Question about 2002 Ford Thunderbird

Open Question

What needs to be removed to install power mirror switch on 2002 thunderbird

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1986 Answers

SOURCE: Replace Passenger Side Mirror on 2002 Ford F-150

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

sscullys
  • 984 Answers

SOURCE: I need to replace the mirror switch from my 2002

The switch panel is held on with a spring clip on the front ( towards the point by the front of the truck ) and a tab to the rear ( towards arm rest / back of truck ).
If you want pictures, you can download the PDF version of the signal mirror directions from www.kwmuth.com. Obviously you only need the part for the switch panel. The switch is held on with 2 locking tabs to the switch panel.

Posted on Mar 22, 2010

elix0411
  • 3530 Answers

SOURCE: 2002 Thunderbird autolock left door

Welcome to Fixya

Please see procedure below on how to remove door panel:

Disconnect the battery ground cable.

Remove the door handle cup cover.
elix0411_10.gif

Remove the screw.

elix0411_11.gif

Remove the switch plate by lifting the front and moving it forward.

  • Disconnect the electrical connectors.
Remove the speaker grille.
  1. Release the front clips.
  2. Move the speaker grille forward.
elix0411_12.gif

Remove the speaker screws.

elix0411_13.gif

Remove the screws and the door trim panel.
  • Disconnect the electrical connectors.
elix0411_14.gif

To install, reverse the removal procedure.

Thank you for using Fixya!

Posted on May 10, 2011

richie9911
  • 155 Answers

SOURCE: 2002 thunderbird window won't go up or down replace swith still wont work fuse are ok does the switch get power

The master switch connector does have circuits that have power on them. The Master switch is not directly connected to the window motors. The switch sends a signal to the Front Electronic Module and the module controls operation of the motor on the driver side. The passenger door window motor is controlled by a different module

Posted on Nov 28, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 thunderbird window won't go up or down replace swith still wont work fuse are ok does the switch get power


The master switch connector does have circuits that have power on them. The Master switch is not directly connected to the window motors. The switch sends a signal to the Front Electronic Module and the module controls operation of the motor on the driver side. The passenger door window motor is controlled by a different module

Nov 28, 2012 | 2002 Ford Thunderbird

1 Answer

Side mirrors don't work


Usually there is a switch issue. The switch that allows you to select right, left or nuetral can go bad or get dirty and not allow power distribution. If you feel comfortable doing so, remove the trim and gain access to the switch. Using a test light or the schematics, find out which wire is the voltage supply and ensure it has power with the key in the on position but the motor need not be running. If no, suspect a fuse issue, if yes then suspect a switch issue. You can use a jumper wire to apply power to the mirror feeds (again a schematic would be greatly reccomended) and if the mirrors move, viola! I hope this helps

Jul 15, 2010 | 2002 Jeep Liberty

1 Answer

How do I attach a review mirror for a 1994 thunderbird lx


Go to an auto parts store and buy rearview mirror adhesive. Your rearview mirror will separate from the small mounting piece that adheres to the windshield. Clean off the glass where it will sit. Follow the directions on the adhesive package and install the mount on the windshield. Once it dries, install the mirror on the mount. Rearview mirror adhesive is one of the most powerful adhesives on the market. Don't use anything but rearview mirror adhesive or the mirror will not hold.

May 21, 2010 | 1994 Ford Thunderbird

1 Answer

Need a diagram for installing a drivers side electric power mirror on a 1995 mercury villager van


here's 1996, all I have. Please rate.

Mirror, Power — Outside Rear View NOTE: This procedure applies to both RH and LH power outside rear view mirrors.

Removal
  1. Remove the front door trim panel (23942). Refer to Section 01-05 for the removal procedure.
  1. Remove the two outside rear view mirror inside mounting hole cover screws and the outside rear view mirror mounting hole cover (17K709) from the front door (20124).




  1. Remove the wire clip.
  1. Disconnect the power outside rear view mirror electrical connector.




  1. Remove the three power outside rear view mirror bolts and the power outside rear view mirror.




Installation
To install, reverse the removal procedure. Tighten the three power outside rear view mirror bolts to 3-4 Nm (27-35 lb-in). Glass, Outside Mirror
Removal and Installation
Refer to the glass replacement procedures in Manual Mirror for power outside rear view mirror glass (17K707) Trim Cover
Removal
  1. Remove the front door trim panel. Refer to Section 01-05 for the removal procedure.
  1. Remove the two outside rear view mirror inside mounting hole cover screws.


    Remove the outside rear view mirror mounting hole cover.
Installation
To install, reverse the removal procedure. Mirror Control
Removal
  1. Use a small flat-blade screwdriver to pry the power outside rear view mirror control switch from the instrument panel (04320).


