Question about 1994 Chevrolet Silverado 2500
I recently replaced my radiator lines are all hooked up right fan blows but heater not heating up
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: NO Heat in 1999 CHevy SIlverado
flush the heater out with a hose. the fastest and cheapest. if that dosen't work then replace the Air blend actuator motor. $59.99 at Auto Zone part # 604-101
Posted on Feb 27, 2009
After replacing the thermostat, you must bleed the air from the cooling system.
To bleed air from the 2.2L and 2.5L engines, remove the plug or sensor on the top of the thermostat housing. Fill the radiator with coolant until the coolant comes out the hole. Since the plug is made out of steel and the thermostat housing is aluminum, it is a good idea to apply an anti-seizing compound or Teflon® tape on the plug threads prior to installation. Install the plug and continue to fill the radiator. This will vent all trapped air from the engine.
Any trapped air in the heating system will have to be displaced by coolant. Once the cooling system is filled, with the radiator cap off, turn of the heater at it's highest setting. Start the engine and allow it to reach operating temp. You should see a drop in the coolant level as the air in the heating system is displaced by coolant. Add coolant to the proper level and replace the radiator cap.
Keep a close eye on the coolant level for at least the next couple of weeks. The cooling system is a "closed" system. Any significant decrease in coolant level indicates a problem.
If you have any questions, let me know.
Please take the time to rate this solution.
Drive safe and be warm.
Posted on Feb 02, 2009
Flushing the radiator, replacing the radiator cap, adding new coolant, replacing the sensors and a new thermostat solved the problem. Probably didn't need to do all of these things - but since we just purchased the truck, and given the fact that is probably hadn't been done in a while, we chose to do all of these things (which really didn't cost a whole lot), it's running like a charm now.
Posted on Jun 03, 2009
Tips for a great answer:
Jan 10, 2013 | 1999 Chevrolet Silverado 1500
Dec 05, 2012 | 1994 Chevrolet Silverado 2500
Mar 21, 2011 | 1999 Chevrolet Silverado 1500
Jan 23, 2011 | 1994 Chevrolet S-10 Blazer
Jan 03, 2011 | 2001 Chevrolet Silverado 1500
Dec 06, 2010 | 1994 Chevrolet Silverado 2500
Oct 25, 2010 | Ford Laser Cars & Trucks
Oct 25, 2009 | 1984 Pontiac Parisienne
Oct 24, 2009 | 1994 Chevrolet Caprice Classic
Mar 12, 2009 | 1999 Chevrolet Silverado 1500
187 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: