Question about Dodge Ram 2500
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
click on this link, and scroll down to 5.7L
Posted on Dec 22, 2008
SOURCE: 1995 dodge ram 1500 V8
hi, you should find a serp. belt routing diagram on the cross member that supports your radiator. if not- disconnect neg batt terminal for safety. you'll need a long breaker bar metric. as most, if not all fasteners on your ram are in metric. cant remember right size socket, but just go through your metric set and "eyeball"it. once you have the proper socket-detention the belt by pulling breaker bar clockwise. remove old belt. it maybe useful to take a picture of how your old belt is routed with a camera equipped cell phone (if it is still on) so that if you get into trouble, you can look at the picture as a reference point. new serpentine belt install--insert new belt over the cooling fan route under crank pulley-over fan pulley, around p/s pump pulley,up and around a/c comp pulley, under idler pulley, over alternator pulley and finally around tensioner pulley. pull breaker bar clockwise to slip belt past and onto the tensioner pulley. release tension on tensioner. be sure to check tensioner indexing marks located on the tensioner arm this is to make sure the new belt is installed properly. reconnect neg batt cable to terminal-remove any hand tools from engine bay, start engine and observe belt operation. hope this helps!
Posted on Feb 13, 2009
try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you
Posted on Mar 12, 2009
When I do those I find it's easier to get some of the stuff out of the way. Fan shroud, Alternator, AC compressor(don't remove AC hoses just swing it over to the side) and the AC/alternator mount bracket. If you don't have the special hose clamp plyers they are worth buying. (those clamps are difficult with regular plyers) The fan clutch has a special wrench which is thinner. When you start the job break loose the fan clutch before you remove the belt. It keeps tension on the pulley. The nut is normal threading and usually comes loose with a sharp rap of the hammer on the fan clutch wrench.
Here is an illustration of the water pump bolts. I hope this helps you out. let me know how it goes.
Posted on Apr 05, 2009
Tips for a great answer:
Sep 15, 2015 | 1995 Dodge Ram 2500
Jul 02, 2015 | Dodge Cars & Trucks
Apr 22, 2014 | 1995 Dodge Ram 2500
Apr 01, 2014 | 1995 Dodge Ram 2500
Apr 04, 2011 | 1995 Dodge Ram 2500
Jul 12, 2010 | 2001 Dodge Ram 1500 Truck 2WD
Feb 07, 2010 | 1995 Dodge Ram 2500
Jul 01, 2009 | 1998 Dodge Ram 3500 2WD
Mar 14, 2009 | 2001 Dodge Ram 1500 Truck 2WD
Jul 19, 2008 | 1995 Dodge Ram 2500
May 20, 2018 | Dodge Cars & Trucks
296 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: