Question about 2000 Chevrolet Venture

Open Question

Replacing power steering pump 2003 venture

Hoe to replace power steering pump on 2003 venture

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chiquititas
  • 1010 Answers

SOURCE: 1987 Chevy G20 van replace power steering pump

Does your van have the serpentine belt? If so maybe I can help, I replaced the Power steering pump on my 90 G20 a couple of weeks ago. The trick is that you need to pull the pump pulley which is pressed on to access the mounting bolts which attach the pump to the engine. Harbor Freight tools sells a great tool designed for this job for $20.00. Once you have the correct tools, remove the serpentine drive belt. You may also need to remove the fan shroud. the pump shaft looks like it has an allen socket in the center, but this is for use in the manufacturing process, and will not come out. Place the puller tool on the pulley following tthe instruction that come with the tool, and remove the pulley. loosen, but do not remove the nut on the high pressure hose connection. use a pair of **** pliers to cut and remove the crimp clamp on the low pressure hose. If your pump has the remote reservour loosen the clamp on the reservour hose also. Remove the three mounting bolts, place a large pan under the pump to catch drips, and remove the prevously loosened hoses. there will be fluid leaking all over and the pump should come free, There are two types of replacement pump sold. With and without reservour. This reservour is a metal cover that fits over the back of the pump, and should not be confused with the reomte revervour found on some newer models which is next to the battery. This reservour is held in place be two throught the pump bolts which are removed at the back of the pump. If your new pump has a reservour you will probably still need to remove these bolts and put them in the replacement pump as most are shiped without these bolts. If you replacement pump comes without a reservour pull the bolts, the reservour should pull off of the old pump and slide onto the new one. check the o rings and replace the through the pump bolts. Installation is the reverse of removal execpt that 1/2" hose clamps replace the crimp clamps on the low pressure hose, and the puller tool is set up differently to replace the pulley. Finally if you don't flush contaminants out of the system your repair will last maybe a week. www.cardone.com has a great article about power steering flushing, read it before you start Good luck.

Posted on May 15, 2008

leetamara
  • 702 Answers

SOURCE: power steering - 1999 chevy silverado

You're going to have to bleed the system alot on those trucks. Just remove the return line and have an assistant turn the steering wheel back and forth just enough to engage the pump and filling the resevour while doing this. Keep bleeding until you have a good flow of P/S fluid out with no air bubbles. This can take a while.

Posted on Aug 24, 2008

gregr_41018
  • 43 Answers

SOURCE: replace power steering pump on 2000 Impala w/ 3.8

remove the 2 front motor mounts and rock the motor forward by pushing the car forward while in park. make sure you flip the mounts up onto the motor they will be out of the way of smashing the radiator ... once pushed forward lock e brake to hold it there .. that should give you plenty of room to work with

Posted on Apr 19, 2009

  • 462 Answers

SOURCE: 1997 Chevy Venture fuel pump replacement

UNFORTUNATELY YES

Posted on Jul 14, 2009

  • 141 Answers

SOURCE: remove the power steering pump pulley on a 2003 monte carlo

you can either remove the steering pump to gain access,if there is no holes in PS pump pulley,you can rent a pulley puller....can be a ***** to get in and use them though....I will drill a hole in it for next time whenever I replace a pump on cars without ....

Posted on Aug 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 310 2002 hoe has a wine or groul in the power steering. We have changed hyd oil and filters?


possible internal failure or bearing failure
take it to an accredited power steering shop for a proper diagnosis and quote

Nov 23, 2016 | Cars & Trucks

1 Answer

Need to replace power steering pump on 2003 venture van


It is hard especially if you dont have a hoist depending on engine its underneath.

Dec 03, 2012 | Cars & Trucks

1 Answer

Where is the power steering pump on 2002 chevy venture


You can see the power steering pump on the front
of the motor

It along with the alternator ,crank damper & sometimes
water pump,are driven by the same belt ,been that way for
a century

Oct 12, 2012 | 2000 Chevrolet Venture

3 Answers

Power steering and brakes stopped working in my 2003 GMC sierra 2500 HD..replaced water pump and belt..still not working..


You probably have hydroboost brakes and that system is powered by the power steering unit. If you have no steering and brakes, the first thing to check is the power steering pump. Check for low/no fluid. If the fluid is okay then the pump might not be pumping and you will need to replace it.

Dec 26, 2010 | 2003 GMC Sierra 2500HD

1 Answer

My power steering only works when the car is accelorating


your power steering belt is loose or you need to replace the power steering pump because it is loosing pressure. try the belt first.

Oct 26, 2010 | 2000 Chevrolet Venture

1 Answer

No power steering on 307 2003 replaced poer


make sure you bleed it well lock steering left and right and hold to make sure all pipe are full pf fluid and top up power steering

Mar 27, 2010 | 2005 Peugeot 405

1 Answer

Power steering pump leak


Usually it is the high pressure line. They have compressed fittings, and over time they begin to leak, due to the high pressure.

Mar 16, 2010 | 1998 Chevrolet Venture Cargo

2 Answers

I heard a noise when my car is running and if i slightly turn my stearing wheel


this is power steering pump noise, have a shop take a listen, they won't charge u for a diagnosis.

Jan 15, 2010 | 2003 Chevrolet Venture Passanger

Not finding what you are looking for?
2000 Chevrolet Venture Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...