May 13, 2010 | 1995 Mercury Villager

1 Answer

2002 Saturn SL2 driver side mirror glass broken


Ebay, Craigslist, and local junkyards are a good place to find used mirrors.
They have the options, based on the junk cars in their yards and they can look around in other junkyards online to find the right one. I would not think you would pay more than 20-30 dollars. I had 4 saturns and replacing the mirrors was easy, but then I have a roll around tool box and 30 years of backyard wrenching experience. Basically you remove that interior cosmetic part at the front of your window, dig through the insulation, find the bolt heads and remove them. The mirror comes off and you reverse the process to install.

Apr 08, 2010 | 2002 Saturn S-Series

1 Answer

I need the power source for the remote mirror.. is it the green wire, on the switch?


I lost power to the mirrors broken wire, under the dash..
So I removed the switch panel on the door, and installed a jumper wire from the door lock circut, to power the mirrors. The green wire is the power supply wire for the remote mirror switch. My mirrors are back working and all is fine.

Oct 25, 2009 | 1990 Ford Thunderbird

1 Answer

Installing passenger side mirror on a 2002 ford tuarus


Very simple. Remove any fastners on the inside of the vehicle on that particular mirror. Pop the plastic cover off that is on the inside of the door (the piece that hides the nuts on that hold the mirror on).

Remove the fastners holding the mirror on and seperate the two. If it is a power mirror, you will have to pop the door panel off. Very simple to do.

If removing the door panel (power mirror), us a flat tool and pop the plastic fastners loose from the door. unscrew and screws for arm rests, door handles, door pulls, and switches. Once these are removed, lift and pull the door panel off and set aside. Locate the wire harness coming from the mirror and disconnect it.

Once it is disconnected, pull the mirror of while "feeding" the wire harness up and out of the door.....reveerse order to install.

Sounds hard but is actually very easy.

Email me with any questions at:

greg.bernett@mcchord.af.mil

Oct 02, 2009 | Ford Taurus Cars & Trucks

1 Answer

How to replace outside mirrors on a 2002 ford f-250 super duty


you need to remove door trim panel there are (2) 7mm screws that hold panel on .. 1 is behind the lower red light lens and the other is behind switch panel for the power window switch . remove both screws and remove small black panel above door trim by pulling strait off .(now there are (4) 11mm nuts the hold mirror on 2 are behind the small rubber plugs in front of door that you can see with panel on and the other 2 are under panel that you can see after panel is removed . the wiring need to be disconneced you may have to remove speaker for acess to feed new wiring down into the door good luck

Mar 10, 2009 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Side View Electric mirror can't adjust up enough for my height


You can manually push the mirror left or righ or up and down. It just ratchets on the plastic screw adjusters. It won't do any damage.
If you have floding mirros, make sure they are locked into position.

here's what inside looks like of 2002 mirror. I don't have 2005

6f1da12.gif
SECTION 501-09: Rear View Mirrors 2002 Taurus/Sable Workshop Manual
REMOVAL AND INSTALLATION Exterior Mirror Removal and Installation
All vehicles
  1. Remove the front door trim panel (23942). For additional information, refer to Section 501-05 .
Vehicles with Mach 40 speakers
  1. If equipped, remove the speaker grille.
  1. Remove the speaker bracket.
    1. Remove the screws.
    1. Remove the speaker bracket.
    • Disconnect the speaker electrical connector.
Vehicles with speaker delete panel
  1. Remove the speaker delete panel screw cover.
  1. Remove the speaker delete panel.
    1. Remove the screws.
    1. Remove the panel.
All vehicles
  1. Disconnect the power exterior rear view mirror electrical connector.
  1. Position the water shield aside.
  1. Remove the power exterior rear view mirror nuts.
  1. Remove the power exterior rear view mirror.
    1. Push down on the mirror assembly to release the mirror flange.
    1. Roll the mirror assembly down and rearward.

Jan 21, 2009 | 2005 Ford Taurus

1 Answer

Replace passenger mirror


  1. Remove the door inside handle as follows:
    1. Remove the screw and slide the handle forward.
    2. Disconnect the handle from the control link and remove the handle.
  2. Remove the door trim as follows:
    1. Remove the 2 caps and 2 screws.
    2. Using a screwdriver, remove the door trim upward then disconnect the connectors.
    3. Using a screwdriver, pry the forward of armrest panel and remove the panel.
    4. Remove the 2 screws and tweeter speaker.
    5. Disconnect the connector, remove the 5 screws and speaker.
    6. Disconnect the wire harness and remove the 2 grommets and service hole cover.
  3. Remove the cover and disconnect the power mirror connector.
  4. Remove the 3 nuts and outer rear view mirror.
To install:
  1. Installation is the reverse of the removal procedure.
  2. Tighten the mirror nuts to 8 Nm (71 inch lbs.).

Good luck...

Nov 11, 2008 | 2002 Toyota Tacoma

Not finding what you are looking for?
2002 Ford Thunderbird Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...