Question about 2006 Ford Five Hundred

Open Question

Where is the oxygen sensor on a 2006 ford five hundred sel?

Trying to find where the oxygen sensors are located

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
alicantecoli
  • 22219 Answers

SOURCE: change oxygen sensor 2001 ford windstar

fist unclip wire,then unscrew it with a 28mm spanner ,fitting procedure is the reverse .It turns anticlockwise to unscrew and clockwise to screw up ,torque setting is a grunt and two scuffed knuckles and max of 3 swear words

Posted on Jan 01, 2009

Ad
  • 96 Answers

SOURCE: Where are both cam sensors on a 2006 ford five

The cam position sensors are located in front just below the valve covers. It's a 10 minute replacement, 20 if you do both which I would reccomend if you decide to replace. However, more often than not it's your alternator that's the problem. Your cam pos sensor will cause some surging due to a bad signal.

Posted on Aug 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oxygen sensor location


oxygen sensors have a connect close handy to the unit and that wire can be cut or damaged if the incorrect removal tool is used
look for a connecting hanging close by

Nov 23, 2015 | 2007 Chevrolet Chevrolet Silverado 1500

1 Answer

PO 134 bank 1 location


Bank 1 is located towards the driver's side. Sensor 1 is located upstream just below the exhaust manifold.
EOBD II Error Code: P0134
Description:
Oxygen Sensor (O2S) 1, Bank 1/Heated Oxygen Sensor (HO2S) 1, Bank 1 - No Activity Detected
Possible Causes:
- Wiring.
- Signal wire between the Heated Oxygen sensor and ECM is disconnected.
- Heated Oxygen Sensor defective.
- ECM.

Jul 04, 2014 | 1999 Hyundai Sonata

1 Answer

Where are the 02 sensors located on a chevy venture


I have written a couple articles that cover subjects including oxygen sensors, oxygen sensor codes, and oxygen sensor locations. I recommend that you read these articles before pending your money on trying to replace any oxygen sensors. Click the links below to see the articles.

What Else Could Be Wrong?

Which Oxygen Sensor Is It?

Apr 26, 2012 | 2003 Chevrolet Venture Passanger

3 Answers

I am trying to locate the Oxygen Sensor on my 2003 Impala?


Chevrolet Impala comes equipped with two oxygen sensors, one on either side of the catalytic converter. Locating the sensors is as simple as crawling under the vehicle.

  1. Location
    • The bank 1, sensor 2 oxygen sensor is located downstream of the catalytic converter. To get to the sensor, crawl underneath the vehicle and trace the exhaust pipe until you reach the catalytic converter. Continue to follow the exhaust pipe until you reach the bank 1, sensor 2 oxygen sensor.

    Identification
    • You should be able to identify the oxygen sensor as a single wire about 3 to 6 inches long. The oxygen sensor is mounted to the exhaust pipe and should slightly protrude from the pipe.

    Function
    • The oxygen sensor is an important part of the vehicle exhaust system. The sensor tests the amount of air in the exhaust stream. It then sends this information to the engine control computer, which determines how much fuel is necessary to maintain a proper air-to-fuel ratio.


If this free advice was helpful, a vote with the thumbs up would be greatly appreciated.
Thanks

Aug 25, 2011 | 2006 Chevrolet Impala

1 Answer

I need a diagram of the exhaust system on a Mazda 626


0996b43f80203328.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Component Location Chart-2000 MPV

1 PCM 2 Mass air flow (MAF)/intake air temperature (IAT) sensor 3 Throttle position (TP) sensor 4 Fuel tank pressure sensor 5 Engine coolant temperature (ECT) sensor 6 Crankshaft position (CKP) sensor 7 Camshaft position (CMP) sensor 8 Knock sensor 9 Heated oxygen sensor (HO2S) (front, LH) 10 Heated oxygen sensor (HO2S) (front, RH) 11 Heated oxygen sensor (HO2S) (rear, LH) 12 Heated oxygen sensor (HO2S) (rear, RH) 13 EGR boost sensor 14 Power steering pressure (PSP) switch 15 Main relay


