Question about Cars & Trucks
All aluminum washers are a one time use only. Everytime you change your oil you need to replace the washer. If you switch it out with a neoprene or fiber washer you can re-use it.
Posted on Dec 03, 2012
No more than most cars...just they sometimes need replaced, like any other car after repeated oil changes, the washer wears out and needs replaced
Posted on Dec 03, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you need a 6 inch extension, short 3/8 ratchet, 5/8 plug socket, 3/8 swivel "u" joint, (sold at sears) 8mm 1/4 drive socket deep well and 1/4 inch ratchet.
find the coil packs (6 total, three in each head.)
remove the two retaining nuts holding each coil pack using 1/4 8mm socket and ratchet.
twist the pack to break the sticking boot below.
pull up (be careful to not rip the boots however it may still happen but rare.)
remove coil packs, the rear is a little more difficult with the intake.
use 6" extension and u joint and ratchet to remove plugs and replace.
reverse order to assemble. Good luck, and hoped this helped.
Posted on Jan 04, 2009
SOURCE: oil change
Well it's bets to change it every 3000 miles. or every 2 months. It keeps slug to build up in your car. here's another tip for you change your radiator fluid once a year to keep it clean. hope this gets you in the right direction.
Best Regards Richard
Posted on Dec 29, 2009
The OBDII connector is located in the center console just behind the ashtray. There is a plastic cover that must be removed and you will find the connector behind the cover.
Posted on Jan 31, 2010
SOURCE: ACURA TL SERVICE DUE SOON B1
It's a service interval reminder light that you should take your car to acura and have them perform the "b1" service. I would ask for an estimate first, and ask what that service includes. You may be surprised to find necessary and unecessary services. Some people view the b1 light as a way for Acura to get you car in there, quite possibly be charged for things you could probably do yourself.
Posted on Apr 16, 2010
Tips for a great answer:
Apr 15, 2017 | Acura Cars & Trucks
May 09, 2015 | 2010 Acura TL
Nov 25, 2014 | 2006 Acura TL
Jun 22, 2014 | 1997 Acura TL Series
Jan 23, 2012 | 1998 Acura TL
Jan 11, 2010 | 1996 Acura TL Series
Jan 10, 2010 | 2004 Acura TL
Dec 08, 2009 | 2004 Acura TL
Oct 17, 2017 | Jeep Cars & Trucks
27 people viewed this question
Usually answered in minutes!