Question about 2002 Ford Taurus

Open Question

Where is the Heater control valve on a 2002 ford taurus

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 783 Answers

SOURCE: Heater Control Valve 2000 Taurus SE

Taurus doesn't have what is called a heater control valve,are you reffering to the remote climate control module,the one that the vacuum lines hook to? If so it is behind the glove box. Just open the glove box and press the 2 clips on the sides so it opens all the way up and it will be located right behind this.

Posted on Jan 29, 2009

  • 79189 Answers

SOURCE: 2002 ford taurus fuse panel?

Here is the owners manual from the Ford web site, fuses are under ROAD SIDE EMERGENCIES

Posted on Nov 02, 2008

  • 79189 Answers

SOURCE: how to remove 2002 ford taurus radiator

Remove the rad support cover, remove the electric cooling fan and shroud, disconnect the tranny cooler lines, drain the cooling system, remove the upper and lower hoses, remove the rad brackets on top of the rad (one on each side), have someone hold the AC core out of the way and carefully slide the radiator up and out

Posted on Nov 24, 2008

michigan man
  • 3533 Answers

SOURCE: 2001 ford taurus . i need the vacuum diagram so i

you can try your local library for a diagram and pictures showing you how you can also try this website:

Posted on Mar 08, 2009

  • 14 Answers

SOURCE: IAC control valve. Locato\ion 2002 ford escape

If it's not idling and has problems starting, it's probably the IAC motor. It's located on the throttle body. Follow the airfilter box all the way to the engine, where the rubber flex hose attaches. The throttle body should be the first aluminum part you come to. Attached to the side you'll find small little aluminum part with a small wire harness attached. Unplug it, take the IAC motor off and clean inside with carb cleaner. This should fix the problem with the idle.

Posted on Sep 11, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where's the heater control valve on a 2002 Ford Taurus wagon and

There isn't a valve in the heater hoses, the temp of the heater inside the car is controlled by a door inside the heater box. It opens and closes by an actuator controlled by the heater temp selector.

Oct 12, 2017 | Ford Cars & Trucks

2 Answers

2002 ford taurus, ac blows hot air constantly.

So many things,Hannah,can be wrong to cause that. Did it fail all at once? Describe what happens EXACTLY. What make and model car? What year? What size engine? How many miles on vehicle? Any collisions recently?
don-ohio (:^)

Jan 12, 2017 | 2002 Ford Taurus

2 Answers

2002 Ford Taurus, Heater blows cold air?

What have you checked so far ?
Radiator full of coolant ? Heater hoses getting hot ?

Feb 23, 2015 | 2002 Ford Taurus

1 Answer

Where is the heater control valve located on a 97 ford taurus

The Taurus does not have a heater control valve. Coolant flows through the core at all times.

Jan 13, 2011 | 1997 Ford Taurus

1 Answer

My 2002 ford taurus has no heat, i have replaced the temperature sensor, the water pump, 2 thermostats, heater core is not leaking antifreeze overflow bucket has new cap? what else could my problem be?

I have the same vehicle...check to see that the heater control valve is opening...usually mounted on the fire wall and has about a 5/8" inch hose that come from the esentially bypasses the heater core when the heat is not selected. The hoses going through the fire wall on the left (passenger) side of the vehicle are strictly for the heater - it "heat" is selected and those hoses are cold - based on what you've already done, the next conclusion would be the heater control valve...could be something as simple as a disconnected vacuum line.

Good Luck,


Nov 28, 2009 | 2002 Ford Taurus

2 Answers

My 2002 Taurus will not heat up inside the car when the engine is up to temp. Stays cold inside, heater only blows slightly warm air. What is the problem?

have the heater core flushed seperately from the rest of the system i have seen this on this model many times

Nov 12, 2009 | 2002 Ford Taurus

1 Answer

2002 Ford Taurus has no heat

Look for a blocked heater hose (kinked, pinched, or collapsed), or a valve (either electrically or vacuum controlled) in the line that isn't opening. Feel both hoses when the engine is hot and set for heat. One should be hot and the other cooler when operating normally. If both are cool, then something is blocking water flow through the heater core.

Aug 21, 2009 | 2002 Ford Taurus

1 Answer

Burnt oil smell coming from heater

make sure the pvc valve is in place on the valve cover on the passenager side and also make sure the oil filter does not have a double gasket on it cause this will make it leak and the fan would blown oil back on the engine

Feb 23, 2009 | 2002 Ford Taurus

Not finding what you are looking for?
2002 Ford Taurus Logo

Related Topics:

353 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

5681 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides