Question about 2004 Mazda 6

1 Answer

Hello I went to auto zone and brought a new battery they put it in for me and the horn would go off and the lights as well as the windshield wipers they disconnected the horn and it turns out i have a after market anti theft system that the owner prior to me had put in.... they sent the car to a mechanic to see why my car wouldnt start and they are saying that it looks like they blew a few fuses and or the battery blew the computer.... any suggestons or help would be recommened im so upset i shouldve just took my cAR to pep boys but no i had to save $30 and look what happened... plz help

Posted by on


1 Answer

You should have found a shop that has been in the same location
with the same owner for 25 years or more

Get it out of wherever it is & use a knowlegeable shop with a data
base --so they can help you

Posted on Dec 04, 2012


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 2004 rx8 6 speed I put new battery in it and the horn blares not like car alarm type but just steady honk and the lights come on and the windshield wipers and my dash won't light up or anything!

Wrong, or still dirty connections... remove battery post bolts and clean or replace these bolts...reassemble with new battery and try again...

Oct 31, 2013 | Cars & Trucks

1 Answer

How to replace a windshield wiper arm?

go to auto put in model make year windshield wiper blade removal and install instruction and pics

Nov 17, 2012 | 1998 Ford Crown Victoria

1 Answer

Flashing dome light, broken horn, and slow windshield wipers... what can it be?

if your hearing a clicking sound when pushing the horn button then it sounds like you need to replace the horn the diaphram is probably no good.if it was a bad connection you wouldn`t hear a clicking noise.the slow wipers sounds like it could be a poor ground on the wiper can run a separate ground wire to the wiper body and if the wipers work at a normal speed then that is all you have to do.if not then the power wire needs to be checked for battery voltage if its good then the problem is likely the wiper motor itself.the flickering interior light may be the light switch maybe moving just enough to make contact to allow power to the light.make sure the switch is into the off position and see what happens.

Jan 10, 2012 | 2004 Pontiac Sunfire

1 Answer

Horn, windshield wipers, windshield cleaner randomly going off

I am having the same problem on my 08 wrangler sahara unlimited. I was told it was because of a loose battery connection. I checked and the connections are fine.

Aug 01, 2010 | 2008 Jeep Liberty

1 Answer

I have a 1996 Dodge Caravan 3.3L Van. Battery was installed incorrectly,and the horn,windshield wipers,and lights went crazy,toasted the fusible link.Battery is installed correctly,all fuses have been...

you need to check the grounds if they shorted the sytem they may have damaged the grounds one bad connection can cause lots of problems if it will drive you could take to auto zone an they will run codes an tell you whats wrong if you can not drive it google your van an ask how to read codes it will tell you how to jump the connector an read codes from the check engine light

Aug 01, 2010 | 2000 Dodge Caravan

1 Answer

After turn on windshield wipers, they will not

There is two place that you can check which would cause this problem. (1) the switch it self and the other is the (2) circuit board on the wiper motor. It's common for the solder on the circuit board where the wire harness clips on the wiper motor to crack and needs to be re soldered. You can buy the replacement at Auto Zone or you can re solder it your self to safe you the $15.00 for the board. If you give it a light tap and the wipers stop, then it's the circuit board. If it keeps working, then it's the switch on the steering column and you can get that at Auto Zone also and they will have the step by step instructions for you to get the hob done with common tools. Good luck and keep me posted.

Jan 07, 2010 | 1992 Pontiac Sunbird

1 Answer

Battery Light warning

check for bad or lose connection at the battery

Mar 18, 2009 | 2003 Volkswagen Beetle TDI

1 Answer


battery went dead because the rear windshield wiper didn't go off during the night, as soon as you put a new battery, the wiper start to working and won't stop. probably the switch out of order, A/C doesn't work, check the fuse.

Jul 27, 2008 | Dodge Grand Caravan Cars & Trucks

2 Answers

Replacing a horn

On my 1995 Explorer the horn is located under the battery, close to the signal light on the driver's side.

Jul 25, 2008 | 1998 Ford Explorer

Not finding what you are looking for?
2004 Mazda 6 Logo

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides