Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: radio in 05 Malibu Maxx LS
The reason the radio is staying on is the retained accessory power not shutting down when the driver's door is opened. You can verify this by opening the door with the key on, if the door ajar light on the instrument panel does not light up the switch in the door latch is defective. You will need to replace the door latch.
Posted on Aug 20, 2008
The torque converter clutch circuit may be at fault. The best way to determine the problem is to have a scanner/computer to read check engine codes.
Posted on May 06, 2009
Dealing with same issue, also when in main automatic mode, intermittenly seems to "get lost" while coasting and then reaccelerating. What I've found out so far it seems the data cable to the transmission is the problem, thin wires, tight fit and break in wire causes effect. Working on sourcing a new cable. Dealer thought transmission module (500.00 usd). Going cable route first due to cost and common sense.
Posted on Jun 11, 2009
Going through the same thing with mine since I bought it brand new w/ 27 miles and thats not thousand. Any answers would be huge to help out my good ol' mrgoodwrenches who have no idea what is going on. So far all of the above have been done including the tranny check and fluidchange and pressure flush, the airflow sensors, the electronic throttlebody unit, the left and right O2 sensors, and now the electronic fuel injectors. Light is still coming on.
Posted on Mar 16, 2010
A Ball Joint Can Usually Be Replaced Without Removing The Control Arm From The Vehicle. Place The Vehicle On Jack Stands. Remove The Shock Absorber And Install A Spring Compressor on The Coil Spring.Remove The Nut Securing The Ball Joint To The steering Knuckle And Separate The Knuckle And Then Joint. The Ball Joint Should Be Pressed,Riveted,Bolted,Or Screwed Into The Control Arm.A Service Manual Will Give The Details For The Specific Make And Model Vehicle.
Posted on Apr 09, 2010
Tips for a great answer:
Mar 23, 2016 | 2005 Chevrolet Malibu Maxx
Feb 10, 2015 | 2005 Chevrolet Malibu
Sep 14, 2011 | 2005 Chevrolet Malibu Maxx
Jun 15, 2011 | 2005 Chevrolet Malibu Maxx
Oct 08, 2017 | 2005 Chevrolet Malibu Maxx
Jan 09, 2010 | 2005 Chevrolet Malibu Maxx
Dec 26, 2009 | 2005 Chevrolet Malibu Maxx
Sep 27, 2009 | 2005 Chevrolet Malibu Maxx
May 15, 2009 | 2006 Chevrolet Malibu Maxx
Apr 13, 2009 | 2005 Chevrolet Malibu Maxx
35 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: