Question about Cars & Trucks

Open Question

1997 honda city timing belt marks

How to find timing marks for honda city 1997

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 36 Answers

SOURCE: 1997 Honda Passport 4wd auto timing belt

if it help let me know

Posted on Sep 14, 2008

  • 6674 Answers

SOURCE: timing belt markings or resetting

Try this link. Good Luck, hope its what you needed. When you get there and want bigger picture, just click on the picture.

Posted on Oct 22, 2008

old marine
  • 1986 Answers

SOURCE: timing belt marks

Here's AutoZone online guide for this procedure.

Posted on Mar 11, 2009

  • 1675 Answers

SOURCE: 2000 honda ..... timing belt replacement

hi i have a diagram of it here and as far as i can see the marks on the twin cams are actually aligned with the top of the cover edge there should be an arrow on each cam pulley, that is pointing upwards, and you should have 2 marks either side horizontal and line up with the cover , the bottom crank pulley has a v cut out which lines up with a mark which is a angled line on the engine cover my picture may be different from your one if you want you can email me i will send you it so you compare it to your one
hope this helps

Posted on Feb 26, 2010

  • 1757 Answers

SOURCE: I need the factory marks and the mechanic marks

My apologies for the delayed response. I am going back to answer - unanswered questions. I have only been on this site for the past 4-months. Questions Posted have exploded (+55%) since joining.
I do not know if you still need this information, but I am answering it either way.

on the following LINK. It has the Timing Mark(s) Diagrams you will need. I've included both the 1996 and 1997.
If you would: Before Clicking let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at!
Again my sincerest apologies...
For the 1997:
For the 1996:

Posted on Mar 03, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need a diagram of a 1992 accord 2.2 engine

oil pump is in the oil pan at the bottom of the motor. are you looking for the water pump and timing belt

Jan 28, 2013 | 1997 Honda Accord

1 Answer

How to time the timing belt

Before removing the timing belt bring the engine to the timing marks and if your engine is working ok,then use the marks by using some reflecting paint . Loose the timing tensioner and remove the belt. fitting the new belt and tensioner be careful on the installation the marks to be on the marks and fit it. release the tensioner and tight it. Turn the engine by hand twice and re check the timing the covers crank pulley and mounting and start the engine.

Sep 08, 2012 | 1997 Honda Civic

1 Answer

1997 honda accord need diagram for timing belt marks

need help putting my 1997 honda accord in time.I got the cam pullie on top and crank top dead center.does the oil pump gear haft to go straght up too.and one more thing when we get the belt on it keeps tring to roll offneed help bad.Can anybody help please?

Jul 19, 2012 | Cars & Trucks

2 Answers

Changed the water pump on my 1997 passport & now the timing is off.

I assume you are talking about valve timing not igntion timing. If that is the case your water pump maybe run by the timing belt. If it is you would need to completely disassemble the timing cover and set the number one cylinder to TDC (top dead center) on the Compression stroke not the exhaust stroke. Once you do that line the timing marks up on cam gears with marks on the side of the head. Then install a new timing belt and tensioner. It is a good idea to always change the pump and belt together. I would suggest buying a manual for your specific vehicle for specific torque specs and exact locations of components and procedures.

Dec 03, 2009 | 1997 Honda Passport

1 Answer

How to get the timing belt off a 97 Honda Passport?

Ok this is pretty simple first of all this vehicle has a hydraulic tensioner so will nee to loose the two bolts that holds the hyraulic tenisor and remove tensioner completely and belt will become loose and can be removed. Its recommended that you change this tensioner when you do a timing belt job at about 60,00 miles. However if you choose to re-use tension it can be compressed(pushed back in with a bench vise and can be held in place for installion by a very skinny allen key of a wire type brake clip or something of that sort. Here is a diagram of your timing marks, conatct if you need more help Good Luck and thanks for using

Jan 14, 2009 | 1997 Honda Passport

1 Answer

Resetting timing on 1.4l 8v "R" Honda Civic

The white mark is the one indicating TDC. The red one indicates 12 degfrees befor TDC. If you don't have the belt on as yet, then the mark you are looking for will be on the crankshaft sprocket that the timing belt rides on. You line up that mark with the arrow on the block. This arrow is located directly above the crank sprocket.

May 19, 2008 | 1997 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides