Question about 1984 Nissan Pickup

Open Question

Timing mark on the cam for a 88 nissan truck - 1984 Nissan Pickup

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

michigan man
  • 3533 Answers

SOURCE: timing mark

give this website a try to see if they have the information you need www.alldatadiy.com

Posted on May 20, 2009

  • 509 Answers

SOURCE: how do the marks on the cams align to set timing

Hope this picture helps you...

56c6526.jpg

Posted on Jun 21, 2010

  • 11 Answers

SOURCE: Timing chain not marked truck

there should be a corresponding mark on the wheel and on the cover. what specifically is your engine? the marks on the wheel could be a punched rounded mark while on the timing belt cover the mark looks like it has been made by a hacksaw when #1 piston is on TDC youre closest to the mark. you can also crank the cam wheel to the cycle where its on ignition stage-this also is the closest to the mark

Posted on Jul 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the timing diagram of nissan safari petrol 6 cylinder 28L engine it use timing chain


On those old Nissan's you will usually have a mark on the cam gear and a mark on the crank gear. Then your timing chain will usually have a number of different color links. You will place one link on the cam mark and the other end of the row of colored links on the crank mark. I can not help you with your particular model though as I do not have a manual.

Jun 02, 2015 | Nissan Cars & Trucks

1 Answer

Timing marks-nissan petrol pick-up


ok if the engine is still running look for the mark on the damper pulley then find the mark on the block,then try lining them up with the tdcmark,then check your cam if the marks on the cam is not line up rotate it again then watch the marks they should by now,and if you are not sure put your own marks on all the pulleys and you should be ok

Apr 29, 2014 | 2007 Nissan Sentra 2.0 SL Sedan

1 Answer

Can some one show me timeing mark on 1997 nissan maxima please


wow a Nissan Camry.
what engine, ??????????
what are you doing, we dont know. so..
cam marks? chain marks?
spark timing?

in 1997, most cars have 6 or more marks.

Nissan V6? is it (guessing i am)
if doing major cam work , you will need far more that just mark data.

if doing serious work, i recommend the below
  1. a real FSM, from NISSAN if Nissan.
  2. alldata.com
warning:1
all nissan engines are All Interference
so doing cam work or finding engine dead,
do a leak down test by hand before cranking engine
or bend the valves.
after replacing chain, do a cyl. leak down test (a tool)
and if it fails, the valves were bent, do not crank engine
or the damage WILL cascade $$$$$$$$$$$$$$

Feb 22, 2014 | 2006 Toyota Camry

1 Answer

Mark position timing belt for nissan bluebird ca20e single cam


The mark position timing belt diagram for Nissan Bluebird ca20e single cam:

ededc5c.png

Jul 13, 2010 | 1992 Nissan Stanza

1 Answer

Where should the timing marks on the cam be positioned on a 2002 Nissan Xterra 3.3L V6?


Click on the following direct Link. It has several Diagrams regarding the Cam Position Timing Marks.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2002/make/nissan/model/xterra/2002_nissan_xterra_timing_belt_diagram_marks.htm

Mar 18, 2010 | 2002 Nissan Xterra

1 Answer

Hi i have a 1989 Nissan Cefiro and having a


there should be a small mark on the block and indentation

Jul 05, 2009 | 1989 Nissan Maxima

1 Answer

1997 nissan pathfinder timing off. I replaced water pump(behind timing belt). Timing "gears" got moved (two top ones). I don't know how to make sure everything is lined back up correctly.Any ideas?


The cam sprockets should have marks on them (dimples) that should align with marks on the rear timing cover. There should also be a similar dimple on the crankshaft timing sprocket. These will align with their respective marks when the engine is at TDC. The alignment marks are in the following locations as you look at the front of the engine: RH cam sprocket at approximately 11:00, LH cam sprocket at approx 1:00, Crankshaft timing sprocket at approx 4:00 or 5:00. IF you can't find the marks on the cover, put the marks on the sprockets in those approximate positions and set the belt by using a belt tooth count between the marks. Cam to cam should be 40 teeth between the cam marks. Between the LH sprocket and the crank mark should be 43 teeth. You can check TDC by removing your number 1 cylinder spark plug and carefully inserting a long screwdriver and watching the rise/fall as you hand crank the crankshaft into position (which is much easier with the plugs out)

Feb 28, 2009 | 1997 Nissan Pathfinder

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...