Question about 1999 Dodge Dakota

Open Question

1999 Dakota Rear sound and speakers not working (SLT Regular Cab)

I am in the process of adding a subwoofer and sub amp to my Dakota. I tapped into the left rear speaker wire for the aftermarket amplifier speaker level input. The rear speakers do not work not. Also, the new subwoofer does not have sound although the amp and sub are working properly ( I tested them to make sure). Does the stock dodge (Infinity) amp have a built in fuse? I checked the fuse panel but not the amp itself? I have installed amps and stereo systems for 20 years and have never had an issue like this. It also seems weird to me that the new sub doesn't have sound. What is going on?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chiquititas
  • 1010 Answers

SOURCE: 2002 Durango 4 x 4 SLT 4.7L - need to replace broken door speakers

Well its simple, just take your door panel off.

Posted on Jun 19, 2008

Red 4x4
  • 1 Answer

SOURCE: 2000 Dodge Dakota Quad Cab

There is a 10A & 20A fuse located under the dash on the BACK of the fuse box.
Replace the 20A and your done.

Posted on Dec 01, 2008

  • 290 Answers

SOURCE: needing wiring diagram for 1991 dodge dynasty le

here is what I found:
http://www.the12volt.com/installbay/stereodetail/715.html

Posted on Mar 26, 2009

motor1258
  • 6674 Answers

SOURCE: removed factory stereo and installed after market

Have a look at this link, may help.
http://www.the12volt.com/installbay/stereodetail/710.html

Posted on Jul 11, 2009

  • 1 Answer

SOURCE: radio wiring diagram with Infinity Sound System and amp location

where is the location of the amp in a dodge truck 2005

Posted on Sep 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Window quit working on passenger side


Check fuse
Check door switches
Then remove the door panel &
continue on with the testing of switches
& look the window regulator over & the
motor

Aug 10, 2013 | 2007 Dodge Dakota Cab SLT

1 Answer

HELP! PLEASE FAST


you can disconnect the sub from the car and test it to see if its blown by hooking it up to a regular house stereo. depending on what type of sub u have not all of them have protective fuses to shut it down before it blows. i always reccomend having more wattage on your speakers than your amp to add as a failsafe.

Jul 29, 2010 | 2002 Ford Expedition

2 Answers

Speaker removal


Good day,
In your trunk there are 2 small amps. The first amp is connected to your car speakers. The second amp is connected to your subwoofer. Once you locate the subwoofer amp. Your subwoofer amp will be the amp close to the sub enclosure. Unplug the subwoofer from the amp. Your next step is to unscrew the 4 10mm bolts so that you can remove the sub enclosure. At this point you can now remove the enclosure. It will take a some time as it always seems to be up there pretty good. But once it starts to move it should come out with little work. I hope this helps with your removal of the subwoofer.

Mar 08, 2010 | 1995 Lincoln Town Car

2 Answers

2002 Yukon XL with Delco Stereo only has front passenger speaker working and the sub. High end sound coming out of driver front speaker, nothing from 2nd row speakers. Is this wiring issues or problems...


sound like the head unit's out put mosfet is going bad, but i have also ran in to this problem when it was a speaker wires shorting out. so first check the connection on your rear speakers.

Oct 15, 2009 | 2002 GMC Yukon XL

1 Answer

Trying to install a subwoofer on a 97 crown vic


Make sure you are using a 12volt DC system in both units. It may sound simply but an AC sub may need an inverter. Also check grounds.

May 21, 2009 | 1997 Ford Crown Victoria

2 Answers

1999 explorer stock subwoofer


I would be very proud of that truck as the sub that came with the truck was only a 8". The only one that works is the factory model as it is a 1 1/2 - 2 ohm speaker; replacements are 4ohm. You will have to replace the amp as well if you put in an aftermarket sub. Oh and apparently the amp will have to have "speaker level" inputs as opposed to pre-amp inputs. I have a 1999 Eddie Bauer wih a blown sub and I'm trying to decide what to do as well. The speaker is $400 with tax in Canada! Good luck.

Mar 06, 2009 | 1998 Ford Explorer

Not finding what you are looking for?
1999 Dodge Dakota Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...