Question about 2005 Hyundai Matrix 1.6

Open Question

Hyundai matrix 1.6 twin cam timing chain mark

Looking twin cam engine timing mark

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ghost45
  • 1280 Answers

SOURCE: i need the over head cam chain timing marks so i

The Accent does not incorporate a 'chain' -- it used a Timing Belt.

Posted on Nov 04, 2009

linktriscuit
  • 89 Answers

SOURCE: hyundai excel twin cam manual clutch repair

If you don't have the service manual specifically for the vehicle and the proper tools to do the task, i'd suggest taking it to the shop instead. It wouldn't be worth all the trouble. But in case your in need of a service manual, may i suggest going to ebay and checking to see if someone is selling the manual on cd for 99 cents. It may sound like a scam or something because service manuals on cd at the dealer average $150-$200. But if one is offering the manual for 99 cents, buy it. It's actually like a copy of the one they sell at the dealership, so before you start on that difficult task, i advise in purchasing a service manual. If they don't have it on ebay, go to your local auto parts store and buy one for $25. The name would be either Haynes or Chilton. Good luck.

Posted on Mar 12, 2010

  • 510 Answers

SOURCE: Timing marks setting Hyundai Lantra

Installation
Ensure timing marks aligned [6] & [7] . 1. Fit timing belt in anti-clockwise direction, starting at crankshaft sprocket. Ensure belt is taut between sprockets. 2. Slacken tensioner pulley bolt [8] . Push tensioner pulley firmly against timing belt to tension belt. 3. Tighten tensioner pulley bolt [8] . Tightening torque: 43-55 Nm. 4. Except Matrix: Turn crankshaft one turn clockwise. 5. Matrix: Turn crankshaft two turns clockwise. 6. Ensure timing marks aligned [6] . 7. Apply a load of 2 kg to belt at . Belt should deflect 4-6 mm. If not: Adjust position of tensioner pulley. 8. Install components in reverse order of removal. 9. Tighten crankshaft pulley bolt [2] . Tightening torque: 170-180 Nm

7 is timing mark on cam,pin mark to top,hole in spoke below pin mark lines up with mark on head
6 is crank timing mark,pin mark on crank lines up with mark on block
NOTE this mark is just before top


Posted on Mar 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install timing chain with timing marks both crankshaft and camshaft


Hellen, For the second time, Re POST year, make, model, engine size and complete question so we, here at fixya can answer your question effectively.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Still pulling hair Twin Cam timing marks How accurate Engine Exhaust...
16v fast tbelt swap
Twin cam 16 valve timing marks Google Search

Aug 11, 2016 | Cars & Trucks

1 Answer

Timing marks on cam for timing chain 2007 Hyundai accent


right it a twin cam engine
the cam chain between the two cams
depends what cams are there
do these help

c848a2c4-69e8-4591-aab0-82d2fe2017f6.jpg26198503-log1nphqw4nlzn44ynu5rx0s-1-2.jpg

May 18, 2016 | 2007 Hyundai Accent 1.6

1 Answer

How to set a timing belt on the 2 sprockets of the twin cam Honda ballade 180i engine of 1995 model? And how to position the cam lobes on the valves?


your honda sprocket have 1 slot in of the gear.if you c that.you have facing that two slots.and u look the plastic cover theres arrow or you see your head level your slot or timing mark.you dont problem crankshaft bcoz they have timing mark.

Aug 19, 2015 | Honda Cars & Trucks

1 Answer

I need a photo of timing marks for a 1992 pontiac twin cam engine


The best place to look for this item is in the library. The reference section has the Chilton guides, find the one for your year make, model and engine. It should show pictures andgive complete instructions for any repair

Oct 17, 2014 | Cars & Trucks

1 Answer

How to fit suburu liberty timing belt? Car is suburu liberty 94 2.2l ej20. I had to replace water pump. Can someone tell me where the timing marks are please?


Sorry i do not know off hand where the marks are but i will explain how to do it without marks ,firstly a few spots of white paint before you start makes sanse ,anyway start by slackening the camshaft retaining caps so the all the valves are closed ,take out no1 spark plug and using a nice long thing screwdriver in the plug hole locate TDC ,then look on the flywheel or the front pulley for some timing marks ,now a good clue here is that most engine have the crankshaft keyway pointing to the top of the engine --most but not all --- then move the crank back about 20? so pistons drop a bit but make sure you mark crank before dropping it back though .then look on the cam or cams if a twin cam ,and now tighten cam caps again then turn over cams till no1 cylinder has the valves closed on both inlet and exhaust with exhaust just about to open and inlet has just closed .then bring piston up to mark and fit belt --away you go brmmm brmmmm .simple isnt it .when you get the cam right look for a slot on the back of the cam or a sensor on cam lobe aligning up as this will no doubt be your timing mark ,when found white dab of paint for next time

Nov 29, 2010 | 1996 Subaru Legacy

1 Answer

I have a 1999 chrysler 2.7 twin cam,timing belt off,resetting the timing,which way i point the timing marks?


take the rocker cover off and look at the cams for the timing marks ,might be a falt on the back of the cam that has to be level with the head ,also turn engine over by hand before trying to start,remove no1 plug and make sure piston is at the top

Apr 11, 2010 | 1999 Chrysler Sebring

2 Answers

Looking for cambelt timing marks/ positions please, Twin cam engine Thanks Kevin


these bend valves if belt breaks while running
Align the timing marks on the camshaft gears to the notches on the camshaft cover, using the intake gear mark for the intake gear and the exhaust gear mark for the exhaust gear.
Align the mark on the crankshaft gear with the
notch at the bottom of the rear timing belt cover.

May 12, 2009 | 1999 Daewoo Nubira

1 Answer

2.0 L Timing Belt Marks


hi if its a twin cam ford engine you wont find marks on the cam pulleys.what you have to do is take off the cam cover and look at the back of the cams you will see slots in them ,what you have to do is you can buy the timing kit for the engine at the main dealers or you can make you own using a flat piece of metal 5mm thick and100 mm long this fits into the two slots at the rear of the cams to lick them in place and th crankshaft pulley mark should be in line also.best of luck.

Sep 30, 2008 | 1999 Ford Escort

Not finding what you are looking for?
2005 Hyundai Matrix 1.6 Logo

Related Topics:

544 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75824 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...