Question about Cars & Trucks
Need to see the layout of the v belt on the cooling system
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Basically locate the tensioner which is a round black plastic pulley,
it should have a 13mm bolt through the middle of which, and an allen
key hole as well? This hole may also be in the form of a torx ?
There are so many difference types of engine it would be difficult to explain all of them.
On some tensioners you must put your 13mm (long) spanner onto the bolt and lever it toward yourself (from front of vehicle), this will allow slack on the belt, dont let go, have your assistant pull the belt off whilst you hold the tensioner off.
Then simply refit the belt / fit a new one. Dont forget the way it is routed, i.e draw picture of how the belt sits around each pulley.
Posted on Dec 14, 2008
SOURCE: Fan belt layout for Hilux LN106R
Posted on Apr 23, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls
Posted on Sep 23, 2009
Most likely to be a faulty resistor block, which has 3 resistors and a thermal fuse controlling fan speeds 1,2 and 3, maximum speed 4 by-passes the resister block. It may also be poor electrical connections to the resistor block caused by overheating. Renault ask for approximately £350 to carry out repairs, a replacement resistor block will cost £50. If you decide to carry out the repairs yourself, be advised that if you are not competent to carry out such work you, could cause electrical damage or worse an electrical fire.
Posted on Nov 14, 2009
Tips for a great answer:
May 03, 2017 | Renault Cars & Trucks
Jul 04, 2016 | Renault Cars & Trucks
May 14, 2016 | Renault Cars & Trucks
Aug 14, 2015 | 2002 Renault Megane
Jun 10, 2015 | Renault SCENIC Cars & Trucks
Dec 29, 2014 | 2006 Renault Scenic 1.6
Nov 22, 2011 | Cars & Trucks
Dec 12, 2010 | 2001 Renault Sportwagon
36 people viewed this question
Usually answered in minutes!