Question about 2005 Scion tC

2 Answers

E brake light on 2005 scion tc will not go off

Posted by on

  • Anonymous May 12, 2009

    this is an indicator that you're brakes may need to have new pads installed. had same problem and replaced pads and light went out

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 101 Answers

The same light will come on when your brake fluid level is low in your master cylinder. If its low, just add brake fluid. Then check you front brake pads. The may need replacing soon. (thats why the fluid is low)

Posted on Apr 12, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 51 Answers

Below the brake lever is a switch. you might have to take console out to clean the contacts of the switch but it is not making a circuit. you will know it when you see it. it should have a little spring on it. just clean with electrical contact cleaner or fine grit sandpaper. just scuff it up a little and should cureyour problem.

Posted on Jan 12, 2009

6 Suggested Answers

  • 140 Answers

SOURCE: How do I reset the check engine light for a 2006 scion tc?

YOU CAN GO TO ANY ADVANDED AUTO PARTS AND THEY CAN HOOK UP A OBD2 SCANNER, WE THEY DO ASK THEM TO RESET THE LIGHT FOR YOU.. THIS IS A FREE SERVICE TO THE PUBLIC..GOOD LUCK KEITH..

Posted on Mar 14, 2009

  • 1 Answer

SOURCE: How to remove front stabilizer bar in '05 Scion TC

I don't know if you can get the bushings out without changing the bar or not, but changing the bar is a big job for a DIY. I was thinking about it but will probably have a pro do it for me. From the shop manual: 1. PLACE FRONT WHEEL FACING STRAIGHT AHEAD 2. REMOVE COLUMN HOLE COVER SILENCER SHEET (See page SR-9) 3. DISCONNECT NO. 2 STEERING INTERMEDIATE SHAFT ASSEMBLY (See page PS-21) 4. DISCONNECT NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY 5. REMOVE FRONT WHEEL 6. REMOVE ENGINE UNDER COVER LH 7. REMOVE ENGINE UNDER COVER RH 8. REMOVE FRONT STABILIZER LINK ASSEMBLY LH (a) Remove the 2 nuts and front stabilizer link LH. HINT: Use a 6 mm hexagon wrench to hold the stud if the ball joint turns together with the nut. 9. REMOVE FRONT STABILIZER LINK ASSEMBLY RH HINT: Use the same procedures described for the LH side. 10. DISCONNECT TIE ROD END SUB-ASSEMBLY LH (See page DS-6) 11. DISCONNECT TIE ROD END SUB-ASSEMBLY RH (See page PS-21) 12. DISCONNECT PRESSURE FEED TUBE ASSEMBLY (See page PS-21) 13. DISCONNECT FRONT SUSPENSION NO. 1 LOWER ARM SUB-ASSEMBLY LH (See page SP-22) 14. DISCONNECT FRONT SUSPENSION NO. 1 LOWER ARM SUB-ASSEMBLY RH HINT: Use the same procedures described for the LH side. 15. REMOVE FRONT FLOOR PANEL BRACE (See page EX-2) 16. REMOVE CENTER EXHAUST PIPE ASSEMBLY (See page EX-2) 17. REMOVE HOOD SUB-ASSEMBLY 18. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY 19. SUSPEND ENGINE ASSEMBLY (See page MX-19) 20. REMOVE NO. 1 HOOK (See page PS-22) 21. REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY (See page PS-22) 22. REMOVE FRONT NO. 1 STABILIZER BRACKET LH (a) Remove the 2 bolts and front No. 1 stabilizer bracket LH from the suspension crossmember. 23. REMOVE FRONT NO. 1 STABILIZER BRACKET RH HINT: Use the same procedures described for the LH side. 24. REMOVE FRONT NO. 1 STABILIZER BAR BUSH (a) Remove the 2 No. 1 stabilizer bar bushes from the stabilizer bar. 25. REMOVE FRONT STABILIZER BAR
You can download the manual online for about $15. Well worth it.

