Question about 1999 Mitsubishi Montero Sport

Open Question

Head bolt torque for 1999 mitsibishi montero sport 3.0

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
ewashmidas
  • 362 Answers

SOURCE: torque specs for the main bearings, connecting rods and heads

Here you go...

Connection Rod Nuts: 37-38 Ft Lbs.
Main Bearing Caps: 55-61 Ft Lbs.
And Head Bolts...

1st - step; - 80 ft./lbs. 2nd - step, loosen all bolts; 3rd - step; - 80 ft./lbs.
69de06e.png

Posted on Jan 24, 2009

Ad
STEVIE_N_24
  • 147 Answers

SOURCE: 1999 Mitsuishi Montero sport 2H shift light flashing

Bad 4wd position sensor located on transfer case or bad sensor located on right front axle housing for 4wd engagement position.

Posted on Mar 29, 2009

  • 94 Answers

SOURCE: Need Montero Sport 1999 Owner Manual

ebay.com item number: 280368223458

Posted on Jul 09, 2009

  • 617 Answers

SOURCE: 1999 mitsubishi montero sport cruise control issue.

possible bad speed sensor, get computer codes

Posted on Feb 04, 2010

  • 1 Answer

SOURCE: Montero Sport, Automatic transmission fluid change

I definetly highly reccomend you to use Mitsubishi genuine Diamond SPIII Fluid, you'll feel your transmission more powerfull, and will help you to keep it just like new. I've tried with "Import multivehicle" from Castrol but a within 6 months the gears began to slip.

Posted on May 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Main bearing cap torque 6g74


Torque Specifications

air intake plenum 11-14 ft lbs.

camshaft bearing cap 14-15 ft lbs.

connecting rod nut 37-38 ft lbs.

camshaft sprocket bolt 66-67 ft lbs.

crankshaft pulley bolt 108-116 ft lbs.

cylinder head bolts 65-72 ft lbs. ( 3.0L) 76-83 ft lbs. (3.5L)

drive plate ( flywheel ) 53-55 ft lbs.

exhust manifold 11-16 ft lbs.

intake manifold 11-15 ft lbs.

main bearing cap 55-61 ft lbs.

rocker shaft 14-15 ft lbs.

valve cover 27-35 in. lbs.

throttle body bolt 84-108 in. lbs.

May 17, 2012 | 1996 Mitsubishi Montero Sport

1 Answer

How do i know if the cylinder head bolts on my 1990 plymouth colt are torque to yield


They are torque to yield if they require a final extra degree turn (like 90, or 45 degrees) in the headbolt tightening torque values listed in the repair manual.

Nov 19, 2011 | Cars & Trucks

1 Answer

Head bolt sequence and torque values on a 1999 Chevy 3.1L engine


if the 8th number om your VIN is a "J" then this is the correct prossess 3.1LTorque sequence --------- ' 6 2 3 7 ' ' 5 1 4 8 ' --------- Step 1: torque in sequence to 37 Ft/Lbs Step 2: turn an additional 90 degrees recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.Always coat bolt threads with the proper sealant.

if the 8th number on your VIN is a "M" then this is the correct prossess 3.8LTorque sequence --------- ' 6 2 3 7 ' ' 5 1 4 8 ' --------- Step 1: torque in sequence to 37 Ft/Lbs Step 2: turn an additional 90 degrees recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.Always coat bolt threads with the proper sealant.

Oct 12, 2011 | 1999 Chevrolet Malibu

1 Answer

How do you remove the strater motor on a 1997 Mitsubishi Magna


Starter Motor -1997 Mitsubishi Montero Sport REMOVAL & INSTALLATION
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Remove or disconnect the following:
    • Negative battery cable
    • Engine under cover, if equipped
    • Front engine mount heat protector
    • Starter cover
    • Wires
    • Starter motor
    To install:
  3. Install or connect the following:
    • Starter motor and cover. Torque the bolts to 20-25 ft. lbs. (26-33 Nm).
    • Wires
    • Front engine mount heat protector. Torque the nut to 89 inch lbs. (10 Nm).
    • Engine under cover, if equipped
    • Negative battery cable Fig. 1: Starter motor mounting 9308ug03.gif
prev.gif next.gif

Nov 05, 2010 | 1999 Mitsubishi Montero Sport

1 Answer

How do I get the front end rotors off a 2001 Mitsibishi Montero Sport?


take tire off, remove the two bolts on the back side of the brake caliper, remove brake caliper(with a coat hanger/stiff wire suspend caliper for it does not strain the brake line, remove rotor. Hope this helps Tim

Oct 15, 2010 | Mitsubishi Montero Sport Cars & Trucks

1 Answer

Head bolt torques spec


3.8L V6

cylinder head bolt torque

step 1 37 ft lbs.

step 2 an additional 130 degrees

step 3 4 center bolts an additional 30 degrees

Jul 07, 2010 | 1999 Buick LeSabre

3 Answers

1999 mitsubishi montero sport white smoke


the weakest link from water entering engine is intake manifold losing its torque. their are four water ports right next to valve ports. two in front two at rear of intake manifold. they warp fairly easy.so check before re installing

Jan 02, 2010 | 1999 Mitsubishi Montero Sport

2 Answers

Replacing cylinder head on 1986 montero with 2.6 timing chain. just need timing marks and head torque specs.


ok
42011354
  1. Torque all bolts except No. 11 to 69 ft. lbs. on a cold engine or 75 ft. lbs. on a hot engine.
  2. Torque cylinder head to chain case cover bolts (No. 11) to 156 inch lbs.
  3. 42011356

Sep 17, 2009 | 1986 Mitsubishi Montero

Not finding what you are looking for?
1999 Mitsubishi Montero Sport Logo

Related Topics:

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...