- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
dear friend-the code P1529 means transmission control module(TCM)-communication problem,so please look at the following items-wiring,tcm,ecm,
just a hint if the transmission is slipping then the tcm is getting the wrong information from the input and out sensors.
P0734 - 4th gear incorrect ratio. P1529 Malfunction Indicator Lamp Request. Problem is in the transmission.
Take/Tow your vehicle to an authorized Hyundai dealership and pay the diagnostic fee... they will tell you exactly what the problem is and the cost of parts/labor to fix it... at least this way you'll know what the problem is and what's required to fix it.
I am sorry the above codes is general error code , the error your
getting is car specific hence the codes where not there in the list:
Input speed sensor system
If no output pulse is detected from the input shaft speed (PG-A) sensor
for 1 second or more while driving in 3rd or 4th gear at a speed of 30
km/h or more, it is judged to be an open or short circuit . In the
input shaft speed sensor and diagnosis code P0715 is output. If
diagnosis code P0715 is output four times, the transmission is locked
into 3rd gear (D range) or 2nd gear as a fail-safe measure
TCM MIL request signal, this code sets in the computer engine control module when there is a transmission fault code