0996b43f8020330c.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Component Location Chart-2001 MPV

1 PCM 2 Mass air flow (MAF)/Intake air temperature (IAT) sensor 3 Throttle position (TP) sensor 4 Engine coolant temperature (ECT) sensor 5 Crankshaft position (CKP) sensor 6 Camshaft position (CMP) sensor 7 Knock sensor 8 Heated oxygen sensor (HO2S) (front, LH) 9 Heated oxygen sensor (HO2S) (front, RH) 10 Heated oxygen sensor (HO2S) (rear, LH)* 11 Heated oxygen sensor (HO2S) (rear, RH)* 12 EGR boost sensor


0996b43f8020330f.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Component Location Chart- 2002-06 MPV

May 22, 2010 | 2004 Mazda MPV

2 Answers

2001 Olds Alero oxygen sensor bank 1 P0135


p0135 indicates bank 1 sensor 1 which is before the cat.

May 22, 2010 | 2001 Oldsmobile Alero

2 Answers

Where is the O2 sensor located on the 2003 V6 All Wheel Santa Fe and how dificult is it to replace?


Hyundai Santa Fe 2001-05
Heated Oxygen Sensor (H02S): The sensors are located in the exhaust system. On some vehicles, one sensor is located up at the exhaust manifold(s) and the other sensor is located down at the catalytic converter. On other vehicles, both sensors are located down at the catalytic converter.

d2217fa.jpg

How to Replace an Oxygen Sensor
Parts:
1. Oxygen Sensor
2. Oxygen Sensor

Tools:
1. 3/8 in. Drive Ratchet
2. Multimeter
3. Oxygen Sensor Socket
4. Combination Wrench Set
5. Crimp Tool
6. Socket Set
7. Scan Tool

Steps:
Step 1 * Park the vehicle on a level surface. Set the parking brake and open the hood.
o Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.
o Tip: Always make sure the struts on the hood can fully support the weight of the hood so that it does not close on you while working. The use of a hood prop can securely hold it in place.

Step 2 * With the engine off and cool, locate the defective oxygen sensor in the exhaust manifold or pipe. If necessary, lift the front of the vehicle and support it with jack stands.
o Tip: Most vehicles have multiple oxygen sensors. How many sensors, depends on the model year and type of engine.

Step 3 * Disconnect the wire connector at the defective oxygen sensor.

Step 4 * Remove the oxygen sensor from the exhaust system.

Step 5 * If you are installing a universal oxygen sensor, cut off the connector from the original sensor and splice the connector wires to the new oxygen sensor. Follow the manufacturer’s instructions supplied with the sensor.

Step 6 * For threaded oxygen sensors, apply anti-seize compound to the threads and install the new sensor.

Step 7 * For flange mounted oxygen sensors, install a new gasket and tighten the mounting bolts.

Step 8 * Reattach the wire connector from the sensor.

Step 9 * If necessary, connect the OBD I/II scanner and erase the fault code.

Hope help with this (remember rated and commented this help) Good luck.

Mar 01, 2010 | 2003 Hyundai Santa Fe

3 Answers

Were on exaust is oxygen sensor in 1999 subaru impreza auto sport


On the SOHC engine the front (A/F) oxygen sensor is located in the front section of the front catalytic converter. The rear oxygen sensor is located in the rear section of the front catalytic converter. On the DOHC engine the front oxygen sensor is located in the front section of the exhaust system, just past the crossover pipe. The rear oxygen sensor is located in the front section of the catalytic converter.

