Question about 2008 Hummer H3

Open Question

Cant find 2008 hummer h3 amp location - 2008 Hummer H3

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 11 Answers

SOURCE: i want to reset the hummer 2008 h3's dashboard

switch ignition on. press instrument switch on off until oill reset appears then hold switch down for about 5 seconds and listen for faint bleeping noise oil is then reset.

Posted on Jul 20, 2009

carputers
  • 255 Answers

SOURCE: 2008 Hummer H3 The trackion failed light on

clean abs sensors at each wheel.

Posted on Sep 08, 2009

  • 474 Answers

SOURCE: hummer H3 (2008) does not start and error message

your anti theft is activated. consualt owners manual

Posted on Nov 28, 2009

bschilz
  • 2049 Answers

SOURCE: where is the thermostat on a h3 hummer located

Follow the top radiator hose to the engine block. The thermostat sits under the housing that the radiator hose connects to. There should three bolts holding down the housing and it's easy to remove.

Posted on Jan 11, 2010

swampthang90
  • 18 Answers

SOURCE: 2006 Hummer H3 a/c & heater fan/blower failed

Probably too late now, I am sure you have already fixed it, but mine did this and it was an electrical part that is mounted right beside the blower fan. The part was OK, but the plug into the part was arcing and burned out the connection. A Chevy mechanic told me this has been happening to MANY Chevy products. I had to buy a new part and plug assembly with new wires, about 100 dollars, and I spliced them together. It was an Easy fix, but I shouldn't have had to do it :(

Posted on Mar 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My hummer h3 2008,the oil pressure lindicator


The engine will shut down to protect itself,check the oil level and see whether the car has oil.The light comes on if the oil level is low or the oil pump is not pumping any oil.I replaced my engine hummer h3 two weeks ago due to a malfunctioning oil pump.Check if you oil pump is not malfunctioning.Good luck hope you have not damaged anything further like the bearings due to lack of oil.

Sep 17, 2014 | 2008 Hummer H3

1 Answer

Where is the inside fusebox located on a h3 hummer


The hummer H3 has only one fusebox which is inside the engine compartment behind the battery

May 22, 2014 | 2008 Hummer H3 Adventure

1 Answer

Heater motor not working 2006 H3 hummer


Here is a link to the step by step instructions for the fix. Easy to do. I had the same problem with my 06 H3 and fixed it myself and saved some serious $$$ http://www.hummerforums.com/forum/hummer-h3-17/ac-blower-fix-19208/

12_22_2012_11_57_56_am.jpg

Nov 25, 2012 | 2008 Hummer H3

1 Answer

Reset computer 2008 hummer 3 3.7


Check fuse for diagnostic connector.

Jul 19, 2012 | 2008 Hummer H3

2 Answers

2008 Hummer H3 idiling then shutting off/ hard cold start


Check the coolant level please,my hummer wont start when the coolant is low in the engine

Mar 15, 2012 | 2008 Hummer H3

1 Answer

4 wheel drive h3 turn off


It dosnt trun off it is all wheel drive, just make sure you are not in 50-50 or low you will be cool ive been driven one sence 06

Nov 17, 2011 | 2008 Hummer H3

2 Answers

I have a Hummer H3. I hear Noise from wheels while turning & doesn't stop. Also I hear a grinding noise when I hit the brakes. Dealer had to resurface rotors. Problem started at 15000 miles. Took it...


Ranjit,

I have the same problem with my 2008 Hummer H3. I had the front and rear rotors resurfaced. I am now thinking of getting the rotors replaced with bigger more durable rotors. Solution about the sticking brake caliper sounds about right if you hear a grinding noise as you drive without even touching the brake pedal.

Amardeep

Feb 18, 2011 | 2008 Hummer H3

1 Answer

Oil filter part number hummer h3


K and N site part nos ...h3 k33hp2006..........h2k33hp1007,look on the site depends on engine,but good info,Kand N seems good enough,especially with High Perfrmance bikes, MX etc

Nov 05, 2009 | 2008 Hummer H3

1 Answer

2008 Hummer H3 The trackion failed light on


clean abs sensors at each wheel.

Sep 08, 2009 | 2008 Hummer H3

Not finding what you are looking for?
2008 Hummer H3 Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hummer Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Hummer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...