Question about 1998 Ford Mustang

Open Question

What is stock thermostat temperature for 1998 ford mustang 3.8 litre V6

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

REDOIL
  • 355 Answers

SOURCE: 1998 ford winstar 3 litre keeps stalling new fuel

WELL THIS VAN HAS MANY ISUSES NEED TO JECK FOR VACUME LEAK AT IN TAKE AND THE PLENUM IF ITS PLASTICK THEY TEN TO CRACK OR THEY HAVE GASKET FAILER VERY COMEN ON THIS CAR OR YOU MAY NEED TO CHECK EGR VALVE IF STUCK OPEN IT WONT IDLE THEN YOU HAVE THE IAC VALVE IDLE AIR CONTROL VALVE YOU CAN USE BRAKE CLEAN AROUND IN TAKE BUT BE VERY CARFULL FLAMIBAL SHOULD HAVE FIRE EXTINGSHER NEAR YOOU WHEN DOING THIS

Posted on Aug 19, 2009

Testimonial: "thanks turned out to be the air flow sencer on the breather so thanks to you i located and fixed the problem"

  • 89 Answers

SOURCE: what kind of power steering fluid is used for a

Do not use DOT 3 brake fluid in a power steering pump. It will eat away all of the seals and hoses. If you are looking at power steering fluid, any power steering fluid will work. If we are talking about brake fluid, Then yes use DOT 3 brake fluid or DOT 4 break fluid. The top of the master cylinder should tell you which to use.

Posted on Jan 03, 2010

  • 65 Answers

SOURCE: how to replace brake pads on 1998 ford mustang

break lug nuts loose
jack up car place stand under car
remove lug nuts and wheel
remove brake caliper
take out pad on outside of caliper
place a brake caliper press on pad next to piston of caliper and compress piston back in caliper
remove press and replace pads
reinstall caliper and wheels set car down
REMBER TO GET IN AND PUMP BRAKE PEDAL A COUPLE TIMES OR YOU WILL NOT HAVE ANY BRAKES WHEN YOU MOVE YOUR CAR!!!!!!
check fluid in master cylinder
take your time

Posted on Feb 25, 2010

  • 84 Answers

SOURCE: Timing belt replacement 06 V6 Ford Mustang

every 60k to 80k miles is when i change timing belts but there like most other belts they can always brake when they want to but sticking with that should save u alot of headaches

Posted on Mar 21, 2010

  • 5 Answers

SOURCE: 1998 ford mustang 3.8 v6 starting problems.

it's your upper intake manifold gasket. it has a crack in it and needs to be replaced. your getting to much air and not enough gas. mine did the same thing.

Posted on Apr 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Diagram of bank 1 and 2 sensor 1 1995 ford mustand 3.8 litre


O2 sensor I'm guessing .. I t would be the second one back on the side with cylinder one on it , the distributor cap is marked on the number one cylinder wire

Aug 01, 2016 | 1995 Ford Mustang

1 Answer

How much antifreeze do I need in a 1998 mustang v6


The cooling capacity for your car with or without AC is 12.6qts or roughly 3 gallons. You typically only need a mixture of about 50% Coolant to 50% water. The antifreeze bottle will have a chart on the back.

Mar 17, 2015 | 1998 Ford Mustang

2 Answers

1998 mustang v6 3.8 motor starts and the ati theft


Chip key takes 2 working keys to reprogram otherwise Call dealership or locksmith

Aug 01, 2010 | 1998 Ford Mustang

1 Answer

Firing order diagram on 4998 ford mustang


Firing order diagram on 1998 Ford Mustang V6: 1 - 4 - 2 - 5 - 3 - 6 LEFT bank numbered 1 to 3, right bank numbered 4 to 6 coil Pack: 1 2 3 5 6 4

e23db4c.jpg

Please rate my response. Thanks!

May 20, 2010 | Cars & Trucks

2 Answers

1998 ford mustang 3.8 v6 starting problems.


it's your upper intake manifold gasket. it has a crack in it and needs to be replaced. your getting to much air and not enough gas. mine did the same thing.

Feb 02, 2010 | 1998 Ford Mustang

1 Answer

What kind of power steering fluid is used for a 1998 ford mustang (v6)? Is Dot 3 brake fluid ok?


Do not use DOT 3 brake fluid in a power steering pump. It will eat away all of the seals and hoses. If you are looking at power steering fluid, any power steering fluid will work. If we are talking about brake fluid, Then yes use DOT 3 brake fluid or DOT 4 break fluid. The top of the master cylinder should tell you which to use.

Jan 03, 2010 | 1998 Ford Mustang

1 Answer

98 Mustang v6 - no AC


Make sure the radiator pressure cap is the correct one and that the hose is not soft--check the lower hose and heater hoses for softness as well. They should be firm, but not hard or cracking. The temperature sensor is reporting normal operating temperature, so it and the thermostat are working correctly (hot water would blow out of the radiator if it were stuck). Check the cooling fan for free turning and no noise. Check it's grounding connection. Check the fuse box for blown fuses to the fan and to the A/C compressor. Make sure all the relays and fuses are firmly pressed into their sockets. Check the A/C compressor clutch winding for resistance--should not read infinity. Does the blower motor for the heater/A/C run when either is turned on? The A/C switch on the dash may be defective.

Sep 08, 2009 | 1998 Ford Mustang

1 Answer

I have a 1998 4 litre v6 that i want to put in a 1995 3.8 litre v6 mustang, will the transmission bolt pattern line up?


No, the transmission will not bolt up. Also the engine will sit too far forward because the holes are different in the k-member.

Jul 05, 2009 | 1995 Ford Mustang

3 Answers

Engine temperature sensor located on a 1998 Ford Mustang GT


Left hand side (if facing it), behind distributor, above oil fill.

Apr 22, 2009 | 1998 Ford Mustang

Not finding what you are looking for?
1998 Ford Mustang Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...