Question about 1985 Ford Econoline
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Try this article. I have the same problem and I think it is the vacuum motor that controls the door for changing from hot/cold in the rear heater box (located inside behind the L rear wheel)
Posted on Jul 22, 2009
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
On yours, you can use atf but power "steering fluid" works just as well.. steering fluid is used as a specific requirement on later vehicles and if you use it in the 85, you can use the leftover to top off anything you have that is newer. (can't do that with atf)
Posted on Sep 04, 2009
check if there is any voltage reading at the fan blower wiring when activated,if there is an it still does not work then you may need a replacement blower...
Posted on Sep 05, 2009
On the side of your transmission will be a switch with several wires coming out of it. This is your reverse switch that turns on your reverse lights and most likely needs to be replaced
Posted on Oct 01, 2009
Tips for a great answer:
Sep 13, 2017 | Ford Cars & Trucks
Nov 16, 2016 | Ford Cars & Trucks
Apr 25, 2015 | Ford E350 Cars & Trucks
Aug 23, 2011 | 1985 Ford Econoline
Feb 13, 2010 | 2000 Ford Econoline
Jul 08, 2009 | 2002 Ford E350
May 08, 2009 | 2007 Ford E-350 Super Duty Length XLT
Jan 21, 2009 | 1987 Ford Econoline
46 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: