Question about 2004 Cadillac Deville

Open Question

Replace license plate bulb 2004 cadillac deville. Do you have to raise trunk to make replacement.

Replace license plate bulb 2004 cadillac deville. Do you have to raise trunk to make replacement.

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 35 Answers

SOURCE: license plate bulb on 1997 Cadillac deville

this is straight out of the book ok



  1. Open the rear compartment lid.
  2. Remove the rear compartment lid trim.
  3. Pull back on the rear compartment trim panel.
  4. Unplug the lamp connector from the rear compartment lid wiring harness.
  5. Press the grommet out of the rear compartment lid.
  6. Remove the nuts retaining the lamp assembly to the rear compartment lid.
  7. Remove the bulb.

Posted on Mar 07, 2009

Ad
landsend
  • 1066 Answers

SOURCE: bulb burnt out on license plate

you need the remove the lighting fixture first to access the bulbs.

Posted on Mar 22, 2009

  • 1 Answer

SOURCE: licence light replacement 1996 Cadillac Deville

remove your license and behind it you will find i think two screws then remove that panel and you should be able to get to it.

Posted on Jan 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace the license plate light bulb on a 2003 cadillac deville


To get at it, you will need to pull the license plate bezel by removing the retaining nuts inside the trunk.

Mar 31, 2015 | 2003 Cadillac Deville

1 Answer

How to


You have to remove the felt trunk cover . Push in retainers come Out with a trim tool or equivalent. Then remove the actual license plate holder . Should be 10mm 4 count . From there you will have access to getting bulb or bulbs out . If both are out could more than just bulbs

Jun 29, 2014 | 2003 Cadillac Deville

1 Answer

How to remove licenses plate bulbs


YOU MAY NEED TO OPEN THE TRUNK, AND REMOVE THE BACK TRUNK PANEL! SOME JUST POP OUT TO GET INSIDE THE AREA BY LATCH, WHERE THE LITES WILL BE

Feb 27, 2011 | 2004 Cadillac Deville

1 Answer

How do I replace a license plate bulb on 04 cadillac srx


Replacing the license plate bulbs was simple. It took all of 20 minutes. Don't let the directions fool you. Remove the lift gate screw.Use a 10mm deep socket to remove the 5 nuts.(you can see the nuts on long bolts).Get a screw driver and gently pry the panel up. You can see everything right in front of you. Easy job if you have ANY kind of common sense.

Nov 05, 2010 | 2004 Cadillac Deville

2 Answers

Bulb burnt out on license plate


you need the remove the lighting fixture first to access the bulbs.

Mar 19, 2009 | 2002 Cadillac Deville

2 Answers

License plate bulb on 1997 Cadillac deville


this is straight out of the book ok



  1. Open the rear compartment lid.
  2. Remove the rear compartment lid trim.
  3. Pull back on the rear compartment trim panel.
  4. Unplug the lamp connector from the rear compartment lid wiring harness.
  5. Press the grommet out of the rear compartment lid.
  6. Remove the nuts retaining the lamp assembly to the rear compartment lid.
  7. Remove the bulb.

Mar 07, 2009 | 1997 Cadillac DeVille

3 Answers

Licence light replacement 1996 Cadillac Deville


remove your license and behind it you will find i think two screws then remove that panel and you should be able to get to it.

Jan 22, 2009 | 1996 Cadillac DeVille

1 Answer

Licence light replacement


Remove license plate, remove screws and detach license plate pocket assembly. Rotate bulb holder, pull bulb straight out and replace.

Jan 22, 2009 | 1996 Cadillac DeVille

2 Answers

License plate light


If you place the flate blade of a screwdriver to the right side of the light(s) housing. And push gently to the left the catch will release and the unit will drop out of the trunk lid. Twist the bulb 1/4 turn and remove. Just reverse the process to complete.
Open the trunk to eye level to see to make it easier to see. Applies to all 02-05 Devilles

Jan 03, 2009 | 2000 Cadillac DeVille

1 Answer

Light Bulb Replaement


I just replaced the license plate lamps on my 2004 Deville DTS.
Lamp is PC195. Lamp PC168 will also work, (it was in my car for the last two years), but it is a brighter bulb than needed.

You pop out the lamp holders by pushing (sliding)the right side towards the left. That little push will unhook plastic tabs from the sheet metal and the right side of the lamp holder will release from the trunk. See the attached photo.

To push the lamp holder, I used a narrow putty knife covered with masking tape. A screwdriver will work as well. The masking tape protects the paint from scratches.

Oct 29, 2008 | 2004 Cadillac Deville

Not finding what you are looking for?
2004 Cadillac Deville Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...