Question about Chevrolet Equinox

Open Question

My 2010 Equinox will go in reverse, but when I put it in drive, the gear doesn't engage?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
rouseinator2
  • 24 Answers

SOURCE: 2000 chevrolet tahoe - can't put the gear stick in

It sounds to me as if the cable isnt adjusted properly. I would check with the shop that put the tranny in and see if they could check the adjustment on the cable, more than likely when they put in the new trans they didnt bother to adjust the cable for the replacement transmission

Posted on Mar 05, 2009

Ad
hardinfarms
  • 144 Answers

SOURCE: car does not drive forward but works in reverse

Sad to say but your automatic transmission has bit the dust.

Posted on Jul 24, 2009

  • 832 Answers

SOURCE: gear stuck on reverse. Put on drive gear still in

Have your gearbox checked. Stucked up issue,
is often caused by a worn out part, (Bearing, or
bushing, or geartrain.

Posted on Sep 21, 2009

  • 10 Answers

SOURCE: reverse gear not engaging

the gear box has to be repair bcoz sometime due toimproper gear shifting the tooth of gear get cuts which may leads to such type of the problem k

Posted on Apr 29, 2010

  • 5520 Answers

SOURCE: 2001 f350 v10 automatic transmission will not engage gears

You may have a shift cable on that model. If the either end of the shift cable has come loose, then the movement of the shifter will do nothing underneath your truck. You need to have a helper move the shift lever while someone goes under the truck to see if the cables move.

Some of the trucks use Electric shift Solenoids. The PCM is a Powertrain Management device and there is a relay. I imagine if this part is not working, there would be no power to activate the Electric shift Solenoids and that could explain why your truck does not move.

Posted on Nov 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix 06 chevy equinox shifter its only engaging in drive?


Check you transmission fluid, if it is low, it will not engage the other gears

Feb 22, 2015 | 2006 Chevrolet Equinox

1 Answer

2010 ford focus automatic trsnsmission makes rubbing noise when accelerating from acomplete stop . noise continues until 2nd gear engages. from then on all is fine. reverse sometimes doesnt engage, ma


A carrier bearing usually pertains to the differential assembly and would not cause the symptom you describe. There is a problem with this transmission that causes it to not drop completely to first gear after a period of driving. Ford is aware of it but I do not believe they have initiated a recall. Call your Ford dealer(s) to see if you can find an honest man. Ask for the service manager.

Mar 25, 2014 | 2010 Ford Focus 1.6

1 Answer

No reverse light, all fuse good. reverse Switch?


It's not that simple anymore . The transmission range sensor switch is what they have now . This range sensor informes the PCM - engine computer what gear the vehicle is in. When you put the gear selector into reverse B+ voltage from the range sensor to the PCM tells the PCM reverse has been selected , the PCM then will energize the reverse lamp relay (located in the under hood fuse/relay box) there by turning on the reverse lamps . There are two fuse's in the under hood fuse/relay box . F27 10amp. & F35 10amp.

Aug 11, 2017 | 2010 Ford Escape XLT

1 Answer

I just bought a transmission for my 2003 lincoln navigator but when I put it in gear it doesn't go in drive or reverse until I put it in drive 2 first then into reverse or drive. what is causing t


Is that a used unit?

If so-- then that is some elses junk

That valve body is dirty
Solenoids dirty

Can't be rebuilt or a decent unit,
with those problems

Mar 15, 2013 | Lincoln Navigator Cars & Trucks

1 Answer

My auto transmission for a Ford 2004 Escape with 2WD only engages in reverse. When problem suddenly showed up i was able to drive car in front drive by engaging 1 or 2. stopped car and all forward mov


I would have it towed to a different shop for a second opinion.
To start at the beginning, if it works in reverse but not drive the linkage is working.
When you put the transmission in low or second you are bypassing most of the sensors and valves. You put it in first or second gear and it stays there.
It could be a long list of things from the valve body to the pump to a solenoid or sensor.
There is a good chance the problem could be fixed without needing an overhaul.
You never take a knife to a gunfight, so you wouldn't have anybody but a transmission shop work on a transmission.
When they recommend an overhaul, they are pulling your trans out and replacing it with someone's rebuilt out of the crate. No worries on their part.

Feb 16, 2013 | 2004 Ford Escape XLT

1 Answer

Manual transmission reverse is blocked


Hi Mitch, If when engaging first gear you have a grinding and clunk try pumping the clutch pedal before engaging reverse. My reason for saying that is that if the pedal takes low to the floor you may have a defective hydrolic clutch line. If it doesn't work I think I would suspect a bent selector rod. Regards John

Jun 24, 2012 | 1990 Chevrolet K1500

1 Answer

1996 Jeep Grand Cherokee. Transmission problems. when the gear selector is in reverse, it doesn't engage in reverse. When you go to neutral, it drives forward but doesn't shift through the...


Put the vehicle in Park, disconnect the shifter from the shift lever on the trans, adjust the linkage or cable so the connection is clearly a slip in/on connection and tighten things back up. Hopefully this will solve your non-reverse. As for all the gunk and metal shavings, friend, you better have another tranny standing by in your garage when this one stops working completely.

Jun 09, 2017 | Jeep Grand Cherokee Cars & Trucks

1 Answer

When i start the truck its fine when i put it in forward gears it doesnt want to move for a couple seconds the it catchs and starts to move same in reverse just slugish could it be the torque conveter ot...


Try putting it in neutral before putting it in drive. the pump doesn't engage in park and sometimes the fluid leaks back out of the torque converter. I have the same problem in my 2004 Ram 3500 and 70 Challenger.

Jun 05, 2011 | 1996 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...