Posted on Sep 08, 2009

  • 52 Answers

SOURCE: where is the fuse box for a 2005 scion tc

drivers side of engine compartment

Posted on Nov 22, 2009

  • 173 Answers

SOURCE: Resetting an air conditioning system in a scion tc 05

Hello.... First the bad news... Air Conditioning systems do not have a reset. Now the good news... The system could have shutdown due to low fluid... There is a pressure sensing switch in the line that respond to the "Low Fluid" condition.The reason it does that is so that the compressor does not get damaged and cause all sorts of other problems...

The fix... If it has shutdown due to low fluid the system needs to be serviced and it will start working as good as new... Take it to a repair shop with the proper equipment..

Hope this helps.....

Posted on Mar 26, 2010

SOURCE: tire pressure light comes on

You shouldn't be setting the tire pressure to the max inflation pressure listed on the sidewall, that will likely result in uneven tire wear with the center of the tire wearing out prematurely. You should set the pressures according to the listings in the door jam. Most likely 32-34psi. Also, have you checked the spare tire? Some systems monitor and will illuminate the TPMS light if the spare tire pressure isn't within an acceptable range. The spare is often overlooked when checking tire pressures because of a TPMS indicator.

Posted on May 11, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Body control module 2007 scion tc


2007 Scion tC Body Control Module - 1A Auto

www.1aauto.com > 2007 Scion tC
Shop at 1A Auto for a brand new Body Control Module (BCM) replacement for your2007 Scion tC at a great price. 1A Auto has a large selection of Body Control ...

HELP!!! BCM issue 2005 tc - Scionlife.com

www.scionlife.com/forums/scion-tc.../help-bcm-issue-2005-tc-165745/
Jun 30, 2009 - i think i have a possible BCM (body control module) issue with my 05 tc, ... Using 2007 Air Box in a 2005 Scion TC, chowdahound, Scion tC 1G ...

2007 Scion Tc Body Control Module - Auto Parts Discounter


Dec 13, 2015 | Scion Cars & Trucks

1 Answer

I have 2005 toyota scion 2005 tc ,thas have this light on ( ! ) how a reset this light or wat is it for


open glove box inside is a button press it and hold it 5 sec, if it does not go off you need to check tire pressures in all tires. tire pressure warning light

Apr 27, 2011 | 2005 Scion tC

1 Answer

How many miles until I need to change my coolant, brakes, engine belts, rotating/pressure for my tires, alignment, windshield wiper blades and fluid, transmission, air filter, power steering fluid, shock...


depends on how you drive, the car will tell you when you need to change the oil, tire pressure, most tire shops will tell you 5000 miles then rotate tires, remember front to back same side do not change right sides for left sides, as far as trans oil, never, wipers depends on what kind of area you are in.

Nov 29, 2010 | 2005 Scion tC

1 Answer

2005 tC: i HAVE A SCION TC2005 AND I BOUGHT BRAKES BUT DONT...


best thing for you to do is take them back get your money back and go to MIDUS, let them deal with it

May 18, 2010 | 2005 Scion tC

1 Answer

My brake warning light is coming on some on my 2006 scion tc


check brake fluid level first, if ok,,, look at brake pads, they must be worn out by now, change them ,,ok

Oct 24, 2009 | 2006 Scion tC

2 Answers

We were driving my car down the road and it made a banging noise and just turned off...what could it be and is it expensive to fix? 2005 Scion TC


sounds like it needs a motor... check your oil and coolant... motor either ran out of oil or overheated either way the engine is probably smoked... most engine jobs run around 5000 dollars

Jul 16, 2009 | 2005 Scion tC

1 Answer

How do I reset the check engine light for a 2006 scion tc?


YOU CAN GO TO ANY ADVANDED AUTO PARTS AND THEY CAN HOOK UP A OBD2 SCANNER, WE THEY DO ASK THEM TO RESET THE LIGHT FOR YOU.. THIS IS A FREE SERVICE TO THE PUBLIC..GOOD LUCK KEITH..

Mar 14, 2009 | 2006 Scion tC

1 Answer

Can a 2006 Scion Tc cd player fit into a 2005 Scion Tc?


yes its the same plugs but you wont have the steering weal control

Jan 17, 2009 | 2005 Scion tC

Not finding what you are looking for?
2005 Scion tC Logo

Related Topics:

334 people viewed this question

Ask a Question

Usually answered in minutes!

Top Scion Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Brad Brown

Level 3 Expert

13819 Answers

Are you a Scion Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...