Ck engine light on with po446
SOURCE: check engin soon light comes on 3.1engin buick regal 1995
i had auto zone check the computer and was told i needed two sensor and i like know where they are located and if i can installed them my self thank you beepa1
SOURCE: how to replace a crank sensor on a 93 buick regal 3.8L engine
Im assuming this is the Series I 3800? If so, if you can email me I can send you some directions on the process. Its for a Series II 3800 but it should be similar. If you cant email me, post up and I'll see what I can do.
SOURCE: my buick regal check engine light came on 1999
that tell u that something is wrong, get a scan tool an pull the code.
SOURCE: 1984 buick regal "service engine soon"
you need to find someone with an old type scan tool,or one that has an adapter for the older cars to read the codes. you can also do this by jumping 2 wires on tha obd connector and count the flashes. the first suggestion is the best. get the code and get back to me and we'll go from there. hope this helps Thanks Ray
SOURCE: emission control system malfunction code po446
Code p0446 is for EVAP vent valve performance. Unfortionly there isn't just one item that can cause this code and the test require the use of a scanner. You can do a visual check but other then that with out scanner its just going to be replace and hope. That could wind up being exspensive.
Testimonial: "where is the evap control module located?"
111 views
Usually answered in minutes!
×