Question about 2006 Ford Escape
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: cruise control won't work
Does the on light in the dash come on? If not, you may have a broken switch in the steering wheel which is a fairly cheap repair. Otherwise, the controls work through the Printed Circuit Board in your dash (your instrument cluster) and the problem could be as simple as a solder defect or faulty component. The problem is that no Ford Service Technician that I know will touch this and tell you that you need to replace it.
The instrument cluster is very easy to replace but may cost you a few more dollars than you want to spend. I would have someone with an electrical background check the cruise control switches in your steering wheel with a multimeter before going any further with this. Also check the wiring for resistance leading from the switch to the cluster.
Posted on Aug 06, 2008
check for the presents of a switch on the tip of the master cylinder. these switches are problematic. if no switch on master cylinder, switch will be on brake pedal above brake switch, this switch is plastic and breaks very easy
Posted on Aug 15, 2009
More likley you want to have the transducer or the electronic equivalent checked first. The actual lever and controls rarely malfunction. However if someone has indeed pulled the lever out, it should snap back into place with a slight inward push towards the steering column. Best of luck, Dana
Posted on Aug 28, 2009
SOURCE: cruise control will not engage
pull the plastic cover off the top of the engine and check where the cable from the cruise control connects by the throttle body. There is a plastic connector that might be broken. i had the same problem and a piece of tape fixed it for me but you can replace the part if your picky.
Posted on Sep 30, 2009
Tips for a great answer:
Jan 14, 2015 | 2012 Ford Escape
Jul 02, 2017 | 2002 Ford Escape
May 07, 2011 | 2005 Ford Escape
Jun 19, 2010 | 2004 Ford Escape
Jun 17, 2010 | 2003 Ford Escape
May 29, 2010 | 2001 Ford Escape
Sep 25, 2009 | 2001 Ford Escape
Feb 16, 2009 | 2006 Ford Freestar
Oct 06, 2008 | 2006 Ford Escape
Aug 06, 2008 | 2002 Ford Escape
40 people viewed this question
Usually answered in minutes!