Question about 2008 Dodge Grand Caravan

Open Question

Where is the neutral safety switch on 2008 grand caravan

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
roniecon
  • 6826 Answers

SOURCE: need to know how to replace neutral safety switch

Unppug it,and use a socket,and remove it,then instal in the reverse order.

Posted on Apr 14, 2010

Ad
  • 6982 Answers

SOURCE: Where is the neutral safety switch?

IF you have a chrysler 727 trans it's on the left rear corner of the case just above the trans pan (has 3 wires on it) If you have an asi trans, I'm not sure where they put it but I'd look around the linkage going into unit and on the other side (like jeeps have)

Posted on Feb 25, 2009

chryslertech
  • 115 Answers

SOURCE: Location of NSS(neutral safety switch) on 2002 Dodge Caravan

It is in side the trans on top of the valve body. Why do you think you need to replace it?

Posted on Mar 03, 2009

  • 436 Answers

SOURCE: removal and installation neutral safety switch,

the switch just threads in so all you have to do is unplug switch, turn counterclockwise till it is out and then thread new one in clockwise till it is tight, plug in harness and you are done.

Posted on Aug 30, 2009

Molson02536
  • 3854 Answers

SOURCE: compressing the rear disc brake caliper on 2008 grand caravan

The rear calipers on these models require a special tool that compresses and turns the piston in at the same time -- most parts stores carry this tool.

It is called a caliper piston press -- and it installs where the pads would go and acts like a c-clamp,when turning handle it will turn the caliper piston backinto the caliper as it compresses it.
Anytime the brake rotor or brake pads are being replaced, the rear caliper piston must be seated (bottomed) to compensate for the new brake rotor or lining. Because the Parking Brake self-adjuster mechanism is attached to the piston, a special seating method is required. The only acceptable method is by rotating the piston back into the bore using Retractor,MILLER Special Tool 8807, . Any other seating method will damage the self-adjuster mechanism.
Good luck and hope this helps.

Posted on Mar 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 dodge grand caravan dashboard reads reverse but gear is in park will not start, took positive and negative term off. Took out the fuses for the ingition switch and battery. Pulled on the gear under...


Maybe something wrong with neutral switch? Usually it is on or close to transaxle shift lever, follow the shift cable to shift lever, the switch has multiple wire connector.
It may be possible to start vehicle by jumping the load side of starter relay, key on. There are safety issues trying this, the vehicle will crank in any gear. Make sure tranny is out of gear, parking brake is set, block the wheels, whatever it takes to be safe, safety is your responsibility.
If the problem isn't that neutral switch, then I don't know? Any applicable trouble codes?

Jul 09, 2017 | 2001 Dodge Caravan

1 Answer

Car starts in neutral not in park


I would look at the operation and/or adjustment of the gear selector and the transmission range sensor (often mistakenly referred to as a 'neutral safety switch").

I say adjustment because the Neutral gate is mid-range of the selector, while the Park gate is at one end of the range. Thus, if the selector mechanism and the sensor position are not properly aligned, the sensor amy more accurately report the Neutral gate than the Park gate, resulting in cranking in the Neutral position but not while in Park.

Do you sometimes have to wiggle the shifter in Neutral to get it to crank?

Oct 04, 2012 | Dodge Cars & Trucks

1 Answer

Where is neutral switch on a 92 dodge caravan


Safety Switch Most neutral safety switches are combinations of a neutral safety switch and a backup lamp switch. Others have separate units for these two distinct functions. When the reverse light switch is not part of the neutral safety switch, it seldom needs adjustment, as it is directly activated by the transmission or the gear selector linkage.
f_ttat_t3.20.jpg Typical location of a neutral safety switch on a transaxle. Reprinted with permission of Ford Motor Company. A neutral safety switch allows current to pass from the starter switch to the starter when the lever is placed in the P or N position. Some neutral safety switches are nonadjustable. If these prevent starting in the P or N position and the gear selector linkage is correctly adjusted, they should be replaced.
To adjust a typical neutral safety switch:
  • Place the shift lever in neutral.
  • Loosen the attaching bolts for the switch.
  • Using the angling pin, move the switch until the pin falls into the hole in its rotor.
  • Tighten the attaching bolts.
  • Recheck the switch for continuity. If no voltage is present, replace the switch.
  • The switch sometimes controls the operation of the back-up lights also. With the engine off and the key on, put the selector in reverse position. Check the back-up lights to see that they are on. Then, check in the drive position to see that they are out.

May 10, 2012 | 1992 Dodge Caravan

1 Answer

2004 dodge grand caravan, will not roll over at all, shift indicator light says it is in reverse, will not register park or neutral.


The mode switch(neutral safety) in the transmission is bad,This will require valve body removal and draining of the transmission.Will walk you through it if you want to try.

Mar 28, 2011 | 2004 Dodge Grand Caravan

1 Answer

No back up lights on 2002 dodge caravan


Sounds like the neutral safety switch.

Jan 28, 2010 | 2002 Dodge Grand Caravan

1 Answer

Removal and installation neutral safety switch, 1998 dodge caravan 3.8l 4-speed aod.candyapple red


the switch just threads in so all you have to do is unplug switch, turn counterclockwise till it is out and then thread new one in clockwise till it is tight, plug in harness and you are done.

Aug 30, 2009 | 1998 Dodge Grand Caravan

Not finding what you are looking for?
2008 Dodge Grand Caravan Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...