Question about 2001 BMW 325
OR CALL A TOW COMPANY SO THEY CAN OPEN DOOR FOR YOU TOW COMPANYS DO THAT ITS ABOUT $60 BUCKS THEN TAKE IT TO LOCK SMITH SO THEY CAN MAKE KEY FOR YOU BE LOT CHEAPER THAT WAY OK
Posted on Dec 05, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Central Locking does not work
You must reset your remote control in order for the lock/unlock to work properly.
To reset remote you would:
1)Insert Key in Ignition Turn to Position 1(Don't Start the Engine) for about 5 seconds
2)Turn Key Off and HOLD the LOCK button on Remote while pressing the UNLOCK 3 TIMES
3)Release both lock and unlock buttons you are holding
4)All doors should automatically unlock
And exit the door and lock with the Remote.
Posted on Sep 22, 2009
if it wont turn fully to open, theres a little spring loaded pin in a u shape in front of the barrel that breaks this needs to be replaced,
Posted on Nov 28, 2009
SOURCE: CENTRAL LOCKING NOT WORKING
central door locking need further information, but to petrol in is very simple: in the right hand side of your boot straight behind the fuel door you find a cable, if you pull it it will release the door
Posted on Apr 11, 2010
Providing central locking works when you insert key in lock,try programming keys
Enter car make sure all doors/windows are shut
Switch ignition on and off,remove key
PRESS AND HOLD UNLOCK BUTTON ON KEY
Press lock button on key 3 times whithin 10 seconds and release unlock
Central locking will lock/unlock rapidly to confirm reset
If your key is the type with bmw logo in the middle battery replacement is not possible,as it charges as you drive
Posted on Jun 21, 2010
there is a motor placed inside the doors for the operation of the central lockin system. when you open the door by key this motos is activated and all door locks are released. your problem may because of this motor is failed.
cause of the failure
1.the wire going to the motor may be chopped off.
2.the junction box connecting the wires may be damaged.
3.fuse may be blown out.
4.motor itsef damaged.
so please check weather power is coming to the motor using multi meter. if the power is not coming to it then the problem is with the wires. if the power is coming to it then problem is with the motor.
i suggest you to take to BMW because you need to remove the door pannel its better if they do it.
please vote me if my answer was useful to you.
Posted on Jul 12, 2010
Tips for a great answer:
Jan 08, 2016 | Nissan Cars & Trucks
Feb 24, 2010 | 2000 Porsche Boxster
Aug 10, 2009 | Renault Sport Cars & Trucks
Jan 24, 2009 | 1990 Jaguar XJ6
Dec 25, 2008 | 2005 Peugeot 405
Dec 13, 2008 | 2006 Pontiac GTO
Sep 29, 2008 | 2002 Volkswagen Golf
60 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: