Question about Citroen Xantia
Hi there, Since I bought the car a few years back the controls for the audio on the steering wheel aren't working, I have checked all the fuses all though there appears to be no separate fuse for the steering wheel control only one for the radio itself, by any chance is there a relay that controls the power to and from the steering wheel control unit I have already checked the connections on the back of the radio and the back of the steering wheel any help appreciated
It sounds as thogh the radio isnt the oe one and is not paired the remote is controled by the unit it may be a broken wire
Posted on Jan 25, 2013
Also, you can check, if the steering wheel controls give the signal, by this diagram:
Depending on the Xantia model, but the one in the diagram is for the model, that has 3 leads coming from the steering wheel. So check with the meter, if the resistance between the [GND] and [+5 V] is changing, when you use the controls on the steering wheel.
Posted on Jan 02, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Control unit (with MANY wires) is inside trunk on right side and there is a fuse box with 3 fuses at the "REAR"...assume trunk again...I have schematic only...remove the Control unit wire connectors and re-insert them to polish the contacts...
Posted on Jul 04, 2008
this problem is caused by the rotating contact under the steering wheel that connects the horn (and airbag) button to the steering column wiring harness, this contact is commonly called the clock-spring ribbon contact. WARNING! Before u replace this u must remove the wheel and the airbag module on the wheel, the airbag must be disarmed, the easiest way is to disconnect the battery 30 minutes prior to starting work, this always ample time for the system control circuit capacitors to drain down.
Posted on Jan 23, 2009
you probably didnt change the right fuse and had another one blown at the same time you also could have a primary fuse under the hood that blew. once fixed dont use pump again. not same amps drawn
Posted on May 06, 2009
Tips for a great answer:
Sep 06, 2016 | Citroen Cars & Trucks
Jan 16, 2015 | 1998 Citroen Xantia
Jul 02, 2014 | 1998 Citroen Xantia Break
Feb 05, 2014 | Citroen Xantia Cars & Trucks
Oct 24, 2012 | Citroen Xantia Cars & Trucks
Sep 01, 2012 | 1998 Citroen Xantia
Aug 20, 2012 | 1998 Citroen Xantia
Mar 27, 2009 | 2005 Peugeot 405
Feb 27, 2009 | 1987 Peugeot Liberte
Sep 08, 2017 | Citroen Cars & Trucks
342 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: