Question about BMW Cars & Trucks
How to access the fog light
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Use a wrench to remove the mounting bolt from the underbody through the hole in the splash shield.
Remove the fog light assembly from the bumper by pulling its inner edge first, then the whole assembly out of the bumper.
Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down.
Remove the bulb from the fog light assembly by turning it one quarter turn counterclockwise.
Push the electrical connector onto the new bulb.
Turn on the fog lights to test the new bulb.
Reinstall the fog light assembly into the bumper. Tighten the mounting bolt.
Insert the new bulb into the assembly and turn it one-quarter turn clockwise to lock it in place.
Hope this helps you.
Posted on Nov 22, 2009
partially remove the desired light by remove the 4 8mm screws, two ont the top and two at bottom behing the light, pull the light out far enough that you can see the socket,you should be able to remove it at that point.You should also check the contact of the bulb as it is most likely burned or melting and has damaged the socket so you should replace he socket and bulb as the warning may still be present even though the bulb works.Also the rear tail lights have a corrosion and burning issue as well on the brake contacts.
Posted on Mar 29, 2010
Tips for a great answer:
Mar 02, 2016 | 2003 BMW X5
Sep 06, 2014 | Cars & Trucks
Nov 30, 2013 | 2007 BMW X5 3.0si SAV
Feb 05, 2011 | 2007 BMW X5 3.0si SAV
Feb 27, 2010 | 2007 BMW 335i Coupe
Feb 23, 2010 | 2003 BMW 5 Series
Jul 17, 2009 | Hyundai Santa Fe Cars & Trucks
80 people viewed this question
Usually answered in minutes!