Question about 2001 Jeep Grand Cherokee

1 Answer

Taillight bulb install

I don't have an owners manual, what is the trick to install a tailight bulb

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 82 Answers

Open the liftgate and you should see the screws on the side of the lamp. Unscrew then and pull the lamp away from the vehicle. There should be 3 sockets in the taillamp that screw in and out about the size on a half dollar. Pull this out and pull the bulb out straight and replace by pushing in a new bulb. Follow these directions backwards to replace the lamp. Hope this helps.

Posted on Jan 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 mitsubishi diamonte taillight fuse keeps blowing


check for a short in the bulb holder and that you have the correct bulb in the holder.

Feb 01, 2014 | Cars & Trucks

1 Answer

Taillights ,arenot working don't know where the grounds are located on the moter home


You can try tracing the wires from the bulbs to find where they are grounded to. Check the fuses for the tailights. Do the brake lights work? sometimes the bulbs short circut aswell.

Aug 18, 2013 | Cars & Trucks

1 Answer

I have a 1993 GMC Sierra. If the headlight or parking light switch is on nothing works in the tailight assembly. Blinkers work in the front but blink quickly.Replaced taillight circuit boards with new...


I'd be willing to bet your dash lights don't work either when you turn the headlight on.change the headlight switch, it has a short, it's only about 11 dollars at advance auto, and is fairly easy to replace. my 93 chevy did same thing, changed headlight switch, problem solved

Sep 09, 2012 | 1993 GMC Sierra K1500

1 Answer

I need to know how to replace the taillight housing from my 2002 honda odyssey.


GO INSIDE BY THE PANEL PADDING , PULL IT OUT AND YOU WILL SEE PLASTIC BUTTERFLIES WITH NUT TYPES INSIDE , TURN THEM TO THE LEFT LOOSENING THE TAILIGHT HOUSING, REPLACE THE BULB TYPE AND RE INSTALL.

Nov 01, 2010 | Honda Odyssey Cars & Trucks

1 Answer

Brake light out on dodge journey, how to replace if it is just the bulb


According to the owner's manual for 2009 on pages 464-65:
(1) open the liftgate
(2) remove the two fasteners from the inboard side of the taillight housing.
(3) insert a trim stick between body panel and outboard side of the taillight housing with one hand and grasp the flange on the inboard side of the taillight housing with the other. use the trim stick and hand pressure together to disengage the taillight housing from the vehicle.
(4) rotate the bulb's electrical connector 1/4 turn counterclockwise (lefty loosey) and remove it from taillight housing.
(5) remove the bulb from the connector socket and install replacement bulb.
(6) install the bulb and connector assembly into the taillight housing and rotate the connector 1/4 clockwise to lock it in place
(7) reinstall the taillight housing and fasteners.
don't be surprised if you crack a fastener or two. i hope this helps--good luck. jono

Sep 03, 2010 | 2009 Dodge Journey

2 Answers

My tailights and dashlights won't work because the fuse blows.


it sounds like a short in the park lights.you will have to start by disconnecting headlight switch then install fuse,then check all park light bulbs and there sockets, its gonna be a bad switch or socket, enless theres a wire touching ground ,but start with the switch and checking all sockets. hope this helps.

Jan 20, 2010 | Chevrolet Citation Cars & Trucks

1 Answer

Taillights will not work, but turn sig, brakelights work, fuses are all good


Some makes and models have different taillight bulbs and brakelight bulbs. in other words your turn signals and brakelights are on one bulb and the tailights are on another, or they have multiple filaments and one of them could be bad

Aug 01, 2009 | 2002 Dodge Ram 3500 Truck

2 Answers

I have a 1974 Mazda B1600, The tailights do not work but the turn signals do. The bulbs are good


..check the fuse...and checked also the grounding..also..try checking the switch to make it turn on..sometimes..it may loose contact...
..if things does'nt work out..better a qualified auto-electrician check it...hope this help a little

Jul 09, 2009 | Mazda B-Series Cars & Trucks

1 Answer

How do i replace the turn signal on the taillight of a 2005 buick lesabre


unscrew tailight from inside trunk. Pull out and replace bulb. Read owners manual.

Jun 14, 2009 | 2005 Buick LeSabre

1 Answer

Tailights only work on directional and brakes ,no running lights


Usely dash lights and taillights are on the same fuse, if you don't have dash lights you won't have tailights. If you got dash lights than you could have blown bulbs or maybe a bad headlight switch.

Mar 20, 2009 | 1987 Jeep Wrangler

Not finding what you are looking for?
2001 Jeep Grand Cherokee Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...