Question about 1997 Chrysler Sebring

2 Answers

Engine will not start no spark jxi v6 2-5 litre

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,101 Answers

Check the ignition control module in the distributor or the crank position sensor

Posted on Dec 05, 2012

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chrysler Master
  • 2,899 Answers

When my Acura does that it usually is caused by loose screws inside the distributor and/or on the coil.

Posted on Apr 16, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

One of the belts in my 2000 chrysler sebring jxi convertible hisses as soon as I start the engine and Im wondering which one it is. It is the closest to the oil well.


Not sure which belt it is without looking at engine. Because of year and being you don't know service records I would replace all belts. The timing belt is in side the engine that usually just breaks without warning. The hissing could also be the air conditioner compressor which I think is controlled by that belt

Jun 18, 2016 | 2000 Chrysler Sebring JXi

2 Answers

My 1998 chrysler sebring convertable wont start I replaced the fuel filter and fuel pump new battery the car will turn over just wont start


Verify you have spark, those are known to have issues with the camshaft sensor in the distributor. I have put 2 distributors in my daughter's 97 sebring jxi, did the same thing.

Jul 22, 2014 | 1998 Chrysler Sebring

2 Answers

1998 Sebring Jxi convertiable turn over but want start


Make sure you have spark and fuel. when you first turn the key to the "ON" position you should be able to hear the fuel pump whirr or run for about 3 seconds to prime the fuel system, if not you need to check the fuel pump fuse and the fuel pump relay to make sure the fuel pump is getting power when you turn the key on. If you can hear the pump run and do have fuel pressure, then you need to make sure the engine has spark. You can do this by removing a spark plug from the engine and putting it back into the plug wire, make sure the metal bottom of the plug is touching a metal part of the engine and have someone crank on the engine while watching the gap in the electrode of the plug. You should have a very sharp blue spark jump the gap in the electrode. If you have no spark or a weak orange looking spark then I would look to the crank sensor or the coil.

Apr 21, 2013 | 1998 Chrysler Sebring

1 Answer

Motor will not start no spark 2-5 v6 engine jxi


2 things to check . crank position sensor or the ignition control module in the distributor

Dec 04, 2012 | Cars & Trucks

1 Answer

Location of spark plugs on 2002 Acura RSX 2.0 Litre Engine


Pull the top cover off,you will have a COP (coil on plug system) remove COP and there the sparkplugs.12_3_2012_8_15_14_am.gif

Dec 03, 2012 | 2002 Acura RSX

1 Answer

I have a 2001 Dodge Intrepid w/ 2.7 litre engine. The engine cranks, engine turns over , but, will not start. If I add fuel to the intake, it will not start. I assume it does not have spark. It has...


you need to have it put on a scan tool to find out what is causing the no start condition.it could be the crank sensor or cam sensor.if the computer doesn`t receive a signal from either of these it will not start.you need to find out with a scan tool what is happening by looking at the readings the computer is seeing.

May 09, 2011 | 2001 Dodge Intrepid

1 Answer

1999 chrysler sebring convertible jxi code p1495 intermittant shut off while driving. Replaced fuel pump and filter, distributor, spark plugs and wire. Was advised by ZJLimited to remove connector from the...


replacing the fuel pump relay is one thing but what about the (ASD auto-shut down) relay

additionally...
  • what engine size?
  • what transmission?
  • any codes?
  • does the pump run KOEO?
  • Do you have spark?
  • What is the cranking speed?

you may find faster service by subscribing to a "live chat" since there are so many questions and variables in your concern

Jun 03, 2010 | 1999 Chrysler Sebring

2 Answers

How do you tune up a 2003 chevrolet silverado ls extra cab 5.3 litre engine


Start with air filter, spark plugs, and wires. Is it having any problems like rough idle, hard start ect?

Jan 08, 2010 | 2003 Chevrolet Silverado 1500

2 Answers

My 1997 JXI Convertible, 2.5 liter engine, won't start.


I need a bit more info, just what is it doing, or not doing?

Aug 13, 2009 | 1997 Chrysler Sebring

Not finding what you are looking for?
1997 Chrysler Sebring Logo

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...