Question about 2003 Chevrolet Silverado 1500

Open Question

How to replace the seat belts in 2003 silverado

The air bags was deployed and i was told to replace both seat belts but dont know how

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 56 Answers

SOURCE: malibu air bag module location

The module is under the passenger side seat,under the carpet.You will have to remove the seat to access it easier.Lift up the carpet and it will be mounted to the floor.

Posted on Mar 03, 2009

  • 71 Answers

SOURCE: chevy silverado 2006 lights "service air bag"

First of all you need to get this problem fixed ASAP. While the airbag light is illuminated, your SDM (Sensing and Diagnostic Module aka: the brain of your airbag system) shuts of power to the airbags. In which, if you are in an accident your airbags will not deploy while this light is illuminated. You need to take your vehicle to a GM dealership. A Tech 2 scantool is needed to retrieve the code from the SDM. Hopefully it won't be a costly repair, but is something that defineatly needs to be corrected soon. Good luck and hope all works well.

Posted on Jul 04, 2009

Testimonial: "very fast and helpful, thanks"

  • 1 Answer

SOURCE: air bag light

i had the same thing happen on my 04 after looking at everything it ended up the seat from moving it back and forth cut two wire

Posted on Jul 23, 2009

Testimonial: "bingo...thanks for the help"

  • 11 Answers

SOURCE: Disabling seat belt chime in a 2007 Silverado

Unfortunately if you take this to a shop they can get into alot of trouble doing this for you. Some are controlled by the body control module and others are just simple circuits. Look at you seat belt female end and look for a harness that goes to it. If it's just 2 wires connect those two wires together to trick the system! You should always wear your seatbelt by the way.

Posted on Sep 03, 2009

  • 14036 Answers

SOURCE: AIR BAG LIGHT B0015 AND BOO22 REPLACED SEAT BELTS

AIR BAGS A DEALERSHIP FIX THEY HAVE PROPER EQUIPMENT TO TROUBLESHOOT AND FIX THEM.IF YOU ATTEMPT TO FIX YOU COULD CAUSE ACCIDENTAL DEPLOYMENT.

Posted on May 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove seat belts in 2013 silverado


If you remove the seat belts you will not have air bag deployment in an accident.

May 18, 2014 | Cars & Trucks

1 Answer

Seatbelts locked after minor collision


Your seat belts are tied in to your air bag system. Even though your air bags may not have deployed, your seat belt(s) have deployed a one-time use trigger designed to cinch you tightly into your seat in the collision you were in. There is no way to reset them, they will need to be replaced. A used, functioning seatbelt will work, but usually must be of the same year as your car, even if other years appear identical. The wrong year will appear to the on board computer as an error, and will not allow the system to be restored to functional (air bag light will not go off), even though now your seat belt will appear to function. If your air bag light stays on after the bulb-check sequence at startup, it means the system is disabled...the air bag will not function in a crash.

Feb 07, 2014 | 2005 Chevrolet Malibu

1 Answer

The air bag light on my 1999 Jeep Grand Cherokee comes on and off without reason. I was told by a machanic to get a "blow up belt / seat belt for the driver's side". He said this belt was only...


Not likely that the air bag will deploy without notice, its supposed to be a safety device not a hazard.
the light can mean the air bag(or belt) it may not work, or it is due for servicing, this can sometimes be when they get to 10 years old, if your model has the blow up belt it may mean the belt is out of date, pehaps the mechanic was correct.
You will need a specialist air bag tech, who will check or replace necessary items and restet the warning light.

Apr 03, 2011 | Jeep Grand Cherokee Cars & Trucks

1 Answer

2003 Tiburon front seat belts that are connected to Air Bag system. Can those be substituted for regular retractable seat belts we replacing due to air bags and brakes deploying? OR do you have to replace...


you must replace seatbelts of the same type as they work in conjunction with the airbag sensors.just before the airbags go off the seatbelts retract(milleseconds)to pull any slack tight,and you back into the seat,

Apr 21, 2010 | 2003 Hyundai Tiburon

1 Answer

I have a 2001 ford escape that was in a fender bender. minor visual damage but both airbags deployed. I bought new steering wheel and passanger airbag and hooked up. I was told i now need new sensors which...


this may sound crazy but this is what they say (manufactor) when ever airbags are deployed ,the following must be replaced,the deployed bags. the airbag module,crash sensors,clock spring, the belt buckles and seat belts should be inspected and checked.

Mar 08, 2010 | 2001 Ford F150 Styleside SuperCrew

2 Answers

I HAVE A 2003 TOYOTA COROLLA WITH AIRBAG CODE B0133 SHORT IN P/T SQUIB RH CIRCUIT (B+). DOES ANY ONE KNOW WHAT USUALLY IS THE PROBLEM WITH THIS FAULT? OR WHAT I NEED TO CHECK.


You have a problem with the pass seat belt or the wiring to it.P/T stands for pretensioner. when the air bag deploys the seat belts tighten.
Be carful with the seat belt it contains an explosive.

