Question about 1991 Dodge Daytona

Open Question

How to replace valve cover gaskets on hyundai elantra 2001

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bryant329
  • 125 Answers

SOURCE: how to replace valve cover gasket on a 2002 stratus 3.0 liter engine

i don't know that vehicle very well... but there are usually bolts/screws that hold them in place. 4 to 6 of them per cover. sometimes the spark plug holes have giant nuts that hold the cover in place.

Posted on Sep 22, 2008

leetamara
  • 702 Answers

SOURCE: 89 Dodge Raider 3.0 Labor hours to replace Valve cover Gaskets and seals

.5 for the 4 cyl. and its 3.6 for the 6 cyl. engine. This is according to the Chilton Labor Guide.

Posted on Nov 10, 2008

  • 512 Answers

SOURCE: repair rear valve cover gasket on 2001Dodge Caravan 3.3

the only way to replace the rear valve cover is to remove the upper intake....there is no easy way

Posted on Dec 31, 2008

landsend
  • 1066 Answers

SOURCE: changing valve cover gasket on 2001 dodge stratus, how

remove all the components in the way of the valve cover.  Then remove the valve cover and replace the gasket and reassemble.
usually about a 3 to 4 hour job.

Posted on Mar 23, 2009

c17hydro
  • 2984 Answers

SOURCE: leaking valve cover gaskets

The problem is over tightening.

If you over tighten your fastners you will sqeeze your gaskets too much and they WILL leak.

You can use black silicon sealant LIGHTLY but you don't really need it. If you have the V6...the torque on them nuts are only 80 in lbs each

Posted on Mar 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil leaking from the top of spark plug socket where the spark plug wire connects


You need to replace the valve cover gaskets and valve cover spark plug well seals.

Sep 09, 2013 | 2001 Hyundai Elantra

Tip

Stalling and running rough - Hyundai Elantra - 2001-05


The Hyundai Elantra 2001 - 2005, 2.0 L engine is noted for this problem. It will lack power on acceleration and run rough and stall while driving. The engine light will come on for misfire codes. This problem is caused by a vaccum leak at the intake manifold gasket. The gasket is broken and needs to be replaced.
To replace the intake gasket with a new one, remove the 12m nuts holding the intake to the cylinder head. Then pry back( note: you do not have to completely remove the intake manifold here) the intake manifold to gain excess to remove the old gasket. Remove any excess gasket and clean with brake cleans the surface area of the intake. Install the new intake gasket on to the head and carefully install intake on to cylinder head studs. Tighten up nuts gradually and evenly to 15-20 ft.lbs.

Steve

on Jan 14, 2010 | Hyundai Elantra Cars & Trucks

1 Answer

Oil coming out of spark plug socket


May need new valve cover gasket and plug well seals as oil may be escaping and getting to spark plugs.

Sep 09, 2013 | 2001 Hyundai Elantra

1 Answer

Pcv valve


PCV valve would be the first thing to check.

Sep 05, 2012 | 2001 Hyundai Elantra

1 Answer

How do you replace a 2001 Hyundai Elantra thermostat?


Remove the air cleaner. Drain coolant. Standing in front of the vehicle, the right side of the engie (across from the air cleaner) you'll see a black cover attached to the side of the upper engine. Slowly pull off (its attached with plastic snaps-just pull). Where the black cover attached you should see 2 nuts securing the thermostat housing. Remove nuts and washers, and thermostat housing (I believe they're 12mm). Remove thermostat and gasket. Install thermostat first the same way it was removed. Install gasket (may need to use gasket sealer to hold it in place). Install washers and nuts and hane tighten then 1/8-1/4 turn.

Aug 30, 2011 | 2001 Hyundai Elantra

1 Answer

Can't get valve cover off to replace the PVC valve.


RECHECK MAKE SURE ALL VALVE COVER BOLTS BEEN REMOVED. LOOK AT THE NEW VALVE COVER GASKET COUNT BOLT HOLES IN NEW GASKET IF YOU COUNT SAME AMOUNT BOLT HAS BEEN REMOVED. VALVE COVER STUCK TAKE A RUBBER HAMMER TAP VALVE COVER TO BREAK THE SEAL.DONT PRY VALVE COVER YOU WILL DAMAGE VALVE COVER AND SEAL SURFACE CAUSING YOU TO GET A OIL LEAK.

Aug 09, 2011 | 2008 Hyundai Elantra

1 Answer

I have a 1995 Hyundai elantra 5 spd 1.6L 4cyl leaking oil


It maybe a valve cover leak, the retangular covers (2) the sparks plugs are located along the side, if you see oil around you will need to have the valve cover gasket replaced

Oct 28, 2009 | 1995 Hyundai Elantra

1 Answer

Smoke from my engine/ 2001 Hyundai Accent


valve cover gasket is leaking replace

Jul 01, 2009 | 2001 Hyundai Accent

1 Answer

Car shuts off


most likely an intake gasket.. with engine running spray brake or carb cleaner along intake and the head if rpms increase replace the intake gasket

Apr 01, 2009 | 2001 Hyundai Elantra

1 Answer

How to the replace the head cover gasket on 2001 hyundai elantra


Check this link, shouldn't be too bad.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528019703d

Dec 22, 2008 | 2001 Hyundai Elantra

Not finding what you are looking for?
1991 Dodge Daytona Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...