Question about 2003 Dodge Durango

1 Answer

Can I just replace the serpentine belt for power window on 2003 dodge durango

The motor works on the driver side window but the belt comes off. Can I just replace the serpentine belt without replacing both motor and the belt?

Posted by on

Ad

1 Answer

Your very confused

The door window & the engines serpentine belt
& whatever motor your taking about-- are two
separate things

Start over

Posted on Dec 05, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 85 Answers

SOURCE: 1999 dodge durango fan motor replacement

  1. Remove right side scuff plate.
  2. Pull back carpet.
  3. Disconnect blower motor wiring connector.
  4. Remove blower motor retaining screws, and lower blower motor assembly from unit housing.

Posted on Jul 03, 2008

RudolfDiesel
  • 100 Answers

SOURCE: replace serpentine belt on 2004 dodge caravan

Hello
Here is a link for belt replacement
RD
http://www.autozone.com/addVehicleId,2945902/initialAction,repairGuide/shopping/repairGuide.htm?pageId=0900c152800b639e

Posted on Jan 15, 2009

  • 145 Answers

SOURCE: 1999 Dodge Durango driver side window does not roll up nor down.

Remove the door panel and find the window motor Unplug it and using a separate car battery run cables directly to the window motor When you switch the polarity the motor will either bring the window up or down or if noting happened change the window motor and window regulator assembly.

Posted on Jun 08, 2009

localwonder
  • 6784 Answers

SOURCE: diagram for a serpentine belt replacement for 2000 avenger dodge

HI. i have posted the diagram requested below.

7109f62.jpg

Posted on Aug 24, 2009

Testimonial: "This was exactly what we needed, Thank you so very much. "

  • 3 Answers

SOURCE: replacing serpentine belt 2002 dodge stratus

Did this on my 2002 Stratus 2.4L. I agree with other poster, you do have to remove the passenger tire and wheel wall to do it, but the tensioner travels clockwise.
Note: I offer this solely as a description of how I accomplished the task on my vehicle. It should not be taken as me advising anyone else in any way on how or whether they manage to repair their own vehicles.

1) Engaged parking brake, loosened lugs on passenger front tire.
2) Jacked-up and placed jack-stand.
3) Removed piece of black under-carriage which surrounds the oil filter and attaches to front bumper. There are at least 10 plastic push-pins to remove and I managed to destroy half of them in the process.
4) Positoned belt over lower pulleys and tensioner (as best as possible) then used a bungee to hold the top end of belt up while I worked under the car.
5) Used a 3/8 ratchet and inserted into square hole attached to the tensioner, disengaged the tensioner (moves clockwise) then used a brace to keep the ratchet handle in that position.
6) From top, removed bungee and finished placing belt over alternator, checked the position of entire belt, reengaged the tensioner, and replaced wall and wheel.

Posted on Sep 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my 2003 dodge durango drivers side window, i put it down then went to put it back up and heard something inside door, window won't go up. motor still working, took door apart theres a spring thats...


Your window regulator is broken. You are not going to fix it or put the "spring" back on. You will need to replace the entire window regulator. (There will be lots more room for your hands this way too!) The regulator assembly looks like the picture below. It is available at AutoZone, Oreilly"s, Napa, Carquest, and several other parts retailers It will cost you about $90 (U.S.) give or take a few depending on where you live.


dttech_28.jpg

Jun 04, 2011 | 2003 Dodge Durango

1 Answer

Rear door on left drivers window drop in track cable is the cable just of or should i replace motor 2003 dodge durango


you will have to remove door panel and check. most likely the cable broke and you will need to replace motor mechanism

Apr 18, 2011 | 2003 Dodge Durango

1 Answer

2003 dodge durango windows, headlights, 4x4 wont work


please email me answer as soon as possible to chillinonli@optonline.com thankyou

Jul 23, 2010 | 2003 Dodge Durango

1 Answer

The window on the driver's side will not go up or down and will not stay up.


Need to check power to switch - then to window motor -- to do this you have to remove drivers door panel and use and test light with the ignition switch in the on postion. With test light connected to window motor, press switch up or down , if light comes on and motor does not - replace motor - if no power at motor replace switch..

Dec 02, 2009 | 2002 Dodge Durango

2 Answers

2000 dodge durango driver side window problem


I have had to replace three of the four window power regulators in my 2000 Durango. They just seem to stop working within a year or two of each other.

Aug 02, 2009 | 1999 Dodge Durango

1 Answer

2003 dodge durango driver window (power) fell down


sounds like its come out of alignment from the channel or the motor has failed remove door trim to find out

Jul 17, 2009 | 2003 Dodge Durango

3 Answers

1999 Dodge Durango driver side window does not roll up nor down.


Remove the door panel and find the window motor Unplug it and using a separate car battery run cables directly to the window motor When you switch the polarity the motor will either bring the window up or down or if noting happened change the window motor and window regulator assembly.

Jun 08, 2009 | 1999 Dodge Durango

1 Answer

Power windows don't work


My RR failed to work. I removed the panel and some parts, disconnected the wiring harness from the motor then noticed the replacement I purchased was not correct. When I plugged the harness back up it worked!
Lee

May 14, 2009 | 2001 Dodge Durango

1 Answer

2003 Dodge durango sport all four power windows not working


I know its not what anyone would want to here but sounds like a short. Best thing to do is first wiggle your key switch when the vehicle in in the on position then at the same time try to check to see if locks or windows are working. Then do the same in while the rig is running. If that dont work your ignition is fine and you need to take off door panels and check and wiggle all conections on window motors and lock motors and look for melted or burt wire or some that might have got hot. If all is good there you need to go to the back of the fuse box were the fuses to those items plug in and check there. As far as the service engine light goes either take it to the nearest Schucks or AutoZone and they will check it for free if not cycle the key on and off 3 times and on the 3rd time leave it in the on position look at your odometer light and it will flash a code remember that code and type Dodge then the code on yahoo search and it should tell you why your light is on Hintz whay sensor is bad. Hope this helps.

Mar 07, 2009 | 2003 Dodge Durango

Not finding what you are looking for?
2003 Dodge Durango Logo

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...