Question about 1991 Dodge Dynasty

1 Answer

Transmission slips after a block of driving

I have a 91 dodge dynasty 3.3 V6 and the trans slips out of gear after a block of driving,,,, when the car is turned off then started again you can drive another block before it happens again... fluid level is perfect.. the car had a flush at 122 k and the probloem started to happen at 133 k reverse is fine no problems,, need help

Posted by on

  • smcorbett777 Apr 16, 2009

    hey my dynasty won't shift oout of 1st gear. tried another tranny and same result. It stays in first gear no matter what. Can you help. Love my car and really don't want to get rid of it.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 100 Answers

Hello
Welcome to FixYa
sounds like you have a bad tcm
transmission control Mogul.
you will need to have it scanned for codes
sometimes it can be re-flashed or repaired but you might need to replace it.
most auto parts stores will do this for no charge
(scan the computer)
RD

Posted on Jan 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dodge dynasty 91 gear shift stuck in first


SOUNDS LIKE A CABLE/ SHIFT LINKAGE ISSUE, FOLLOW IT OUT THE FIREWALL AND DOWN TO THE TRANS, GET SOMEONE TO HELP AND WATCH IT MOVE, CABLE COULD BE SIEZED.

Jun 08, 2013 | Cars & Trucks

1 Answer

1989 dodge dynasty v6, fwd, transaxle 3 speed auto, good condition, experiencing shift problem, doesnot want to shift into passing gear, sometimes it does, right now it doesn't, any takers


most auto trans don't shift into reverse when low. Reverse takes the most fluid of all the gears.
Check for a bad shift solenoid or wires to and from that circuit. Most trans-axles have them now.

Feb 25, 2013 | 1989 Dodge Dynasty

1 Answer

I have a 91 honda accord with an automatic trans. & when i shift into reverse it refuses to engage & makes a high pitch gear slipping grinding sound ! NOT GOOD ! ,I just replaced the transmission con


Definitely not good. The transmission is slipping internally due to worn gears and clutch packs. It will have to come out for rebuilding, IMO. Have a transmission shop check it out.
Good luck.

Dec 23, 2011 | 1991 Honda Accord

1 Answer

Transmission slipping


You have a problem with the bands in the transmission. They will need to be adjusted to correct the problem. Also have the transmission filter changed with new transmission fluid. Check the fluid level in transmission first,if low add fluid and test drive. If its the same as before you will need to go to a transmission place to have the bands adjusted to correct the problem. Hope this will help you.

May 23, 2010 | 1993 Dodge Dynasty

1 Answer

Transmission for dodge dynasty v6 3.3 front wheel drive only goes forward no reverse


check to make sure your fluid is full, start car allow to warm then check fluid on level ground , if fluid is full then reverse gear my be blown. will need a used trany or rebuild that one if car is worth the cost.good luck.

Feb 19, 2010 | 1991 Dodge Dynasty

3 Answers

Serpentine belt diagram for a 3,3l dodge dynasty with ac


For the 1991 DODGE DYNASTY - V6 3.3L 201ci GAS FI N R , review this informacion:

Belt Routing Diagram
- Multiple Accessory, w/o A.C. (Mfg. After 2/27/91)
- Multiple Accessory, w/A.C. (Mfg. After 2/27/91)
- Multiple Accessory, w/o A.C. (Mfg. Before 2/27/91)
- Multiple Accessory, w/A.C. (Mfg. Before 2/27/91)
684ce70.jpg


Remove the serpentine belt by using a breakover bar, rachet or serpentine belt removal tool with the correct size socket for the pulley mounting bolt. Rotate tensioner arm to release tension. Remove the belt.

Hope helped with this (remember rated this help) Good luck.

Nov 12, 2009 | 1991 Dodge Dynasty

1 Answer

I did a motor swap on my 1992 dodge dynasty with the 3.3 L V6 I have a 4 speed automatic my car will stay in second gear and occasionally into first but will not shift


You need to have the Transmission Control module scanned. You might have a bad speed sensor or maybe you forgot to plug one of them back in? You have checked all of the plugs to the transmission?

Aug 12, 2009 | 1992 Dodge Dynasty

1 Answer

MY 1993 dodge dynasty will drive forward for about a block and slip out of gear, you can then pull over stop the car and put it in park and then start the car again and it will go another block. It will...


You are going to need to have the trans pulled again. There aren't any electrical problems that can cause no reverse. Also it sounds like the 2/4 clutch is burnt and when it slips it puts it in limp and 2nd is gone. Hopefully the shop that did it in July will help you with a warranty.

Mar 24, 2009 | 1993 Dodge Dynasty

1 Answer

Hi i have a 91 dodge dynasty and im having transmission troubles


Try changing the fluid. A bottle of lucas on old fluid (assuming it is) won't do anything except cause more problems. Adding an additive that cleans to dirty fluid will cause varnish in the system and possibly cause transmission failure or lose of reverse etc. To sound a bit elementary confirm the level on level ground with engine and tran warm. Hope this helps

Nov 04, 2008 | 1991 Dodge Dynasty

Not finding what you are looking for?
1991 Dodge Dynasty Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

63575 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...