Question about 2003 Cadillac Deville

Open Question

Abs and traction control light coming on

My abs and traction control lights come on together, seems more like when i hit a bump. If I turn the car off and restart, the lights go out.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

VWdan
  • 114 Answers

SOURCE: ABS TURN LIGHTS COME ON

need to get abs codes read. it will tell you what wheel to look at.
1.bad wheel bearing, sensor is part of bearing.
2.broken wires to sensor.
3.traction control part of abs

Posted on May 07, 2009

  • 27 Answers

SOURCE: ABS LIGHT AND TRACTION CONTROL LIGHT ON DASH

make sure u didnt break a wire, there are sensors on the brakes, make sure theyre plugged in

Posted on Jun 10, 2009

  • 122 Answers

SOURCE: traction conrol abs

Try seeing if any of the codes are set off. On your climate control section with the ignition on hold the off and warmer button and the display will cycle through the codes. Could be a wheel sensor I had a c1225 LF sensor. Could also be a problem with the Wheel speed sensor harness see TSB# 0005-25-003. When I called my dealer about this TSB they didn't know anything about it. If you shut off the car and disengage the traction control, in the glove box, do the codes go away?

Good luck

Posted on Jul 01, 2009

  • 1 Answer

SOURCE: abs light/traction control light

You can check out what the trouble code is by pushing and holding the information button and the up arrow (right side of instrument cluster above the radio) until all the instrument clusters light. Press the information button (last) to enter test mode. I've had an error C1234, meaning Left rear wheel sensor fault. I found the problem to be a corroded connector under the chasis just under the rear left door about 2 feet in. I had to by-pass (replace 1 wire due to corrosion at the connector.

Posted on Sep 15, 2009

  • 4 Answers

SOURCE: traction control and anti-locks(ABS) lights come on.

Traction control and anti-locks(ABS) lights come on there is sensors that are pluged in behind the rotors check and see if they are disconected or loose sometimes when you change your brake pads they might come loose and not making contact.

Posted on Jul 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE A 2009 GMC ACADIA WHEN I HIT A BUMP THE CHECK ENGINE LIGHT COMES ON , THE ABS LIGHT COMES ON AND STABILY TRACK LIGHT COME ON WITH A TROUBLE CODE U073 AND A U121


U073 is a communication code from one module to another to simply put it. Code U073 refers to a communication problem with the electronic brake control module ( Which controls ABS/Traction and stability ). I would suspect a loose connection/shorted wiring or even possible internal problem with the brake control module.If the issue occurs after hitting a bump, most likely a loose connection or the wiring rubbing somewhere causing a short from the brake control module.

Nov 11, 2015 | 2009 GMC Acadia

1 Answer

Abs and traction light comes on in my 2001 grand am when I hit a bump


Scan the abs module for codes. It is likely there is an issue with either a speed sensor or a wiring harness to one FI the wheels. The codes should help identify which wheel is having the problem. You can then focus your attention to inpsecting the components on that wheel. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Mar 14, 2012 | 2001 Pontiac Grand Am

1 Answer

Low traction light sometimes comes on.Weeks go by and it doesnot come on .Then all of a sudden low traction appears again


I have three 1997 Olds Cutlass's. They do it to! Nothing to worry about. They will do that in response to a bump, or washboard road driven over at a certain speed. The wheel speed sensor on each wheel tells the computer how fast each wheel is turning. If one wheel speed is faster than the other three, as when you hit a bump, the computer thinks it is loosing traction and flashes the light, and may or may not engage the ABS system to even up the speed on all four wheels.

Now if that light comes on, and STAYS on, that is another matter. It will only do that if a wheel speed sensor becomes faulty, and then the ABS light will override the traction light.

Drive on!!!

Aug 29, 2011 | 1996 Chevrolet Cavalier

1 Answer

I have a 1999 Cadillac Deville , the situation the car is raised high in the back rear suspension, with two lights on . The ABS light and the Stablize Traction lights on. What is the problem ?


HAVE VECHICLE CODE SCAN,SOUND LIKE YOU HAVE PROBLEMS WITH ABS BRAKES AND THE TRACTION CONTROL,SEEM LIKE YOUR AIR SHOCKS ELC HEIGHT SENSOR COULD BE BAD CAUSING AIR SHOCKS TO OVER EXTEND CAUSING CAR TO RAISE HIGH ON BACK END.WHICH COULD BE THE CAUSE OF ABS AND TRACTION LIGHT TO COME ON, TO FIX THIS PROBLEM HAVE CAR CODE SCAN AND YOU CAN FIND OUT WHAT CAUSING THE ABS AND TRAC LIGHT TO TURN ON.

Apr 03, 2011 | Cadillac DeVille Cars & Trucks

1 Answer

After hitting a bump my abs and tc lights came on in my 2005 equinox. They went of when i started the car again then came on after going over a speed bump


Hello.
The ABS, ( anti-lock break system ) has a sensor on each wheel that can come lose after hitting dips and speed bumps. If you are mecahanical you may be able to fix it yourself, if not, any auto shop can fix it in just a couple of minutes.

I'm not real sure about the tc, ( traction control ) system, sorry.

Donnie

Mar 25, 2011 | 2005 Chevrolet Equinox

2 Answers

ABS LIGHT AND SERVICE TRACTION CONTROL LIGHTS


Hello there:
There is a abs wheel sensor that is on the hubs on these vehicals that should be changed if the light that you are getting comes and goes this happens when the signal from the sensor to the abs system has been interupted you can take it to autozone and have them clear the code for you till you can get this repaired these sensors can cost around 150 to replace ok

Jul 14, 2010 | 2003 Chevrolet Monte Carlo

4 Answers

Why does my TCS and ABS lights come on while driving? I can find no button to not use these options. I drive a 2001 Hyundai Sante Fe. Are they supposed to come on automatically?


no theres a problem with the abs, when abs doesnt work it turns on both those lights, you have to have computer scaned to get codes to diagnose the problem, it maybe just a wheel sensor. you cant turn it on or off, but you can still drive like that you just wont have abs trac-control when lights on computer shuts it down, so its like you shut it off, if you dont need it then dont fix it,wont affect running of engine .good luck.

Nov 07, 2009 | 2001 Hyundai Santa Fe

1 Answer

2001 Mercury Grand Marquis brake and ABS dash lights on and off


The red brake light is the key here. That usually indicateds a hydraulic problem. Check you fluid level in master cylinder and see if it is low. Also the level indicator sensor there in the master cylinder maybe sticking or corrioded. If ABS sees the red brake light it will shut off and turn on the ABS light,also traction control would be disabled as well.

Feb 04, 2009 | 2001 Mercury Grand Marquis

Not finding what you are looking for?
2003 Cadillac Deville Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...