Question about 2001 Toyota Corolla

Open Question

Location of pcv valve 2001 toyota corolla - 2001 Toyota Corolla

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 101 Answers

SOURCE: where is the pcv valve on 2005 toyota corolla

Remove the plastic engine covering the top of the engine by removing the 2 10mm nuts. Pull the cover off and standing in front of the car looking at the engine,the pcv is located in the rear of the valve cover on your left. There is a 3/8 id hoses attached to it. Pull the hose off and unscrew the valve with a 22mm socket..
If you look down at your exhaust manifold you will see a sensor sticking out that looks like a o2 sensor. It is not. Its an air fuel ratio sensor and it works totally different then a o2 sensor.THis is the sensor that helps adjust the air fuel mixture. If you follow the exhaust system back under the car about 1/2 way you will see another sensor in the exhaust . This is the o2 sensor and is used to monitor the condition of the convertor.
If you need one of these sensors you will have a check engine lite on with a AF or o2 code.

Posted on Apr 16, 2009

  • 736 Answers

SOURCE: Where is the PCV Valve located on 1993 Corolla?

very nice pictoral of where things are located on the corolla .for some reason the PCV valve does not seem to be listed but everything else is ...nice for general maritainence ..
http://www.corolland.com/repairs.html

here is what the valve looks like
http://www.autopartswarehouse.com/details/QQToyotaQQCorollaQQStandardQQPCV_ValveQQ19841993QQSIV245T.html

the valve is probably on the right side of the valve cover .. it has a thick vacuum hose going to the intake manafold .. it plugs into a rubber hole on the valve cover ...

Posted on Jul 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 2001 toyota four runner 3.4l cuts off at idle,why?


20 reasons,
top 2 are
1:egr stuck open
2; ISC stuck closed.

lots more, to find it you must do tests.

Oct 14, 2013 | 1990 Toyota Corolla

1 Answer

Replace the PCV Valve


extremely simple pill the pcv out of the valve cover and out or the line and reverse instalation

Aug 28, 2012 | 2001 Toyota Corolla

1 Answer

How and what to do the tuning on 2003 toyota corolla s?


Plugs, air filter, pcv Valve (located in valve cover) this valve is really important relieve buildup pressure, a clog pcv can create oil leaks, an open pcv can create a hard to start condition. Clean Throttle body and clean battery terminals. Note, toyota uses Japanese plugs DEnso, etc, when people go to autozone they love to give them bosh plug after some months of operation the plugs fail to perform properly giving low percentage missfire and creating fuel economy problems.

Dec 24, 2010 | 2003 Toyota Corolla

1 Answer

Where is the PCV Valve located on 1993 Corolla?


very nice pictoral of where things are located on the corolla .for some reason the PCV valve does not seem to be listed but everything else is ...nice for general maritainence ..
http://www.corolland.com/repairs.html

here is what the valve looks like
http://www.autopartswarehouse.com/details/QQToyotaQQCorollaQQStandardQQPCV_ValveQQ19841993QQSIV245T.html

the valve is probably on the right side of the valve cover .. it has a thick vacuum hose going to the intake manafold .. it plugs into a rubber hole on the valve cover ...

Jul 20, 2010 | 1993 Toyota Corolla

2 Answers

Where do I find the pcv valve and can I change it myself? If this is clogged or stuck does it cause oil to be all over under the hood and does it make the car use more oil?


Below is a diagram of your PCV valve. It's not a difficult repair to perform yourself as it's easily accessible. A clogged PCV wouldn't normally send oil throughout the hood. This is more likely a valve cover gasket. Look for pools of oil surrounding the valve cover. If you find seepage there, you've located the source of your oil consumption.

Nov 04, 2009 | 1998 Toyota Corolla

3 Answers

2001 Toyota corolla hesitates on acceleration


Basically this means that an oxygen sensor in bank 1 detected a lean condition (too much oxygen in the exhaust).

Mar 27, 2009 | 2001 Toyota Corolla

1 Answer

High oil consumption


Hello;
The PCV valve is located on the intake manifold. It screws in and there will be a hose to the valve cover. Pricey little devil I must say.
Thanks;
Rich
RPM Northwest

Jan 22, 2009 | 2003 Toyota Corolla

1 Answer

Where is the pcv valve on corolla 2001


hi blizotte
im dave
if you remove the plastic plenum on top of the engine being careful not to break it (the one that says VVT-I on it) you will notice a green valve with a hose running to it toward the passenger side. This is your pcv valve. Remove the hose, unscrew the valve (you'll need a wrench) and replace.

Jul 17, 2008 | Toyota Corolla Cars & Trucks

Not finding what you are looking for?
2001 Toyota Corolla Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...