Question about Cars & Trucks

1 Answer

My 1999 mercedes ml 320 was hit very hard while backed into a parking stall, body damage was repaired but it still has other damages, it has a lift kit and it now starts veering too much to the right

The truck doesn't drive the same after the accident need to know what happened?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Filmmaker:

    Uploaded 5 video answers.

  • Expert
  • 141 Answers

I think the rear axle is out of alignment a simple thrust angle alignment should cure the problem . provided the wheels and tires are not out of round and the front angle alignment is correct another possibility is radial tire pull and may not be related at all if you swap the front tires and the pull switches side you know you have a slipped cord inside the tire and they cannot be seen usually but will drive an alignment tech batty

Posted on Dec 05, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

jasperoni
  • 203 Answers

SOURCE: I have a 1998 Mercedes

First you need to see if the remote central locking is working. It sounds like your transponder(key) is un synchronized. Even if the central locking is working there is a d.a.s.(driver authorization problem). Try your other key if you have one. There is a way to resynch the key w/o a factory scan tool but you have to follow the directions exactly and be quick. Point key at door receptor.( grab handle area) Hold the lock button down and press the unlock button 5 times in 10 seconds while holding down the lock button. hold the lock button down the entire 10 seconds even if you've hit the button 5 times. after the 10 seconds is up release and hit the lock button again. The d.a.s. system shuts off your fuel pump when their is an authorization error. It is a common problem in 98 and 99 ml's. Your owner's manual tells you how to resynch the key if my description is difficult to follow. Hopefully I have been helpful

Posted on May 29, 2009

  • 1 Answer

SOURCE: my 1998 mercedes ml320 starts for 1or 2 seconds and then stalls.

You either have to replace the battery in your key fob or have it reprogrammed. Verify this by trying the second key, if you have it. AAA told me that you can reprogram it by leaving it in the ignition, with the key turned to the first position, overnight. I haven't tried it.

Posted on Apr 25, 2010

  • 1857 Answers

SOURCE: Need the wiring diagram to

mitchell1diydotcom has the wiring diagrams, They are copy protected so you will need to go to the site and pay 12 bucks to get everything you ever wanted to know about your car.

Posted on Aug 16, 2010

pchambley
  • 334 Answers

SOURCE: 1997 f150 xl had front

Your not getting power to the s terminal on the starter..Usually the computer grounds a relay and sends the power from the switch to the starter...I would check see if you have a bad relay..Then check the wire from the starter and work backwards,,to the switch

Posted on Sep 19, 2011

SOURCE: I've 2000 Mercedes Benz ML 320.One night I backed up & parked in the Garage the next morning it won't go forward. I noticed the that REAR WHEEL on passenger side was locked up. What's

The only suggestion is to place the vehicle on
stands & remove the wheel to check out the issue

To speculate from the internet-- is just that.

To have something happen while you sleep
is odd,so I would be inclined to go with something
like an electronic parking brake issue,if that applies

Posted on Nov 14, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the stamped chassis number for ML320 cdi 2001 model?


Try this site, Good Luck.http://www.mercedesmlclub.com/vin_plate.html

Aug 05, 2016 | 2001 Mercedes-Benz ML 320

1 Answer

Ml 320 automatic is moving but soon after apling gear is cut power off


Have a diagnostic check done. Check codes, wires, and valve body. Just a start.

Jan 01, 2015 | 2001 Mercedes-Benz ML 320

1 Answer

I've 2000 Mercedes Benz ML 320.One night I backed up & parked in the Garage the next morning it won't go forward. I noticed the that REAR WHEEL on passenger side was locked up. What's


The only suggestion is to place the vehicle on
stands & remove the wheel to check out the issue

To speculate from the internet-- is just that.

To have something happen while you sleep
is odd,so I would be inclined to go with something
like an electronic parking brake issue,if that applies

Nov 14, 2012 | 2004 Kia Sedona

1 Answer

My 1999 ml 320 steering wheel spins all they way around 360 degrees and it makes a straining noises when it turns. and it's very loose. help


Check your power steering fluid. Screeching will come from the fluid being too low and would affect the steering. It will also burn out the pump if you don't keep it full.

Oct 05, 2012 | 2001 Mercedes-Benz ML 320

1 Answer

Repleace ac compresor for ml 320 99 year


evacuate the system,remove a/c lines from compressor,remove belt,then 3 bolts,2on the body of compressor and one on the back. thats simple.

Jun 27, 2012 | 2001 Mercedes-Benz M-Class

1 Answer

Fan noise in dashboard of 2002 ML 320 Mercedes


something may have fallen into it from the defroster vents - it will have to be disassembled.
fan may need to be replaced if damaged.

Mar 25, 2011 | 2007 Mercedes-Benz ML320 CDI

1 Answer

My ml 320 does not start. the battery is new


Crankshaft position sensor maybe at fault when it fails i will stall the engine and/or not let the engine start and will not throw a code. Beyond that and no other explanation also replace the coil packs as no one rarely does and they may be bad.

Apr 18, 2010 | Mercedes-Benz ML320 Cars & Trucks

1 Answer

Ml 320 keeps cutting out?


Sounds like a problem with your crankshaft position sensor.

Mar 16, 2010 | 1999 Mercedes-Benz M-Class

1 Answer

Please i need a radio code for mercedes benz ml 320


to get the radio code you need to get the serial number from the back of your radio unit,,call your local dealer, give them the number and they will give you your radio code

Jul 01, 2009 | 1999 Mercedes-Benz M-Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...