Question about 1993 Jeep Wrangler

Open Question

Need a 1993 jeep wrangler spark plug wire diagram

Show my a picture of spark plug wire diagram

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1779 Answers

SOURCE: Need diagram for 1998 Jeep

hi, you didn't say what engine you have, I'll assume it's the 4.0 L in line 6 cylinder. Standing on the PASSENGER side of the jeep, the spark plug at the front of the engine is #1, the next is #2, and so on to #6 which is at the back (nearest the windshield).
The distributor is between you and the valve cover on the engine. Pretend the top of the distributor cap is the face of a clock.
The #1 spark plug wire goes in the cap at what would be the 6 o'clock position, (as viewed from your position standing on the passenger side, facing the side of the engine). The firing order direction is clockwise, so the 'hand' of the clock (actually the rotor in the cap) would continue to the next distributor cap plug in, which would be spark plug wire to #5 (8 o'clock position), then #3 (10 o'clock position), #6 (12 o'clock position), #2 (2 o'clock position), #4 (4 o'clock position). So all this means isi your firing order is, 1,5,3,6,2,4 If you have a different motor or any questions, let me know. Good Luck! countrycurt0

Posted on Aug 07, 2008

ZJLimited
  • 17970 Answers

SOURCE: I need the spark plug wiring for a 1993 jeep 4l

The firing order can usually be found cast onto the intake manifold
d89ea9b.jpg

4.0L engine Engine firing order: 1-5-3-6-2-4 Distributor rotation: Clockwise
42e3dc6.jpg

Good luck (remember rated this help).

Posted on Sep 03, 2009

  • 1596 Answers

SOURCE: i need a diagram of

Firing Order 153624 Clockwise rotation #1 Piston is First Front of engine #1 on Distrib Cap is at 9 Oclock #6 is at 3Oclock Notes Firing Order L6 42144651

Posted on Jan 26, 2009

ZJLimited
  • 17970 Answers

SOURCE: need wiring digram from spark plugs to distributor cap

Review the Jeep ZJ Repair Manual in the Firing Order (page 10 and 11) for 4.0L 6-cyl and 5.2L 8-cyl.

I really hope hepled with this (remember rated this help) Good luck.

Posted on Nov 18, 2009

  • 7353 Answers

SOURCE: 2001 jeep wrangler 2.4l spark plug wires were

2.5L engine. 1 3 4 2 Number 1 should be approx 5 o'clock position, the order goes clockwise.

Posted on Mar 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

On my 1993 wrangler with a 2 5 if i try to start it it only fires on cylinder 1 and 3 if i shut it off and try again it fires only on 2 and 4 what would cause this


Sounds like a spark plug or distributor problem.... Change out all your spark plugs and check your wires for breaks. Check fuel injectors for build-up.

Feb 06, 2016 | 1993 Jeep Wrangler

1 Answer

I need a diagram to put a wiring harness from a 1994 4.0 jeep wrangler in a 1993 4.0 jeep wrangler


check chiltons manuals, they usually have wiring diagrams in the back of them to show you all you need. its hard to find online ones. you always have to pay for those ones

Mar 21, 2012 | 1994 Jeep Wrangler

1 Answer

Spark plug wire diagram


Check this for your 1993 Jeep Grand Cherokee 5.2 liter V-8 VIN "Y"


10_4_2011_3_34_41_pm.gif

If you need additional details, contact with the Jeep lovers.

Hope this helps; remember to rating this free answer.

Oct 02, 2011 | 1993 Jeep Grand Cherokee

1 Answer

I was driving my 1993 Jeep and it turn off will turn over but won't what could it be ?


Check for blown fuses. You need to find out if it is getting fuel and spark. To check for fuel, crank the engine for about 10 seconds, Remove a spark plug. If the plug is wet and smells like gasoline, then the fuel is ok. It the plug is dry, then you are not getting fuel. While you have the plug out, reattach the spark plug wire to the plug, lay the plug down somewhere on the engine so you can see it when you crank the starter. If your getting spark, there will be a spark jumping between the electrodes on the end of the spark plug as you crank the starter. Let me know what you find and we will try to find out what the problem is.

Jan 13, 2011 | 1993 Jeep Wrangler

2 Answers

2001 jeep wrangler 2.4l spark plug wires were disconnected I need the wiring diagram to reconnect


2.5L engine. 1 3 4 2 Number 1 should be approx 5 o'clock position, the order goes clockwise.

Mar 11, 2010 | 2001 Jeep Wrangler

2 Answers

I need picture of the correct order in which the spark plug wires from the distributor runs to the engine of a 97 jeep wrangler 4.0


straight six engine ,153624 firing order i know no2 and no4 leads have a sort of loop on the jeep engine and i should imagine this is the same on this model ,if you dont know where no one is then remove the rocker cover and turn engine over till the valves on no1 are closed and remove the plug to make sure piston is at top ,then you have the position on the distributor cap where no1 is ,lift cap and see where the rotor arm points too ,then this is no1 .then clockwise rotation the next hole is no5 and so on

Dec 24, 2009 | 1997 Jeep Wrangler

1 Answer

The fuel pump doesnt come on and there is no spark.....


Check for the fuse for the fuel pump and the relay. Other than that it may be a wiring issue or a computer module issue.

Dec 13, 2009 | 1993 Jeep Wrangler

1 Answer

Need fog light installation instructions


Stop by your local Jeep dealership and ask teh service tech to go over the schematic and wiring diagram with you.
Most Jeep service depts. are quite helpful and won't charge you for knowledge.
Then head over to NAPA and get the parts for cheap.
If you are restoring to factory specs for show car purposes, you should get the MOPAR parts right from the dealer.
Most of the time the Jeep Wranglers have the wiring already in place, you just have to know where to look for the unused plug. At least that's how it is with my 2007 JKL Rubicon.

May 13, 2009 | 1999 Jeep Wrangler

Not finding what you are looking for?
1993 Jeep Wrangler Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...