Sep 17, 2009 | 2003 Toyota Corolla

2 Answers

My 2003 ford expo has a constant airbag light lit after starting the veh. I have a new sensor, can't figure out were 2put it.. Please help.


first, you need to read the Lamp Fault Code, LFC from the flashing light. Here's how:

Lamp Fault Codes
When the restraints control module (RCM) detects a system fault, it will cause the air bag indicator to flash a coded sequence: a lamp fault code (LFC). The code is two digits. The first digit is flashed with a 0.5 second interval between pulses. There is a 2 second pause before the second digit is flashed, which also has a 0.5 second interval between pulses. There is a 5 second pause between each display of an LFC.
Each LFC is flashed five times after which the air bag indictor will remain lit for the remainder of the key-on cycle. If there are multiple LFCs, each LFC will flash in order of priority.
-------------------------------------------------------
The fault could be in the air bag circuits, the canopy circuits, the pretensioner circuit on the seat belts, etc.
Report back with code.

here's some of system.

SECTION 501-20B: Supplemental Restraint System 2003 Expedition/Navigator Workshop Manual
DESCRIPTION AND OPERATION Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) The air bag supplemental restraint system (SRS) is designed to provide increased collision protection for front seat and second row outboard occupants in addition to that provided by the three-point safety belt system. Safety belt use is necessary to obtain the best occupant protection and to receive the full advantage of the SRS.
This vehicle line contains dual stage deployment (advanced restraint system) driver and front passenger air bag modules. These vehicles can also be equipped with optional safety canopies that deploy from the A-pillar to the C-pillar upon a side impact or if a rollover condition is detected. If equipped with safety canopies, a unique restraints control module (RCM) is used.
See the following illustration for deployable component location.
Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) Deployable Components a55c8c5.gif Item Part Number Description 1 611D10 Passenger air bag module 2 042D94 Passenger side safety canopy module 3 042D95 Driver side safety canopy module 4 61203 Driver safety belt buckle and pretensioner 5 043B13 Driver air bag module 6 14A664 Clockspring 7 61202 Passenger safety belt buckle and pretensioner

4ee7996.gif
Item Part Number Description 1 14B321 Restraints control module (RCM) 2 14B345 Second row, C-pillar side impact sensor 3 14B345 Second row, C-pillar side impact sensor 4 14B416 Driver seat track position sensor 5 14B345 Front row, driver door, side impact sensor 6 14B006 Front impact severity sensor 7 14B345 Front row, passenger door, side impact sensor

Apr 23, 2009 | 1997 Ford Expedition

1 Answer

2001 corolla air bag replacement ,


If you are replacing the air bags, you should replace the front left and right crash sensors, the spiral cable under the steering wheel, AND the center air bag sensor, which is in front of the console. If your car has seat-belt pretensioners and force limiters, you may have to replace them also. You will know this if the seat belts are "locked up". If you do not replace all of the parts, you may get a air-bag code, and the air bags may not deploy next time.

Feb 09, 2009 | 2001 Toyota Corolla

1 Answer

Airbag light is on - 2003 Tiburon


section_closed.gif 2003 HYUNDAI TIBURON Recall ID from NHTSA: 02V290000 Auto Recall Date: NOV 05, 2002 Vehicle Component: SEAT BELTS:FRONT:BUCKLE ASSEMBLY Model Affected TIBURON Estimated Vehicles Affected: 7382 Recall Details Auto Recall Date: NOV 05, 2002

Vehicle Component: SEAT BELTS:FRONT:BUCKLE ASSEMBLY Estimated Vehicles Affected: 7382 Model Affected2003 HYUNDAI TIBURON

2003 Hyundai Tiburon Defect Summary:ON CERTAIN PASSENGER VEHICLES, THE DRIVER SEAT BELT BUCKLE WIRING COULD BE DAMAGED BY INTERFERENCE WITH THE DRIVER SEAT CUSHION HEIGHT ADJUSTER MECHANISM.

Defect Consequence:DAMAGED DRIVER SEAT BELT BUCKLE WIRING COULD CAUSE THE SEAT BELT WARNING LAMP OR THE SUPPLEMENTAL RESTRAINT SYSTEM (SRS) AIR BAG WIRING LAMP TO ILLUMINATE. IT COULD ALSO CAUSE THE AIR BAG FUSE (CAVITY NUMBER 5) TO OPEN, PREVENTING AIR BAG DEPLOYMENT. NONDEPLOYMENT OF AN SRS AIR BAG IN A CRASH WHERE AIR BAG DEPLOYMENT IS WARRANTED COULD INCREASE THE RISK OR SEVERITY OF INJURY IN A CRASH.

Remedy:DEALERS WILL INSTALL A NEW DRIVER SEAT BELT BUCKLE, IF NECESSARY, AND WILL PLACE A PROTECTIVE COVER OVER THE DRIVER SEAT BELT BUCKLE WIRING TO PREVENT DAMAGE FROM OCCURRING. OWNER NOTIFICATION BEGAN ON MARCH 24, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HYUNDAI AT 1-800-633-5151.

Estimated Vehicles Affected: 7382

Notes: HYUNDAI MOTOR COMPANY 056

Dec 07, 2008 | 2003 Hyundai Tiburon

2 Answers

Srs light is on.


SRS stands for "supplementary restraint system" which can be either automatic seat belts or air bags. I'm gonna go with air bags on your car. The reason the light is on is due to the fact that the air bag computer has sensed a problem with a component in the system. I would strongly recommend that you take it to a dealer for a scan, inasmuch as the air bags may fail to deploy on impact if there is a problem in the system.

Jul 15, 2008 | 2003 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...