Question about 1995 Mazda Millenia

1 Answer

The lifters on my 95 mazda millenia are bad

How do i know which one is bad without takin tem all off and replacing all 24?

Posted by on

  • tiledoc3 Jan 12, 2009

    It's a v6 and i had to remove the intake to get to the valve cover.

    Thanks

    Daniel

  • Thomas F. Schneider May 11, 2010

    Their will be a gap between the valve end  and the thing that pushes it down. That is what makes the clattering noise. 

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 2,039 Answers

I you remove the valve cover if you move the rocker and some got more play then others they need to be removed first run the engine and try to hear were the noise come from let say you hear noise on the driver side so our problem is in those lifter good luck pierre

Posted on Jan 11, 2009

  • juliusmitche
    juliusmitche Apr 19, 2012

    I have a 2001 Mazda Millenia with a "ticking" noise, but its on the passenger side, does that mean I have a bad timing tensioner?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a bad ticking noise in the engine block. I think its one of my lifters. What can i do to fix this problem with out spending to much money . The car is a Mazda Millenia 2.5 L the year of the car is...


Try using higher grade gas. If that gets rid of it or reduces it, it's a detonation problem. Try running a few cans of seafoam motor treatment in the gas and a bit of miles before the next oil change.

Jan 12, 2011 | 2000 Mazda Millenia

1 Answer

I have a 2000 Mazda Millenia. It just stopped in


sounds like one of the parts they replaced is bad first thing to do is have it scanned to see what the check engine light is on for then let me know i would say bad wire or plug that was installed and what kind of plugs they put in it

Jan 07, 2010 | 2000 Mazda Millenia

1 Answer

MY MILLENIA 02 SUPERCHARGE HAS A KNOCK THAT SOUNDS LIKE THE LIFTERS DO THEY GO BAD OFTEN


they dont go often but infrequent oil changes extreme driving high mileage can increase the wear and possible break down of parts lifters like any other mechanical part can break or wear out

Nov 11, 2009 | 2002 Mazda Millenia

1 Answer

Doesnt start, just hear electrical


Distributor may be broken. I'm no expert but I have some experience with millenias. What else can you tell me about the car?

May 21, 2009 | 1997 Mazda Millenia

1 Answer

Check engine light


yes the sensor and it will not go away on Mazda Millenia even though you replace that code it will show another one Mazda Millenia Sucks & Mazda Parts are Expensive too

Jan 15, 2009 | 1998 Mazda Millenia

1 Answer

The lifters on my 95 mazda millenia are bad..is there a way that i can tell which one specifically is bad?


By using a Feeler guage and measuring valve clearance. Good Luck and thanks for using FIX YA

Jan 11, 2009 | 1999 Mazda Millenia

1 Answer

Retrieve codes


no. It is an OBD2 configured control system.First year production with a lot of fuel trim problems. codes can be retrieved with generic obd2 scan tools or ford's star2 tester. These cars are noted for setting oxygen senser codes if started with battery in poor contition.

May 15, 2008 | 1995 Mazda Millenia

Not finding what you are looking for?
1995 Mazda Millenia Logo

Related Topics:

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...