Question about Dodge Cars & Trucks

Open Question

Picuture of the valet/overide button on a 2007 dodge durango

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 62 Answers

SOURCE: 2007 dodge durango

Clock Setting Procedure
1. Press and hold the time button until the hours blink.
2. Adjust the hours by turning the right side Tune /
Audio control.
3. After the hours are adjusted, press the right side Tune /
Audio control to set the minutes.
4. Adjust the minutes using the right side Tune / Audio
control.

Owner's Manual under: INSTRUMENT PANEL AND CONTROLS 195


If this works please give me a rating on my solution, thanks!

OpenSource13


http://www.fixya.com/PostAnswer.aspx?thid=2028796&prdid=696996 where to find your Owner's Manual
4

Posted on Apr 19, 2009

  • 412 Answers

SOURCE: I have a 1999 Dodge durango and the alarm is stuck

TRY LOCKING ALL DOORS,THEN UNLOCK PASSENGER SIDE FRONT DOOR WITH KEY..THIS SHOULD DISARM SYSTEM..IF NOT,REMOVE TRIM PLATES AT LF DOOR AND LOOK FOR ANY BROKEN WIRES UNDER TRIM AND CARPET..I HOPE THIS HELPS

Posted on Aug 01, 2009

co7196
  • 3433 Answers

SOURCE: Taking apart the dash in my 2007 dodge durango

Experienced mechanics avoid that task.

Posted on Oct 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can a security system be reprogramed in a 2004 Durango with a 5.7 hemi


Try this Instructions
    • 1Press the "Unlock" button on the remote keyless entry device.
    • 2 Insert the key into the ignition. Turn the ignition switch to "ON" without starting the engine.
    • Sponsored Links
    • 3 Press and hold the valet/override button below the steering column within five seconds of turning the ignition on.
    • 4 Release the valet/override button when the security light on the instrument panel stops blinking. The alarm is reset and disabled.


Read more

Jan 11, 2015 | 2004 Dodge Durango

1 Answer

Where is the valet button override button in 2004 dodge durango


the
valet/overide button, found under the
dash area

Mar 25, 2014 | 2004 Dodge Durango

1 Answer

WHERE CAN I PICK UP A NOTHER REMOTE FOR MY ALARM 98 DODGE DURANGO ALARM


they didnt come with factory remote start. figure out how to go into valet mode and that should at least temporarily solve your problem.

Sep 03, 2012 | 1998 Dodge Durango

1 Answer

My glove box valet lock is on, how do I override


Your black ended driver key should open the glove box. The valet key is not made to open it, thats the safty feature in it. There is no overide for the Valet settings, you have to unlock the glove box with Driver (master or black) key and turn the Valet switch off. Also the Valet switch does not engage the glove box lock so over riding the Valet security wouldnt open it even if you could over ride. If the Valet key would unlock it or was easy to overide then it wouldnt be a very good safety feature. Best of luck, hope you can get it opened.

Jul 28, 2010 | 2001 Oldsmobile Aurora

1 Answer

Valet switch location


I own a 1998 dodge durango and Keyless entry does not work all the time and sets my alarm off. There is a valet switch which will perminately disarm the alarm, but I a unsure of it;s location under the dash. Can you help me with this.

Jul 02, 2010 | 2000 Dodge Durango

1 Answer

I have a 1999 Dodge durango and the alarm is stuck in activate mode, the hand held remote won't shut it off, I can't start my car. Help! I have unhooked the battery....I have looked for a reset...


TRY LOCKING ALL DOORS,THEN UNLOCK PASSENGER SIDE FRONT DOOR WITH KEY..THIS SHOULD DISARM SYSTEM..IF NOT,REMOVE TRIM PLATES AT LF DOOR AND LOOK FOR ANY BROKEN WIRES UNDER TRIM AND CARPET..I HOPE THIS HELPS

Aug 01, 2009 | 1999 Dodge Durango

2 Answers

How do i disable alarm for my 1996 thunderbird lx 4.6


Ok, try this.
Put the key in the ignition, and turn forward
all the way just before cranking. Then within
5 seconds, press and hold in the valet/overide
button, found under the dash area in most cases,
until the installed LED (the blinking light)
in your dash area comes on solid.
(Your valet switch might be the toggle (on/off) type.
in this case, key on, flip switch in oposite direction,
key off.)

This should be valet. This overides
the starter kill relay in the alarm harness,
and returns the car back to disarmed mode.

The only thing that will work now on your system,
is the keyless entry if installed.

Just Repeat these steps to rearm your system.

Feb 18, 2009 | 1996 Ford Thunderbird LX

1 Answer

I want to turn off factory installed alarm in 1999 Ford Taurus SHO but where is the switch located?


Hi there. As far as the valet/overide button, it's a hidden
device-switch, a little spring loaded micro button,
red or black possibly and is probably down under
the dash area, near your knee/leg. In some
remote start/alarm combos, the antenna on the window
glass will also have an override/valet button.
Older sytems will have a flip type toggle switch.

When you locate the button or switch,
turn on the ignition key, press and hold
in the button until the alarm chirps 1 time
(for toggle types, key on, flip switch in the
opposite direction, then key off). This should over ride the system. You would get a single chirp to confirm from the siren.
The LED (light emiting diode) light in the dash
should also go on solid. This is valet/overide/reset.
This should correct any issues like starter disable,
or anti-hijack. Your keyless entry, if installed,
will still be operable. The have it inspected for the
falsing issues you are experience at a local shop.
You would repeat the same steps to toggle back into user mode.

Sep 01, 2008 | Ford Taurus Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...