Question about 1987 Chevrolet Monte Carlo

Open Question

Change water pump on 87 monte carlo ls - 1987 Chevrolet Monte Carlo

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: water pump

On the 3.4.... Drain coolant, remove drive belt guard, loosen pulley bolts, remove drive belt, remove pulley, remove water pump. Good idea to check the belt for cracks or wear when doing the pump replacement. Reverse the procedure to install.

Posted on Feb 24, 2009

  • 135 Answers

SOURCE: 2000 monte carlo how to replace water pump.last bolt

there should be holes in power steering pump pulley that when positioned correctly the bole should go through one of those holes, if not then you have to remove the pump

Posted on Apr 29, 2009

  • 141 Answers

SOURCE: remove the power steering pump pulley on a 2003 monte carlo

you can either remove the steering pump to gain access,if there is no holes in PS pump pulley,you can rent a pulley puller....can be a ***** to get in and use them though....I will drill a hole in it for next time whenever I replace a pump on cars without ....

Posted on Aug 09, 2009

  • 34 Answers

SOURCE: how do you remove the water pump on a 2006 monte

  1. Drain the cooling system. Refer to Draining and Filling Cooling System (LS4 Static Fill) Draining and Filling Cooling System (LZE, LZ4, LZ9 Static Fill) Draining and Filling Cooling System (9C1, 9C3 Static Fill) Draining and Filling Cooling System (LS4 GE 47716 Fill) Draining and Filling Cooling System (LZE, LZ4, LZ9, 9C1, 9C3 GE 4771 Fill).
  2. Loosen the water pump pulley bolts.
  3. Remove the drive belt.
  4. Remove the water pump pulley bolts and pulley.
  5. Remove the water pump bolts.
  6. Remove the water pump and gasket.
  7. Clean the water pump mating surfaces
    1. Position a NEW water pump gasket and the water pump to the engine front cover. Notice: Refer to Fastener Notice.
    2. Install the water pump bolts. Tighten the bolts to 10 Nm (89 inch lbs.) .
  1. Install the water pump pulley and bolts.
  2. Install the drive belt.
  3. Tighten the water pump pulley bolts. Tighten the bolts to 25 Nm (18 ft. lbs.) .
  4. Fill the cooling system. Refer to Draining and Filling Cooling System (LS4 Static Fill) Draining and Filling Cooling System (LZE, LZ4, LZ9 Static Fill) Draining and Filling Cooling System (9C1, 9C3 Static Fill) Draining and Filling Cooling System (LS4 GE 47716 Fill) Draining and Filling Cooling System (LZE, LZ4, LZ9, 9C1, 9C3 GE 4771 Fill).
  5. Inspect for leaks.
Hope this helps

Posted on Oct 01, 2009

carfreakt
  • 68 Answers

SOURCE: need to replace water pump 2004 Chev Monte Carlo

ok take the belt off take the hose off the pump catch the antifreeze take the bolts off the pump clean off the old gasket off the engine and install new pump and gasket reinstall hoses and bolts anrefill with anti freeze and reinstall belt start it and make sure it does not leak
good luck

Posted on Oct 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can i change the front end on my 86 monte carlo ls to a ss???


I can't see it being a problem. SS was basically just an option on a platform for all Monte Carlos.Everything from an SS should bolt on or in, depending on how far you go with it. Hope this helps.

Oct 04, 2009 | 1986 Chevrolet Monte Carlo

1 Answer

How do i replace the oil pump on an 87 monte carlo ss


If you need to ask, likely you would benefit from the instructions found in either haynes or chilton manuals...Depending upon which engine you have , instructions vary...all v8 engines have the pump located inside the pan. Some other GM engines have it inside the timing case cover. Instructions are not difficult but far too long to write here.
One important note...Unless the oil pump pickup is obstructed with hard carbon etc, Your problem is very likely the rod or main bearings, not the pump, though if the bearings are worn you should change the pump as well.

Jun 27, 2009 | 1987 Chevrolet Monte Carlo

1 Answer

2000 monte carlo how to replace water pump.last bolt


there should be holes in power steering pump pulley that when positioned correctly the bole should go through one of those holes, if not then you have to remove the pump

Apr 29, 2009 | 2004 Chevrolet Monte Carlo

1 Answer

Monte carlo


you might check the crank and cam sensors

Jan 29, 2009 | 2004 Chevrolet Monte Carlo

2 Answers

1999 monte carlo LS won't stay running


yes it the fuel pump . the float is getting stuck

Dec 13, 2008 | 1999 Chevrolet Monte Carlo

Not finding what you are looking for?
1987 Chevrolet Monte Carlo Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...