Oxygen sensor location-Baja 2.5L SOHC engine
c3fce0b.jpg

Oxygen sensor location-Baja 2.5L DOHC engine
7aac75e.jpg


On the 2.0L engine the front (A/F) oxygen sensor is located in the front section of the exhaust system, just past the crossover pipe. The rear oxygen sensor is located in the front section of the rear catalytic converter. On the 2.2L engine the front (A/F) oxygen sensor is located in the front section of the front catalytic converter. The rear oxygen sensor is located in the rear section of the rear catalytic converter.

Oxygen sensor location-Impreza 1998-2001 2.2L engine
a5973e4.jpg


moz-screenshot.pngOxygen sensor location-Impreza 1998-2002 2.5L SOHC engine
3a84717.jpg
I hope helped with this; remember rated this help. Good luck.

Nov 20, 2009 | 1999 Subaru Impreza

2 Answers

How many oxygen sensors in a 2001 chrysler sebring 3.0


17c3292.jpg

Fig. Heated Oxygen (HO2S) location (sensor 1)-2.4L engine

db6f426.jpg

Fig. Heated Oxygen (HO2S) location (sensor 2)-2.4L engine

99e413c.jpg

Fig. Heated Oxygen (HO2S) location (bank 1, sensor 2) (bank 2, sensor 2)-2.7L engine

e2a250f.jpg

Fig. Heated Oxygen (HO2S) location (bank 2, sensor 1)-2.7L engine

I hope help you with this (rated this help). Good luck.

Sep 09, 2009 | 2001 Chrysler Sebring

1 Answer

O2 Sensor on a 1996 Cadillac Eldorado


Hello mrsalbert, my name is JShreader. Thank you for choosing fixya.com

Depending on which oxygen sensor you are looking for...there are several of them throughout the Exhaust System. I will start out by giving you a brief description of what and oxygen sensor is, and they're general purpose.

DESCRIPTION
Four Heated Oxygen Sensors (HO2S) are mounted in the exhaust system where they monitor the oxygen content in the exhaust stream. There is an oxygen sensor mounted in each exhaust manifold and one on each end of the catalytic converter. the oxygen sensor located in the front exhaust manifold is the Bank 2 Sensor 1 (Front) sensor. The oxygen sensor located in the rear exhaust manifold is the Bank 1 Sensor 1 (Rear) sensor. The oxygen sensor located in the Y-pipe ahead of the catalytic converter is the Bank 1 Sensor 2 (Pre-converter) sensor. The oxygen sensor located in the catalytic converter outlet is the Bank 1 Sensor 3 (Post-converter) sensor.

OPERATION
An oxygen sensor acts like a battery because it creates its own signal voltage once it reaches operating temperature. This voltage is produced when the oxygen content in the exhaust stream is different than the oxygen content in the atmosphere. A lean condition (high oxygen content in exhaust) will produce a low voltage (near 0 volts) and a rich condition (low oxygen content in exhaust) will produce a high voltage (near one volt). The PCM provides a reference signal voltage (0.45 volt) and a ground to the sensor. The PCM reference voltage is necessary because the oxygen sensors do not provide their own voltage until they reach operating temperature.

HEATING ELEMENT
the oxygen sensors also incorporate a heating element inside of the sensor housing. This heating element is energized with the ignition On and allows the sensors to reach operating temperatures quickly. The PCM can then use oxygen sensor information sooner after engine start-up.

PCM INPUTS
The PCM uses oxygen sensor information during Closed Loop operation to constantly adjust fuel control to reduce exhaust emissions. Because the oxygen sensors provide information sooner after engine start-up, exhaust emissions are reduced. Faulty oxygen sensors will cause various driveability conditions and will set a DTC.

That being said...I uploaded a .pdf for you of pictures showing the locations of ALL the oxygen Sensors on your Vehicle. You can download it by clicking HERE.

I hope this helps you. If you have any more questions or need any more diagrams, please don't hesitate to ask...Thanks again, JShreader!

Apr 01, 2009 | 1996 Cadillac Eldorado

Not finding what you are looking for?
2006 Ford Five Hundred Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...