starting

WHen we turn the key the car makes like a chocking sound but does not turn on, it takes several times turning the key before it can start

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 5,370 Answers

Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.



From start to end troubleshooting these problems I suggest you to check the help link below and follow its procedure: -----


Click the link below:---


CAR NO START: ENGINE NOT TURNING OVER:
http://alltypesofpartsreplacing.blogspot.com/2012/11/car-no-start-engine-not-turning-over.html


--------
These will help.
Thanks.

Posted on Dec 05, 2012

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mazda Master
  • 21,873 Answers

Not sure what you are describing as the sound, but it could be a faulty starter. Sometimes the brushes in the starter stick and you have to "bump" the starter to get them to make contact.
A mechanic would check for voltage at the starter.

Posted on Dec 05, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1989 MAZDA MPV NO CRANK NO START STARTER TESTS GOOD.


Assuming you've checked the battery for a possible short and both the battery and the starter for loose connections, no click sounds like a faulty starter solonoid, which could work intermittently.

Jan 06, 2012 | 1989 Mazda MPV

2 Answers

The light of check engine turn on in my mazda 3 the trouble is troubleshooting P2404


I check for engine codes at:
http://www.obd-codes.com/trouble_codes/
I couldn't find that code in the standard code list or the Mazda unique code list.

Apr 04, 2011 | 2006 Mazda MPV

3 Answers

2002 mazda mpv, key stuck in ingition and it is in park , but the key wont turn all the way to lock, it will only go as far as acc?


Mazda MPV have problems with failing gear shift change assembly ( includes park sensor micro switch)

Pull the fuse for the hazard lights ( 10amp) - if the key comes out, then the switch is defective.

Fix the problem by installing a new change lever assembly - part number for 2000 and 2001 MPV's is LC62-46-10XE with MSRP of $246.90. 2002-2004 would be a LD47-46-10XB with MSRP of $250.40.

May 23, 2010 | 2000 Mazda MPV

1 Answer

96 mazda mpv minivan 165k mi. Ran fine until one day just died.Had towed home.3 mech.tried diagnose gave up wouldn't start-turns over-no start. Last mech.replaced timing belt&idle pulley. Still no...


I was browsing unsolved problems. If you still have the problem, I'll try to help you. But it's going to be awhile trying to communicate back and forth. First...Check the engine for spark. Take off a plug wire and stick a screw driver in the wire end and place the metal part of the screw driver next to something on the van that's metal. Have someone crank it over for just a second or two and see if a small spark jumps from the screw driver to the metal part. I'll check back for your answer.

Mar 05, 2010 | 1996 Mazda MPV

1 Answer

96 mazda mpv minivan 165k mi. Ran fine until one day just died.Had towed home.3 mech.tried diagnose gave up wouldn't start-turns over-no start. Last mech.replaced timing belt&idle pulley. Still no...


step on fuel pedal to the floor, turn it over if it starts sumthing in fuel line, can you hear your feul pump when you turn the key???? is your distributor cap ok, all the wires ok hooked up, mite fuel pump relay, or just a fuse under dash under hood..

Jan 31, 2010 | 1996 Mazda MPV

1 Answer

Mazda 2000 mpv does not start


Couple of things it could be.

Try turning it over without touching the gas pedal. Sounds like you flooded it.

Check the coil and engine management sytem. Its probably that.

Nov 04, 2009 | 2000 Mazda MPV

2 Answers

Starter clicks but does not turn over


typically, this is indicative of a worn out starter. inside the starter there is a coil that pushes the drive gear into the flywheel (this is what makes the click) and then there is a motor that turns the drive gear. The armature bushings of the motor are likely worn, and having difficulty making continuity. (sometimes lightly tapping the back end of the starter with a hammer will get it to work). ultimately, the starter has to be replaced. best of luck

May 14, 2009 | 2001 Mazda MPV

3 Answers

Program remote control for mazda mpv 2002


Courtesy of: forums.mazdaworld.org

Try this, it works on several 2002 models:


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the drivers door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the drivers door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done

Dec 06, 2008 | 2000 Mazda MPV

Not finding what you are looking for?
1994 Mazda MPV Logo

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...