Question about 2001 Mercury Grand Marquis

Open Question

How to replace the blend door actuator 2001 mercury marquis?

How to replace the temparture blend door actuator?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 4348 Answers

SOURCE: I need t replace the Air blend door actuator on my

This solution is not for a novice. Air flow doors are fragile and easy to damage.

Posted on Sep 07, 2009

Ad
  • 82 Answers

SOURCE: Is there a relearn procedure for blend doors in a

probably has a bad belend air door motor, to run the systen completely through its self diagnosis process" if has electronic auto temp control"
press."off "and "floor" at the same time release... then hit the "auto" button
wait til gives you code...... it will then "SOMETIMES start WORK normal til moved again by you.....
if manual, change hot to cold, listen carefully for clicking ...if clicking rplave blend door motor and inspect the plenums door while motor out

Posted on Jan 20, 2010

johnjohn2
  • 5763 Answers

SOURCE: Mercury 2004 Grand Marquis blend door

replace the blend door motor, unless the blend door itself is broken then theres a replacement door or box that need to be installed, this is a big job, the dash needs to be removed to do this job and ac system drained of freon with an ac machine.

Posted on Apr 06, 2010

Best Try
  • 165 Answers

SOURCE: Is replacing a blend door

Almost book time is 6.3 hours due to the dash has to come out.

Posted on Jan 08, 2011

  • 1 Answer

SOURCE: 2005 Mercury Grand Marquis with

blend door

Posted on Feb 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No heat cold air Mercury Sable 2001 3.0


Thermostat stuck open, low coolant level, stuck blend door or bad blend door actuator, or blogged heater core. Feel both hoses to the heater core. They should both be about the same temp. If one is hot and the other is cold, you have a clogged heater core. If both are hot, then the thermostat is working and you've got a blend air door/actuator problem. Actuator failure is pretty common on these. Remove the actuator and open the door by hand. If you get heat, replace the actuator

Jan 06, 2018 | Mercury Cars & Trucks

1 Answer

I need to know if there is an external heater control valve on the eatc unit in my 2003 grand marquis /


This vehicle does NOT use a heater control valve. Coolant flows to the heater core at all times. Temperature is regulated by the blend air door and blend door actuator. Locate the blend door. Remove the actuator and open the door by hand. If you get heat, the actuator or the control head is bad. FWIW, the actuator is the most likely cause

Jan 06, 2018 | 2003 Mercury Grand Marquis

1 Answer

Location of passenger side blend door actuator on 2006 mercury mountaineer auto controls, 6 cylinder


Temperature Blend Door Actuator - RH, EATC Removal and Installation
  1. Remove the RH floor console finish panel.
  1. Lower the glove compartment.
  1. Disconnect the RH temperature blend door actuator electrical connector.
  2. Remove the 3 RH temperature blend door actuator screws.
    1. Remove the RH temperature blend door actuator.
2006 2010 Ford Explorer NO Heat Passenger Temp Actuator Replacement same as mountaineer

Jun 19, 2017 | Mercury Cars & Trucks

1 Answer

How do you know if you need a manual blend door actuator


Look At It When Moving Controls--You Should See It Move. NOTE: If Blend Door Itself Is Seized Due To Case Problem It Will Damage Actuator (not a uncommon problem)

Feb 28, 2015 | 2004 Mercury Grand Marquis

1 Answer

2008 mercury marquis blender door location


The blend-air door actuator on a 2008 Merury Grand Marquis is located on the top forward area of the HVAC housing under the instrument panel. Complete instrument panel removal is required to access it.

May 26, 2012 | 2008 Mercury Grand Marquis

2 Answers

Heater blows cold air


Hi!
If the Temp. Selector Control is set to Heat and blows cold air, your Blend Door Actuator may be stuck or it is inoperative. The actuator is not fixable, if it fails, it must be replaced. Follow the instructions to remove and replace it.
  1. Disconnect battery negative cable from battery and properly isolate to prevent accidental reconnection.
  2. Remove the instrument panel.
  3. Disconnect the electrical connector from the blend door motor/actuator.
  4. Remove the four screws holding the blend door actuator to the plenum.
  5. Remove the temperature blend door actuator.
BLEND DOOR ACTUATOR CONNECTOR e8349ea.jpg

BLEND DOOR FASTENING SCREWS 9744710.jpg

Show your appreciation with a - 4 THUMBS - rating for answering your FREE question. Thank you for using FixYa.

Oct 07, 2010 | 2003 Mercury Grand Marquis

1 Answer

How do I remove the dash to replace blend door actuator


blender door on a 2003 grand marquis blows only hot air the ac works

Feb 16, 2010 | 2003 Mercury Grand Marquis

2 Answers

2003 mercury grand marquis LS heater does notr blow hot air, blower blows but cold air comes what is the problem


The blend door is stuck in cold position. That usually happens because the blend door actuator has failed.

You will need to test and replace the blend door actuator.

To replace the actuator you will need to take apart the dash and remove completely the instrument panel,d isconnect the connector, remove the four screws, remove the temperature blend door actuator and replace it.

The replacement is not a job for beginners, since you have to take apart the dash to access the actuator.

Regards.


Nov 18, 2009 | Mercury Grand Marquis Cars & Trucks

Not finding what you are looking for?
2001 Mercury Grand Marquis Logo

Related Topics:

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

78238 Answers

fordexpert

Level 3 Expert

5653 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...