Question about 1999 Chrysler 300M
Replace radiator 2007 chrysler 300
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Is it losing coolant? If yes posible weep hole on the water pumpAre the radiator fans switching on? The constantant control module (or similar nomenclature) may not be telling them to come on.
It's a dumb question, but...are you sure that when you replaced the T-stat you put it in right side up? Spring side toward the engine and you can see the triangular shaped arch before you put the cover on. Fixed that probably a dozen or more times. Those are the inexpensive do it your self fixes.If these don't work or apply. Check and see if the cooling system holds pressure. You can get a loaner at any chain autoparts store.or take your car to the shop and pay fifty or a hundred bucks for the diagnosis.
Posted on May 02, 2009
yes. If the rack is not held ,when you try to turn the rod you could bend the rack.With the pin out it doesn't take much to hold the rack,loosen the end with the rack "turned " so the rack is retracted into the housing,not sticking way out .
Posted on Aug 21, 2009
Testimonial: "Thanks a bunch"
With out being able to see it sounds like you have a misadjusted or broken park lock cable. there is a cable that locks shifter in park unless Brake pedal is depressed. So if you are pressing the brake and can not shift into a gear. that would be the first place I would check
Posted on Oct 15, 2009
if it is one in the rear light assembly you open your trunk and plull the carpet away from that lens,there will be four or five plastic finger nuts that you remove,then pull the assembly out and replace your bulb
Posted on Jan 21, 2010
Tips for a great answer:
Apr 22, 2015 | Chrysler 300C Cars & Trucks
Oct 31, 2013 | 2005 Chrysler 300 Hemi
Jan 18, 2013 | Chrysler Cars & Trucks
Feb 03, 2012 | 2007 Chrysler 300c AWD Sedan New Cars
Jun 12, 2010 | 2007 Chrysler 300c AWD Sedan New Cars
Oct 22, 2008 | 2007 Chrysler 300c AWD Sedan New Cars
Jan 09, 2017 | 1999 Chrysler 300M
341 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: