Question about 1996 Chevrolet Lumina Mini

1 Answer

I got a problem with my ignition switch. I dont know how to change it

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 61 Answers

Their is a specal tool you have to get to remove the steering wheel. Then their is a turn signal switch that has to be removed with 3 or 4 screws. this is behind the steering wheel inside the column. After that their is the ignition switch one serew is holding that. remove it and their is a bar that goes in to the end of it, remove this and the ignition switch should fall out.


Please contact me if your problem presists.

Thanks, Charlie

Posted on Feb 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to drill out frozen Ignition cylinder


Get the ignition switch first so you will know your depth, you dont need to drill it out, Do this first, at the ignition switch you have that cover the wood looking thing, remove that,Turn the lock to position 1 then press into the middle cylinder from there it will unlock at pry it out. To install you need the key to remove you dont need a key, so dont drill

Mar 10, 2012 | 1992 Mercedes-Benz Mercedes Benz 400 Class

1 Answer

I have a 2001 saturn sc1 (3) door i need a new ignition and key anyone know where i can get one asap autozone said they dont have them and cant even order them please help


SATURN DEALERSHIP HAS NEW IGNITION SWITCH OR KEYS. MOST AUTO PARTS STORES DONT SALE KEYS AND IGNITION SWITCH FOR NEWER VECHICLES THAT HAS THE PASSLOCK IGNITION SYSTEM.

Sep 11, 2011 | 2001 Saturn SC

1 Answer

Which screwa to remove from bottom of sterring column when changing out an ignition switch


YOU HAVE TO REMOVE THE STEERING WHEEL TO REMOVE IGNITION SWITCH YOU HAVE TO REMOVE IGNITION SWITCH INSIDE THE STEERING COLUMN.YOU NEED A STEERING WHEEL PULLER AND A LOCK PLATE TOOL TO COMPRESS LOCK PLATE TO REMOVE THE LOCK PLATE RETAINING RING.DONT KNOW WHAT YEAR VECHICLE YOU HAVE.BUT DUE TO AIRBAGS MAKE SURE YOUR VECHICLE FRONT WHEELS POINTING STRAIGHT AHEAD.TURN OFF RADIO TO KEEP FROM LOCKING IT OUT.REMOVE NEGATIVE BATTERY CABLE WAIT 20 MINUTES BEFORE REMOVING STEERING WHEEL AIRBAG.DISCONNECT AIRBAG ELECTRICAL CONNECTOR.WHEN REMOVING AIRBAG CARRY AWAY FROM BODY CAREFULLY LAY AIRBAG FACING UP PUT SOMEWHERE SAFE FROM CHILDRENS AND PETS. YOU NEED A HAYNES REPAIR MANUAL TO LOOK AT AIRBAG CLOCKSPRING MAKE SURE IT CENTER.BEFORE REMOVING OR CLOCKSPRING WILL BE DAMAGED.IF YOUR TRUCK OR CAR DONT HAVE AIRBAGS NO NEED TO WORRY ABOUT THE AIRBAG REMOVING PROCEDURES. YOU JUST NEED TO REMOVE THE STEERING WHEEL.

Oct 24, 2010 | Chevrolet C3500 Cars & Trucks

3 Answers

Reset immobiliser


u must put a key to ignition and open a drive door 3 times and press and hold lock button

Jan 18, 2010 | 2007 Ford F

1 Answer

Change starter on 2002 tahoe now motor wont start


If you had battery unhooked and assuming that it is turning over try this Put your key in turn it on dont start wait 10 mins remove key wait 10 seconds repeat this a total of 3 times. If that dont work try a different key do the same thing. This relearns your key to the ignition it started with Gm cars and trucks from 1999 to to 2006. It is a big problem but there is no recall that I know of. If that dont work a dealer needs to probably replace and reprogram your ignition switch and keys

Dec 27, 2009 | 2002 Chevrolet Tahoe

1 Answer

Does not go in gear, we just changed key switch, tumbler fell,


I Have The Full Manual And Own This Car You Can Override It Not Switching Gears. There Is A Little Square Next To The Shifting Lever Pop That Out And Push The Button While Shifting This Will Get It In Gear. But Please Explain Your Problem More. Are You Saying The Ignition Wont Work And You Just Changed The Ignition?
Sincerely,
Michael Scott

Jul 24, 2009 | 1998 Toyota Camry

1 Answer

95 bonneville the ignition switch locked up completely so i changed the cylinder on it and when i almost had it back together i noticed that the key wasnt going all the way back to the lock position but it...


The item at the end of the rod is the ignition switch. what you changed was the lock assembly. (you turn the key, it moves the rod and puts the switch in the correct position to do what you want it to)

Jun 08, 2009 | 1995 Pontiac Bonneville

Not finding what you are looking for?
1996 Chevrolet Lumina Mini Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...