Question about Dodge Cars & Trucks

Open Question

2009 dodge caravan wont crank dtc p0706 - Dodge Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 39 Answers

SOURCE: 1997 Dodge caravan crank position sensor

it is located on the bellhousing of the transmission it gets its signal from the flywheel.look where the transmission bolts to the engine.

Posted on Sep 25, 2008

Ad
  • 231 Answers

SOURCE: DTC's 1998 Dodge Caravan

system to rich on bank 1

Posted on Oct 19, 2008

  • 1 Answer

SOURCE: Have P0406 DTC code for 2006 Dodge caravan. Need

it should be the egr valve (exhaust gas reserculatin)

Posted on Sep 10, 2009

  • 1986 Answers

SOURCE: OBD/DTC '03 Dodge Grand Caravan 3.3L A604 Trans.

P0134 - bad O2 sensor, faulty wiring, blown heater circuit fuse, holes in exhaust, failed PCM

P1684 - Battery Disconnected Within Last 50 Starts

Posted on Sep 11, 2009

  • 18 Answers

SOURCE: i have a 2004 chev. pu with a dtc of p0706 what do

replace your trans range sensor or {trs}

Posted on Oct 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001Dodge caravan 3.8L engine cranks but won't start, and dash lights and gauges go wacky


05 Dodge Caravan No Start P0688 bad wire - YouTube

? 10:49
www.youtube.com/watch?v=yshodC_crqo
Sep 22, 2012 - Uploaded by Brian Mann 2005 dodge caravan crank no start p0688 asd relay circuit ... butdoing the voltage drop on the back of the connector to the ipm to.... ECM PCM STARTER 2003 DODGE GRAND CARAVAN 3.3L V6 WONT START ... 1996, 97, 98 Dodge Caravan Starter install3.8L V6 - Duration: 8:39. by Gary O 4,364 views.

Sep 12, 2015 | Cars & Trucks

1 Answer

2005 dodge grand caravan wont start it cranka over


Hate to tell you but most likely your timing chain either broke or slipped, it could be cam or crank or both sensor

Oct 20, 2014 | 2005 Dodge Grand Caravan

1 Answer

New crank sensor wont fit in my 3.3 liter dodge engine


If the part looks identical and has a rubber o ring on it try put some rubber grease on the o ring. If it's not a genuine part there are sometimes groves that sit up proud on the sides which can stop it going in the hole I've shaved them down before

Apr 05, 2014 | 2009 Dodge Grand Caravan

1 Answer

P0706


the code is for a malfunctioning shift control or range switch basically tells the vehicle what gear it is in... these sometimes corrode up and cause this dtc to be set semi common for the mdx .

Jan 27, 2014 | 2002 Acura MDX

1 Answer

2009 dodge grand caravan error message on dash board no bus or no bu5


the info bus is down try unpluggin the crank sensor on the right side of the transmission see if no bus goes away al see computer cause this issue

Nov 20, 2013 | 2009 Dodge Grand Caravan

2 Answers

2009 dodge caravan battery light wont tun off new battery and generator


check your fuses, if they are all good try another alternator.

Feb 22, 2013 | 2009 Dodge Grand Caravan

1 Answer

Front wheels lock when turning in my 2009 dodge grand caravan


there is a tbi on dodge caravan and grand caravan for the front and rear brakes locking up . it is a recall if you are under 60,000 miles

Nov 03, 2012 | 2009 Dodge Grand Caravan

4 Answers

My service engine light is on got it checked it has a p0706 code which is the Transmission Range Sensor Circuit Range/Performance?where do i find the part?


DTC P0708 - Transmission Range Sensor Circuit High Input

Check your transmission range sensor.
There is a connector located where the cable attaches to the tranny on the back (firewall side). Be sure its connected and seated properly.

From what I understand the "range sensor" is basically the Input Turbine Speed Sensor. Be sure the connector for this is also clean. This code is also set by the Nuetral Safety switch. Check the switch with a multi meter to be sure its working properly.

Also, check your Engine Coolant Temperature Sensor. This sensor is used by the PCM to help control tranny operations.

Also, can check this additional information for
1998 Saturn SL1...

DTC P0706
The PCM determines which gear is selected by a combination of opens and grounds in circuits 771, 772, and 773 at the transaxle park/neutral
position switch. Each combination indicates a specific selection on the
manual shift quadrant, P, R, N, D, 2, or 3. Circuit 776 is either open
or grounded to produce an even number of grounded circuits, 771, 772,
773, and 776. Invalid data indicates that the sum of the grounded
circuits 771, 772, 773, and 776, in 1 of the manual shift quadrants is
equal to an odd number.

Conditions for Setting the DTC
DTC P0706 is set when the PCM has detected an invalid bit pattern for
more than 3.5 seconds, twice per ignition cycle.

The difference between DTC P0706 and DTC P0705 is that a possible bit pattern error due to misadjustment could set a DTC P0706.

Test Description
1. This step verifies the conditions for DTC P0706 still exist.
2. If the shift cable or switch is misadjusted, a DTC P0706 may set
while in certain gear shift positions.
3. DTC P0706 may set due to 1 or more circuits being shorted to
ground. By disconnecting the switch, the PCM should read all circuits as high and the scan tool should display OPEN.
4. This step will isolate an open circuit. As each individual circuit
is grounded, the PCM/TCM should see the low signal and the tool should display INVALID.
5. The PCM/TCM supplies a 12 volt signal to each transaxle park/neutral position switch circuit. This step tests for that voltage.
6. DTC P0706 may have been set due to 1 of the circuits being shorted
to voltage. This step verifies if a short to voltage exists.

Repair Verification
Monitor DTC menu Code Status for Pass Since Code Clear and Pass This Ignition Cycle. When both have passed, the repair is verified.

Criteria for pass:
* No active DTC set.
* Two valid selector positions are decoded. You must move the
shifter to obtain a pass.

Diagnostic Aids
When the PCM detects a fault in the circuit, an open, ground, or short,
the PCM will open the circuit internally to protect the circuit.

If no circuit problems can be detected, check the shift cable and switch
adjustment.

Important
Refer to the chart from DTC P0705.

This DTC will cause the transaxle to start out in 2nd gear.

Hope helps (remember rated this).

Jun 18, 2010 | 1997 Saturn SL

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...